• 대한전기학회논문지:전력기술부문A
• /
• 제52권8호
• /
• pp.444-449
• /
• 2003

In this paper present Autonomous Adaptive Digital Over Current Relay for distribution networks which acts autonomous setting using the short circuit impedance measured by relay of power systems. Automation of relay setting is one of the basic requirements for distribution automation, although manual relay setting is used at present. The short circuit impedance from a power source in distribution networks essential for the Autonomous Relay Setting changes frequently in distribution networks. In this paper the short circuit impedance is calculated with voltage and current measured in real time operation of digital relay using the Recursive Least Squares. A new method of digital relay setting is introduced using the the short circuit impedance and load current.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 하계학술대회 논문집 A
• /
• pp.6-8
• /
• 2002

In this paper present Autonomous Adaptive Digital Over Current Relay which acts autonomous setting using voltage and current measured by relay in the change of power systems. Automation of relay setting is required for distribution automation although manual relay setting is used at present. This paper presents Autonomous Relay Setting which knows change of the power system and acquires setting element using the Recursive Least Squares. Relay setting is very difficult work. But proposed relay is expected to decrease burden of relay setting using acquired information of power system change and autonomous setting. Also fast protective ability is expected according to change of power system.

• ETRI Journal
• /
• 제40권3호
• /
• pp.318-329
• /
• 2018

Femtocell (FC) technology envisaged as a cost-effective approach to attain better indoor coverage of mobile voice and data service. Deployment of FCs over macrocell forms a heterogeneous network. In urban areas, the key factor limits the successful deployment of FCs is inter-cell interference (ICI), which severely affects the performance of victim users. Autonomous FC transmission power setting is one straightforward way for coordinating ICI in the downlink. Application of intelligent control using soft computing techniques has not yet explored well for wireless networks. In this work, autonomous FC transmission power setting strategy using Adaptive Neuro Fuzzy Inference System is proposed. The main advantage of the proposed method is zero signaling overhead, reduced computational complexity and bare minimum delay in performing power setting of FC base station because only the periodic channel measurement reports fed back by the user equipment are needed. System level simulation results validate the effectiveness of the proposed method by providing much better throughput, even under high interference activation scenario and cell edge users can be prevented from going outage.

• 전기학회논문지
• /
• 제56권9호
• /
• pp.1521-1526
• /
• 2007

This paper presents the application of Adaptive Evolutionary Algorithm (AEA) to search an optimal setting of overcurrent relay coordination to protect ring distribution systems. The AEA takes the merits of both a genetic algorithm (GA) and an evolution strategy (ES) in an adaptive manner to use the global search capability of GA and the local search capability of ES. The overcurrent relay settings and coordination requirements are formulated into a set of constraint equations and an objective function is developed to manage the overcurrent relay settings by the Time Coordination Method. The domain of overcurrent relays coordination for the ring-fed distribution systems is a non-linear system with a lot of local optimum points and a highly constrained optimization problem. Thus conventional methods fail in searching for the global optimum. AEA is employed to search for the optimum relay settings with maximum satisfaction of coordination constraints. The simulation results show that the proposed method can optimize the overcurrent relay settings, reduce relay mis-coordinated operations, and find better optimal overcurrent relay settings than the present available methods.

• Journal of Electrical Engineering and Technology
• /
• 제11권6호
• /
• pp.1590-1599
• /
• 2016

The installation of distributed generation (DG) in the electrical networks has numerous advantages. However, connecting and disconnecting of DGs (CADD) leads to some problems in coordination of protection devices due to the changes in the short circuit levels in the different points of network. In this paper, an adaptive method is proposed based on available setting groups (SG) of relays. Since the number of available SG is less than possible CADD states, a classifying index (CI) is defined to categorize the several states in restricted setting groups. Genetic algorithm (GA) with a suitable objective function (OF) is used as an optimization method for the classification. After grouping, a modified coordination method is applied to achieve optimal coordination for each group. The efficiency of the proposed technique is demonstrated by simulation results.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 C
• /
• pp.893-895
• /
• 1998

