• Tunnel and Underground Space
• /
• v.17 no.5
• /
• pp.389-410
• /
• 2007

For moderately jointed to massive rock masses, the failure and deformation behaviors around an excavated opening are absolutely influenced by the initial rock stress and strength of in-situ rock mass. The localized and progressive brittle failure around an opening does not mean whole collapse of an excavated opening. But, for many cases, it may induce temporary stopping of excavation works and reexamination of the current supporting system, which can result in delay of the entire construction works and additional construction cost. In this paper, the characteristics of the brittle failure around an opening with stress level and tunnel shape was studied by the biaxial compressive test using scaled specimen and by the numerical simulation with $PFC^{2D}$. The biaxial test results were well coincided with the stress induced failure patterns around the excavated openings observed and monitored in the in-situ condition. For the circular part of the opening wall, the stress induced cracks initially occurred at the wall surface in the direction of the minimum principal stress and contributed to the localized notch shaped failure region having a certain range of angle. But for the corner and straight part of the opening wall, the cracks initiated at sharp corners were connected and coalesced each other and with existing micro cracks. Further they resulted in a big notch shaped failure region connecting two sharp corners.

• Tunnel and Underground Space
• /
• v.17 no.5
• /
• pp.411-427
• /
• 2007

Reliability in tunnel analysis is necessary to accomplish technically sound design and economical construction. For this, a thorough understanding of the construction procedure including the ground-support interaction has to be obtained. This paper describes a proper modelling technique to simulate the behavior of the steel fiber reinforced shotcrete (SFRS) which maintain the supporting capability in post-failure regime. The additional supporting effect of the steel support was also verified by 3-D analyses and a new load distribution factor were proposed. The use of the plastic moment limit (PML) alone can eliminate the occurrence of the awkwardly high tensile stress in the shotcrete and can successfully model the post-peak ductile behavior of the SFRS. But with this method, moment is limited whenever the stress caused by moment reaches tensile strength of the shotcrete irrespective of the stress by axial force. Therefore, it was necessary to find a more comprehensive method which can reflect the influence of the moment and axial force. This can be accomplished by the proper use of "liner element" which is the built-in model in FLAC. In this model, the peak and residual strength as well as the uniaxial compressive strength of the SFRS can be specified. Analyses were conducted with these two models on the 2-lane road tunnels excavated in class IV and V rock mass and results were compared with the conventional elastic beam model. Results showed that both models can reflect the fracture toughness of the SFRS which could not be accomplished by the elastic beam model.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.27 no.9
• /
• pp.854-864
• /
• 2016

The use of small drone platform has become a popular topic in these days but its application for SAR operation has been little known due to the burden of the payload implementation. Drone platforms are distinguished from the conventional UAV system by the increased vulnerability to the turbulences, control-errors and poor motion stability. Consequently, sophisticated motion compensation may be required to guarantee the successful acquisition of high quality SAR imagery. Extremely limited power and mass budgets may prevent the use of additional hardwares for motion compensation and the difficulty of SAR focusing is further aggravated. In this paper, we have carried out a feasibility study of mico-SAR drone operation. We present the image acquisition results from the preliminary flight tests and a quality assessment is followed on the experimental SAR images. The in-flight motion errors derived from the unique drone movements are investigated and attempts have been made to compensate for the geometrical and phase errors caused by motions against the nominal trajectory. Finally, the successful operation of drone SAR system is validated through the focussed SAR images taken over test sites.

• Journal of the Korean GEO-environmental Society
• /
• v.11 no.8
• /
• pp.83-93
• /
• 2010

The purpose of this study is to present emergency rehabilitation, cause and the countermeasure of reinforcement about reinforced retaining wall and the slope collapse of the phyllite ground. The study area is broken easily because this area has rock mass discontinuity such as stratification, foliation, joint and fold. And this area consists of the ground where it happens easily to the failure of structure like reinforced retaining wall because of the phyllite ground sensitive to weathering. Counterweight fill in front of reinforced retaining wall was performed as emergency rehabilitation about displacement of reinforced retaining wall and the failure at the rear of slope on phyllite ground. After that, additional displacement didn't occur. Boring and geophysical exploration were launched to present emergency rehabilitation and develop the long-term method of reinforcement. This could grasp anticipated range of the failure section and identify internal and external factors of the cause of the slope collapse. Several methods of reinforcement were suggested by conducting the numerical analysis. When conducting design and construction of major structures at the ground which has complex discontinuities, the precise site investigation should be conducted. During construction, immediate action for over-displacement should be taken by performing the periodic measurement.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.8
• /
• pp.1735-1742
• /
• 2011

