• Journal of Powder Materials
• /
• v.29 no.1
• /
• pp.22-27
• /
• 2022

Conventionally, metal materials are produced by subtractive manufacturing followed by melting. However, there has been an increasing interest in additive manufacturing, especially metal 3D printing technology, which is relatively inexpensive because of the absence of complicated processing steps. In this study, we focus on the effect of varying powder size on the synthesis quality, and suggest optimum process conditions for the preparation of AlCrFeNi high-entropy alloy powder. The SEM image of the as-fabricated specimens show countless, fine, as-synthesized powders. Furthermore, we have examined the phase and microstructure before and after 3D printing, and found that there are no noticeable changes in the phase or microstructure. However, it was determined that the larger the powder size, the better the Vickers hardness of the material. This study sheds light on the optimization of process conditions in the metal 3D printing field.

• Korean Chemical Engineering Research
• /
• v.49 no.5
• /
• pp.594-599
• /
• 2011

$SrAl_2O_4:Eu$ green phosphor was prepared by spray pyrolysis and its luminescence properties were controlled by replacing the Al sites with boron and using organic modifier or drying control chemical additive. It was clear that the substitution of B into the Al sites was helpful to obtain pure monoclinic $SrAl_2O_4$ phase and greatly enhance the emission intensity. In terms of the emission intensity, the optimal content of boron was about 1 at% with respect to the aluminum element. The luminescence intensity of $Sr_{0.9}Al_{1.98}B_{0.02}O_4:Eu_{0.1}$ phosphor could be improved by the use of 0.2 M organic additives in the spray solution. Futhermore, using 0.5 M dimethylformamide(DMF) as a drying control chemical with organic additives made it possible to improve about 172% the emission intensity of $Sr_{0.9}Al_{1.98}B_{0.02}O_4:Eu_{0.1}$ phosphor. According to XRD analysis, the organic additive and DMF used enhanced the crystallinity without any change in the crystal phase. When used only the organic additive without DMF, the surface area of the prepared $Sr_{0.9}Al_{1.98}B_{0.02}O_4:Eu_{0.1}$ phosphor became enlarged. The use of DMF with the organic additive resulted in significant reduction in the surface area. It was concluded that the increase of the crystallinity as well as the reduction of surface area mainly contribute to the improvement in the luminescence intensity of $Sr_{0.9}Al_{1.98}B_{0.02}O_4:Eu_{0.1}$ phosphor prepared using DMF and organic additives.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.23 no.6
• /
• pp.296-301
• /
• 2013

Carbon coils could be synthesized using $C_2H_2/H_2$ as source gases and $SF_6$ as an incorporated additive gas under the thermal chemical vapor deposition system. A 304-type stainless steel was used as a substrate with nickel powders as the catalyst. The surface of the substrate was pretreated using a sand paper or a mechanical drill to enhance the production yield of the carbon coils. The characteristics of the deposited carbon nanomaterials on the substrates were investigated according to the surface state on the stainless steel substrate. The protrusion induced by the grooves on the substrate surface could enhance the formation of the carbon nanomaterials having the coils geometries. The cause for the enhancement of the carbon coils formation by the grooves was suggested and discussed with the surface energies for the interaction between as-growing carbon elements. Finally, we could obtain the massive production yield of the carbon coils by the surface pretreatment using SiC sand papers on the several tens grooved stainless steel substrate.

• Korean Chemical Engineering Research
• /
• v.56 no.4
• /
• pp.592-599
• /
• 2018

An increase in the global production of biodiesel has resulted in the newfound significance of its byproduct, glycerol. The synthesis of acetins is an economical avenue to enhance the value of glycerol derived from biodiesel. WE developed an eco-friendly process for the synthesis of fuel additives from glycerol using a mixed oxide $SO{_4}^{2-}/CeO_2-Al_2O_3$ as catalyst. The $CeO_2-Al_2O_3$ mixed oxide was synthesized by the combustion method and then sulfated. The characterization of the catalyst was by means of XRD, BET, FTIR, and SEM. The influence of temperature, mole ratio and catalyst loading on yield and selectivity of the acetins was studied for the esterification of glycerol. The reaction rate constants ($k_1$, $k_2$ and $k_3$) were estimated using optimization method in MAT lab, and the activation energies ($E_1$, $E_2$ and $E_3$) were determined by the Arrhenius equation. Furthermore, a kinetic model was developed.

• Applied Biological Chemistry
• /
• v.48 no.3
• /
• pp.292-295
• /
• 2005

Synthesis of methyl 3-methyloctanoate, a perfume component isolated from African orchid Aerangis confusa (or Aerangis kirkii) was achieved starting from itaconic acid in 9 steps. Itaconic acid is one of the cheapest organic compounds which is the fermentation product of microorganism Asp. terreus. As the key intermediate, 2-methyl-1,4-butanediol 4-acetate was obtained through the enzymatic regioselective hydrolysis of 2-methyl-1,4-butanediol diacetate with lipase. After Grignard reaction and oxidation, 3-methyloctanoic acid was obtained and converted to the various corresponding scented esters with a variety of alkyl alcohols, and the resulting fragrancy esters are expected to be utilized as the aroma additive materials in cosmetics, drinks and foods.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.07b
• /
• pp.735-738
• /
• 2003