This paper presents the adaptive setting method of distance relay under the single line ground fault. The apparent impedance measured at the relaying point and actual impedance is different because of fault resistance and various prefault loading condition. For a resistance earth fault detection, relay setting zone is adaptively changed with measured load current and bus voltage at the relaying point to avoid maloperation.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1993년도 하계학술대회 논문집 A
• /
• pp.61-63
• /
• 1993

This parer propose an adaptive methodlogy for setting of the underfrequency relays that is based on the initial rate of change of the frequency at the relay. During severe emergencies which result in insufficient power generation to meet load, an automatic load shedding program throughout the affected area can prevent total collapse. To avoid this kind of insufficient power generation, load shedding relays are often applied throughput the system to provide a means of helping balance the load to the remaining generation. Comparing, it has been found that the use of the proposed method for the amount and the timing of load shed more efficiently than the conventional method.

• 한국전자통신학회논문지
• /
• 제18권2호
• /
• pp.241-250
• /
• 2023

본 논문에서는 적응형 초음파 빔포밍 시스템에 LMS 알고리즘을 이용하는 때에 초기치 설정이 스텝 파라미터의 여유도에 미치는 영향을 연구하였다. 이를 위하여 임의로 설정한 빔폭을 갖는 준이상 빔과 회전 빔에 대한 빔포밍에 대해서 검토하였다. 수치 실험은 초음파 빔포밍 시스템에 임의의 초기치(음원수는 임의의 수로 고정)를 설정하고, 이에 대한 스텝 파라미터의 여유도와 수렴 특성 등을 비교하였다.

• 한국산학기술학회논문지
• /
• 제19권1호
• /
• pp.1-11
• /
• 2018

다양한 공학분야의 최적화 문제를 해결하기 위해 적절한 매개변수를 설정하기란 번거로운 작업이며, 매개변수 민감도 분석을 통해 적절한 매개변수를 설정하더라도 설정된 매개변수가 모든 문제에 적절한지 판단하기에는 한계가 있다. 이러한 이유로 매개변수를 문제에 따라 적절하게 설정하는 매개변수 자동검보정 (Self-adaptive) 화음탐색 알고리즘이 개발되고 발전하고 있다. 본 연구에서는 지금까지 개발된 자가적응형 하모니서치를 조사하고 그의 특성을 해탐색, 설정 매개변수, 적용성 등으로 구분하였으며, 이 중 매개변수 설정의 번거로움을 없애고, 적절한 매개변수 설정을 통해 해의 성능 향상을 위해 개발 된 6 가지 자가적응형 화음탐색 알고리즘을 선택하여 비교 분석을 수행하였다. 최적화 결과의 객관적인 비교를 위해 대표적인 수학적, 공학적 최적화 문제를 모두 적용 하였고, 다양한 성능 지수 (Performance index)를 사용하여 각 알고리즘의 성능을 정량적으로 비교하였다. 이것은 향후 신규 최적화 알고리즘을 개발하거나 해 탐색의 성능을 향상시키는 연구에 도움이 될 것으로 기대된다.

• 응용통계연구
• /
• 제29권1호
• /
• pp.27-39
• /
• 2016

본 논문은 다차원의 시계열 자료 분석에서 효율적인 희박벡터자기회귀모형에서의 모수 추정에 대해서 연구한다. 희박벡터자기회귀모형은 영에 가까운 계수를 정확이 영으로 둠으로써 희박성을 확보한다. 따라서 변수 선택과 모수 추정을 한꺼번에 할 수 있는 lasso를 이용한 방법론을 희박벡터자기회귀모형의 추정에 쓸 수 있다. 하지만 Davis 등(2015)에서는 모의실험을 통해 일반적인 lasso의 경우 영이아닌 계수를 참값보다 훨씬 더 많이 찾아 희박성에 약점이 있음을 보고하였다. 이에 따라 본 연구는 희박벡터자기회귀모형에 adaptive lasso를 이용하면 일반 lasso보다 희박성을 비롯한 전반적인 모수의 추정이 매우 유의하게 개선됨을 보인다. 또한 adaptive lasso에서 쓰이는 튜닝 모수들에 대한 선택도 아울러 논의한다.