• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.53 no.2
• /
• pp.107-113
• /
• 2004

This paper develops a adaptive fuzzy controller based fuzzy logic control for high performance of permanent magnet synchronous motor(PMSM) drives. In the proposed system, fuzzy control is used to implement the direct controller as well as the adaptation mechanism. The operation of the direct fuzzy controller and the fuzzy logic based adaptation mechanism is studied. A model reference adaptive scheme is proposed in which the adaptation mechanism is executed by fuzzy logic based on the error and change of error measured between the motor speed and output of a reference model. The control performance of the adaptive fuzzy controller is evaluated by simulation for various operating conditions. The validity of the proposed adaptive fuzzy controller is confirmed by performance results for PMSM drive system.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.53 no.9
• /
• pp.569-575
• /
• 2004

This paper is proposed adaptive fuzzy-neural network(FNN) controller for high performance of induction motor drive. The design of this algorithm based on FNN controller that is implemented using fuzzy control and neural network. This controller uses fuzzy rule as training patterns of a neural network. Also, this controller uses the back-propagation method to adjust the weights between the neurons of neural network in order to minimize the error between the command output and actual output. A model reference adaptive scheme is proposed in which the adaptation mechanism is executed by fuzzy logic based on the error and change of error measured between the motor speed and output of a reference model. The control Performance of the adaptive FNN controller is evaluated by analysis for various operating conditions. The results of analysis prove that the proposed control system has strong high performance and robustness to parameter variation. and steady- state accuracy and transient response.

• Proceedings of the KIEE Conference
• /
• 2002.04a
• /
• pp.79-81
• /
• 2002

This paper develops a adaptive fuzzy controller based fuzzy logic control for high performance speed controller in permanent magnet synchronous motor(PMSM) drives. In the proposed system, fuzzy control is used to implement the direct controller as well as the adaptation mechanism. The operation of the direct fuzzy controller and the fuzzy logic based adaptation mechanism is studied. A model reference adaptive scheme is proposed in which the adaptation mechanism is executed by fuzzy logic based on the error and change of error measured between the motor speed and output of a reference model. The control performance of the adaptive fuzzy controller is evaluated by simulation for various operating conditions. The validity of the proposed adaptive fuzzy controller is confirmed by performance results for PMSM drive system.

• Proceedings of the KIEE Conference
• /
• 1991.07a
• /
• pp.771-776
• /
• 1991

In this paper. an indirect adaptive controller for manipulator which is composed of two controller structure is considered. One is feedforward controller in which the dynamics equation solved and the other is feedback controller in which the output error compensated. This controller has a good performance, but the computation burden of the feed forward controller keep from real time control. At this point, we proposed the two time adaptive controller where the sampling time of the feedforward controller is quite longer than that of the feedback controller. By the computer simulation, this proposed two time adaptive controller shows good performance in the view of accuracy in spite of decreasing computational burden.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.9 no.10
• /
• pp.1087-1094
• /
• 2014

In general, a speaker generates nonlinear distortions owing to a design principle, manufacturing process, and so on, which decreases and changes a sound quality. So, if the speaker is linearized by compensating these nonlinear distortions, the sound quality and satisfaction can be increased. In this paper, a new adaptive controller was proposed to be applied for compensating nonlinear distortions of a speaker. Through computer simulations as well as the analytical analysis, it could be shown that it is possible for both conventional adaptive controller and proposed adaptive controller, to be applied for linearizing the speaker with nonlinear distortions. Also, the simulations results demonstrated that the proposed adaptive controller may have faster convergence speed and better capability of compensating the nonlinear distortion than the conventional adaptive controller with nearly equal computation complexity.

• Journal of Biosystems Engineering
• /
• v.21 no.3
• /
• pp.283-292
• /
• 1996

Automatic guidance of farm tractors would improve productivity by reducing operator fatigue and increasing machine performance. To control tractors within $\pm$5cm of the desired path, fuzzy and adaptive steering controllers were developed to evaluate their characteristics and performance. Two input variables were position and yaw errors, and a steering command was fed to tractor model as controller output. Trapezoidal membership functions were used in the fuzzy controller, and a minimum-variance adaptive controller was implemented into the 2-DOF discrete-time input-output model. For unit-step and composite paths, a dynamic tractor simulator was used to test the controllers developed. The results showed that both controllers could control the tractor within $\pm$5cm error from the defined path and the position error of tractor by fuzzy controller was the bigger of the two. Through simulations, the output of self-tuning adaptive controller was relatively smooth, but the fuzzy controller was very sensitive by the change of gain and the shape of membership functions. Contrarily, modeling procedure of the fuzzy controller was simple, but the adaptive controller had very complex procedure of design and showed that control performance was affected greatly by the order of its model.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.51 no.11
• /
• pp.510-513
• /
• 2002

In this paper, the robust adaptive controller design scheme is studied for nonlinear systems in the presence of bounded disturbances A new robust adaptive controller is designed using high-order neural networks, which avoids the singularity problem in adaptive nonlinear control. The stability of the resulting adaptive system with the proposed adaptive controller si guaranteed by suitably choosing the design parameters and initial conditions. I addition, the proposed adaptive controller provides improved transient performance and fast on-line adaptation. The ability and effectiveness of the proposed adaptive control scheme is shown trough simulations of a simple nonlinear system.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.30B no.9
• /
• pp.106-121
• /
• 1993

A New fuzzy adaptive controller which is able to solve the problems of classical adaptive controllers and conventional fuzzy adaptive controllers is suggested in this paper. The architecture of a fuzzy adaptive controller using the robust property of a fuzzy controller is explained. A design procedure which can be carried out mathematically and systematically from the model of an objective system is suggested, and related mathematical theorems and their proofs are also given. The performance of the proposed adaptive control algorithm is analyzed through a design example and a DC motor control simulation.

• 제어로봇시스템학회:학술대회논문집
• /
• 1996.10b
• /
• pp.840-843
• /
• 1996

This paper presents an adaptive cutting force controller for milling process, which can be attached to most commercial CNC machining centers in a practical way. The cutting forces of X,Y and Z axes measured indirectly from the use of currents drawn by AC feed-drive servo motors. A typical model for the feed-drive control system of a horizontal machining center is developed to analyze cutting force measurement from the drive motor. The pulsating milling forces can be measured indirectly within the bandwidth of the current feedback control loop of the feed-drive system. It is shown that indirectly measured cutting force signals can be used in the adaptive controller for cutting force regulation. The robust controller structure is adopted in the whole adaptive control scheme. The conditions under which the whole scheme is globally convergent and stable are presented. The suggested control scheme has been implemented into a commercial machining center, and a series of cutting experiments on end milling and face milling processes are performed. The adaptive controller reveals reliable cutting force regulating capability under various cutting conditions.

• Proceedings of the KIEE Conference
• /
• 1986.07a
• /
• pp.132-135
• /
• 1986

This paper shows that using the multivariable controller reduces the magnitude of fluctuations of the control signals which result improved control of the steam generator outputs. Comparison of the performance of the multivariable weighted adaptive controller(MWAC) with the performance of the existing PI controller and the self_tuning controller/1/, when the system goes through a transient mode, shows that the out-puts stay closer to their set points when they are controlled by the adaptive controller.