Downsizing electronics requires precision position control with an accuracy of sub-micron order, which demands development of ultra-fine displacive devices. Piezoelectric transducer is one of devices transferring electric field energy into mechanical energy and being capable for fine displacement control. The transducer has been widely used as fine Position control device Multilayer piezoelectric actuator, one of typical piezo-transducer, is fabricated by stacking alternatively ceramic and electrode layers several hundred times followed by cofiring process. Electrode material should be tolerable in the firing process maintaining at ceramic-sintering temperatures up to $1100{\sim}1300^{\circ}C$. Ag-Pd can be used as stable electrode material in heat treatment above $960^{\circ}C$. Besides, adding small quantity ceramic powder allow the actuator to be fabricated in a good shape by diminishing shrinkage difference between ceramic and electrode layers, resulting in avoidance of crack and delamination at and/or nearby interface between ceramic an electrode layers. This study presents synthesis of nano-oxide-added Ag/Pd powders and its feasibility to candidate material tolerable at high temperature. The powders were formed in a co-precipitation process of Ag and Pd in nano-oxide-dispersed solution where Ag and Pd precursors are melted in $HNO_3$ acid.

• Journal of the Korean Ceramic Society
• /
• v.47 no.6
• /
• pp.553-559
• /
• 2010

The synthesis behavior of nanoporous silica aerogel in the macroporous ceramic structure was observed using TEOS as a source material and glycerol as a DCCA(dry control chemical additive). Silica aerogel in the macroporous ceramic structure were synthesized through a sono-gel process. The wet gel in the macroporous ceramic structure were aged in ethanol for 72 h at $50^{\circ}C$. The aged wet gel was dried under supercritical drying condition. The addition of glycerol has a role of giving the uniform pore size distribution. The reproducibility of aerogel in the macroporous ceramic was improved in the glycerol(0.05 mol%) added to the silica sol and TEOS : $H_2O$=1 : 12.

• Archives of Pharmacal Research
• /
• v.27 no.3
• /
• pp.334-339
• /
• 2004

In this study, the effects of (-)-epigallocatechin-3-gallate (EGCG) and/or hinokitiol (${\beta}-thujaplicin$) on melanogenesis were investigated. Our results showed that both EGCG and hinokitiol significantly inhibited melanin synthesis in a concentration-dependent manner, and that their hypopigmenting effects were stronger than that of kojic acid, which is known to inhibit melanin formation in melanocytes and melanoma cells. Interestingly, EGCG did not show any additive hypopigmenting effect in combination with kojic acid, though EGCG did show a synergistic effect in combination with hinokitiol. Several reports indicate that the activation of extracellular signal-regulated kinase (ERK) induces microphthalmia-associated transcription factor (MITF) degradation. Accordingly, the effects of EGCG and hinokitiol on the ERK signaling pathway were examined. EGCG and hinokitiol induced neither ERK activation nor MITF degradation. On the other hand, both EGCG and hinokitiol reduced the protein levels of MITF and of tyrosinase, the rate limiting melanogenic enzyme, whereas kojic acid had no effect. In addition, hinokitiol strongly downregulated the activity of tyrosinase, whereas EGCG or kojic acid had only a little effect. These results show that both EGCG and hinokitiol reduce MITF production, and suggest that reduced tyrosinase activity by hinokitiol explains their synergistic effect on melanogenesis.

• Journal of Powder Materials
• /
• v.18 no.3
• /
• pp.269-276
• /
• 2011

The synthesis behavior of nanoporous silica aerogel in the macroporous ceramic structure was observed using TEOS as a source material and glycerol as a dry control chemical additive (DCCA). Silica aerogel in the macroporous ceramic structure was synthesized via sono-gel process using hexamethyldiazane (HMDS) as a modification agent and n-hexane as a main solvent. The wet gel with a modified surface was dried at $105^{\circ}C$ under ambient pressure. The addition of glycerol appears to give the wet gel a more homogeneous microstructure. However, glycerol also retarded the rate of surface modification and solvent exchange. Silica aerogel completely filled the macroporous ceramic structure without defect in the condition of surface modification (20% HMDS/nhexane at 36hr).

• Food Science and Industry
• /
• v.50 no.3
• /
• pp.93-104
• /
• 2017

monosodium L-glutamate (MSG), composed of 88% L-glutamic acid (GLU) and 12% Na, is considered as Generally Recognized as Safe. GLU is accounting for 15% of the total amino acid content in our body. Daily GLU intake is large 3.5-10.6 g from food and 1.3 g from food additive. The daily formed GLU in the body, via degradation of the total protein, is 48-50 g (70 kg of male) and the maintained GLU in the body is total bound GLU (1.4-2.0 kg) and free GLU (10 g). About 88% GLU are consumed at digestive tract, and only 12% GLU enter the blood stream. GLU is generally known to precursors of N-acetyl glutamate and glutamine, substrates for protein synthesis, a neurotransmitter (GABA), and the active site of the enzyme. In addition to protein synthesis, GLU has these key functions within the body, thus this amino acid is critical for healthy body maintenance and function.