Now a days, as a mass-storage USB becomes comfortable to carry, function of USB is being developed fast. However, there is a problem that the personal information which is stored in USB could be exposed being used with negative purpose without other certification process. This paper suggests OTP(One-Time Password)-based certification protocol of USB to securely protect personal information stored in USB without additional certification information. The proposed OTP based certification protocol of USB not only demands low calculations but also prevents physical approach of USB of other network and does not allow unnecessary service access of user because it conducts simple action and uses one-way hash function. Therefore, communication overhead and service delay is improved. In the experiment, the proposed protocol compares and evaluates throughput of certification server according to the numbers of USB and delay time of packet certification with a device(USB driver) which simply save device and a device(USB Token) which can calculate by oneself. As a result, it is improved as the number of 12.5% in the certification delay time on average and is improved as the number of 10.8% in the throughput of certification server according to the numbers of USB.

• International Journal of Fluid Machinery and Systems
• /
• v.10 no.1
• /
• pp.40-46
• /
• 2017

Small valves including ball valves, gate valves and butterfly valves have been adopted in the fields of steam power generation, petrochemical industry, carriers, and oil tankers. Butterfly valves have normally been applied to fields where in narrow places installing the existing valves such as gate valves and ball valves have proven difficult due to the surrounding area and the heavier of these valves. Butterfly valves are used to control the mass flow of the piping system under low pressure by rotating the circular disk installed inside. The butterfly valve is benefitted by having simpler structure in which the flow is controlled by rotating the disc circular plate along the center axis, whereas the weight of the valve is light compared to the gate valve and ball valve above-mentioned, as there is no additional bracket supporting the valve body. The manufacturing company needs to acquire the performance and life test equipment, in the case of adopting the improving factors to detect leakage and damage on the seat of the valve disc. However, small companies, which are manufacturing the industrial valves, normally sell their products without the life test, which is the reliability test and environment test, because of financial and manpower problems. Furthermore, the failure mode analysis of the products failed in the field is likewise problematic as there is no system collecting the failure data on sites for analyzing the failures of valves. The analyzing and researching process is not arranged systematically because of the financial problem. Therefore this study firstly tried to obtain information about the failure data from the sites, analyzed the failure mode based on the field data collected from the customers, and then obtained field data using measuring equipment. Secondly, we designed and manufactured the performance and life test equipment which also have the real time monitoring system with the naked eye for the butterfly valves. The concept of this equipment can also be adopted by other valves, such as the ball valve, gate valve, and various others. It can be applied to variously sized valves, ranging from 25 mm to large sized valves exceeding 3000 mm. Finally, this study carries out the life test with square wave pressure, using performance and life test equipment. The performance found out that the failures from the real time monitoring system were good. The results of this study can be expanded to the other valves like ball valves, gate valves, and control valves to find out the failure mode using the real time monitoring system for durability and performance tests.

• Analytical Science and Technology
• /
• v.27 no.6
• /
• pp.352-356
• /
• 2014

Various studies have been done to improve the properties of the steel by adding boron to the steel. Some studies have reported on the analysis of the boron in steel by AAS (atomic absorption spectrometry), ICP-OES(inductively coupled plasma-optical emission spectrometry), ICP-MS (inductively coupled plasma/mass spectrometry). The volatile loss of boron of steel in sample digestion and the separation procedure for avoiding matrix effect by high concentration of iron are difficulties for determination of boron in steel. The method to determine boron in steel by ICP-MS was developed without volatilization of boron in sample digestion step with $HNO_3-NH_4HF_2$ digestion method, and the additional separation process for avoiding matrix effect. Complete decomposition of steel with $HNO_3-NH_4HF_2$ digestion method, and boron determination by ICP-MS in the matrix of high concentration of iron were possible. Quantitative recoveries of boron in certified standard steel by new method in this study were 103 to 111%, and the relative standard deviation is less than 5%. The method detection limit was $1.17{\mu}g/g$.

• Clinical and Experimental Pediatrics
• /
• v.50 no.3
• /
• pp.292-297
• /
• 2007

Purpose : Kawasaki disease (KD) rarely occurs in school-aged children. We clarified the characteristics of KD in this age group to provide tips for a high index of suspicion. Methods : Features of 38 patients with KD who were 7 years of age or older were retrospectively reviewed. Results : The incidence of the KD patients ${\geq}7years$ was 4.9 percent. The ratio of male to female was 2.5:1. Of the 38 patients, nine patients (24.0 percent) were diagnosed with typical KD and 29 patients (76.0 percent) with incomplete KD. In incomplete KD patients, cervical lymphadenopathy (69.0 percent) occurred most frequently, followed by conjunctival injection (62.0 percent) and polymorphous rash (45.0 percent). These patients occasionally presented with other additional symptoms including abdominal pain, headache, vomiting and arthralgia. Incomplete KD was initially diagnosed as cervical lymphadenitis (34.0 percent), viral infection (14.0 percent), scarlet fever (7.0 percent), meningitis (7.0 percent), and Kikuchi disease (7.0 percent). Coronary complications were noted in 15 patients (39.0 percent). Of the 37 patients treated with intravenous immunoglobulin, five (14.0 percent) were resistant to the therapy and all had coronary abnormalities. Conclusion : Most patients with KD ${\geq}7years$ of age have incomplete presentations. They tend to have a higher incidence of initial presentations of unilateral neck mass and coronary artery involvement. In school-aged children, fever and cervical lymphadenitis or suspected neck infection unresponsive to intravenous antibiotics should signal the possibility of KD. A high index of suspicion and prompt treatment is essential in this age group of patients.

• Journal of Veterinary Clinics
• /
• v.32 no.3
• /
• pp.247-250
• /
• 2015

A 10-year-old spayed female Pomeranian dog weighing 3.65 kg was presented with a 7-month history of urinary incontinence, stranguria and hematuria. The patient had mass lesions at left prescapular region ($3cm{\times}3cm$) and left axillary region ($5cm{\times}4cm$). Diagnosis of transitional cell carcinoma (TCC) with multiple cutaneous metastasis was made. Dog was treated with chemotherapy using mitoxantrone and piroxicam for 5 months. Although TCC size of urinary bladder was decreased during chemotherapy, there was no change of subcutaneous tumor size and mild relief of clinical signs. Partial anorexia for 3 weeks and multiple masses were noted at left caudal abdominal wall and left medial thigh (203 days after first presentation) and assessed as chronic kidney disease and additional subcutaneous metastasis of urinary bladder TCC by post-mortem and histopathological findings.

• Journal of Veterinary Clinics
• /
• v.27 no.3
• /
• pp.232-239
• /
• 2010

Two cell lines derived from spontaneous canine mammary gland tumors were established and characterized. Mammary gland tumors from 9 years old pug and 9 years old toy-poodle dogs were collected by aseptic surgical resection and primary culture was performed. The histopathologic examination of tumors revealed adenocarcinoma and complex carcinoma and two dogs died from metastasis of the tumors. The tumor cells were subcultured over 60 times for more than 1 year and morphological consistency maintained. Light microscopic examination, growth curve, doubling time calculation, xenotransplantation to female nude mice, immunohistochemistry for wide spectrum keratin, vimentin, $\alpha$-smooth muscle actin and cytokeratin 8 was performed for characterization. The cell lines exhibited polygonal, elongated cell shape and cytoplasmic bridge and doubling time of 47.1 hrs and 18.6 hrs, respectively. Subcutaneous xenotransplantation to nude mice of the cells produced localized palpable mass within 4 weeks in 4 of 5 and 5 of 5 nude mice, respectively. In immunohistochemical examination one cell line showed strong positive against wide spectrum keratin and cytokeratin 8 and the other cell line showed strong positive against smooth muscle actin and cytokeratin 8. Additional characterization would be possible by investigator's needs and the cell lines may be useful for in vivo and in vitro studies of canine mammary tumor and adjuvant therapies.