• Proceedings of the IEEK Conference
• /
• 2000.06d
• /
• pp.54-57
• /
• 2000

In this paper, we propose a new interpolation method by using the motion between two moving image frames. In the proposed method, the movement is detected by using neighborhood pixels of target pixel in the past frame and the present frame. Then, H-shaped pseudomedian filter (below HPMED) is used for the still part of the image and Delta-shaped interpolation filter (below $\Delta$-shaped) for used in the moving part of the image. We detect the movement by comparing the differences between pixels in 4${\times}$5 window of the past frame and the present frame; the difference has a critical value. We simultaneously accomplish checking PSNR(peak signal noise ratio) and subjective assessment that is placed the focus on edge characteristic for assessment of result in computer simulation. The results show that the proposed adaptive method is better than the conventional methods.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.44 no.5
• /
• pp.73-83
• /
• 2007

In this paper, we propose macroblock(MB)-based adaptive interpolation filter method for improving coding efficiency in H.264/AVC. In the proposed method, nine separable two-dimensional(2D) interpolation filters are applied for precisely compensating motions in various directions. The optimal cost function which considers the bit rate and distortion for coding the MB is defined. The filter is adaptively selected per MB for minimizing the defined cost function. In the experimental results, the proposed method shows more excellent in coding efficiency than the conventional methods for the various standard $QCIF(176{\times}144)/CIF(352{\times}288)$ video test sequences. It leads to about 6.25%(1 reference frame) and 3.46%(5 reference frames) bit rate reduction on average compared to the H.264/AVC.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.45 no.6
• /
• pp.108-116
• /
• 2008

In this paper, we propose an algorithm that can estimate the distance using disparity based on stereo vision system, even though the obstacle is located in long ranges as well as short ranges. We use sub-pixel interpolation to minimize quantization errors which deteriorate the distance accuracy when calculating the distance with integer disparity, and also we use enhanced adaptive fuzzy strong tracking Kalman filter(EAFSTKF) to improve the distance accuracy and track the path optimally. The proposed method can solve the divergence problem caused by nonlinear dynamics such as various vehicle movements in the conventional Kalman filter(CKF), and also enhance the distance accuracy and reliability. Our simulation results show that the performance of our method improves by about 13.5% compared to other methods in point of root mean square error rate(RMSER).

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.39 no.4
• /
• pp.418-428
• /
• 2002

In this paper, we propose a motion-adaptive de-interlacing method using motion compensated interpolation. In a conventional motion compensated method, a simple pre-filter such as line averaging is applied to interpolate missing lines before the motion estimation. However, this method causes interpolation error because of inaccurate motion estimation and compensation. In the proposed method, EBMF(Edge Based Median Filter) as a pre-filter is applied, and new matching method, which uses two same-parity fields and opposite-parity field as references, is proposed. For further improvement, motion correction filter is proposed to reduce the interpolation error caused by incorrect motion. Simulation results show that the proposed method provides better performance than existing methods.

• IEIE Transactions on Smart Processing and Computing
• /
• v.3 no.3
• /
• pp.128-134
• /
• 2014

A real-time, continuous-scale image interpolation method is proposed based on a bilinear interpolation with directionally adaptive low-pass filtering. The proposed algorithm was optimized for hardware implementation. The ordinary bi-linear interpolation method has blocking artifacts. The proposed algorithm solves this problem using directionally adaptive low-pass filtering. The algorithm can also solve the severe blurring problem by selectively choosing low-pass filter coefficients. Therefore, the proposed interpolation algorithm can realize a high-quality image scaler for a range of imaging systems, such as digital cameras, CCTV and digital flat panel displays.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2009.01a
• /
• pp.623-627
• /
• 2009

Recently, we have many kinds of picture format and display, and resizing (scaling) of picture becomes important. In this processing, quality of picture depends on re-sizing method. For this, some methods to improve the PSNR have been proposed. However, subjective picture quality is more important. Especially, degradation caused by re-sizing, such as jaggy (aliasing) and ringing, should be reduced. To solve them, we have proposed the method using directional adaptive interpolation. To improve the performance of this method, we consider the shape analysis this time. In the proposed method, directional adaptive processing is applied for pure edge only. In the texture area and flat area, 8 tap re-sampling filter is used. As the results of processing, the reductions of jaggy and incorrect interpolated pixels are recognized. The subjective picture quality of proposed method is significantly better than 8-tap re-sampling which gives good PSNR.

• Proceedings of the KSME Conference
• /
• 2008.11a
• /
• pp.1204-1209
• /
• 2008

Design is important in the IT, digital appliance, and auto industries. Aesthetic and art images are being applied for better design satisfaction of the products. Various artistic image patterns are used to satisfy demand of design, but it takes much lead-time and effort to implement them for making dies and molds. In this paper, a hybrid reverse engineering method generating accurate 3D engraving models from 2D art images is proposed through image processing, 3D reconstruction, and NURBS interpolation methods. In order to generate the 3D model from the 2D artistic image, cloud points with z-depth are extracted according to intensity values of the image. An adaptive median filter and harmonic filter are used to obtain the intensity values accurately. NURBS surfaces are generated through the interpolation of the cloud points. Performance of the developed system is to be confirmed through the realization of Mona Lisa and Golden Gate Bridge.

• Proceedings of the Korean Institute of Communication Sciences Conference
• /
• 1996.06a
• /
• pp.467-471
• /
• 1996

• Journal of Korea Society of Industrial Information Systems
• /
• v.12 no.1
• /
• pp.39-45
• /
• 2007

In this paper, we present a new postprocessing algorithm using interpolation and signal adaptive filter according to the each block characteristic which is acquired in block classification process. We applied blocking artifact reduction algorithm for four neighbor low frequency block and ringing artifacts is removed with preserving edges by applying a signal adaptive filter in high frequency block based on edge map. The computer simulation results confirmed a better performance by the proposed method in both the subjective and objective image qualities.

• Proceedings of the IEEK Conference
• /
• 2000.09a
• /
• pp.889-892
• /
• 2000

본 논문에서는 효과적인 De-interlacing을 위한 Edge based Median Filter와 3-Step AMPD(Adaptive Minimum Pixel Difference Filter)를 제안한다. Motion Adaptive De-interlacing 방법에서 중요한 요소인 Motion Hissing에 의한 에러를 방지하기 위해 입력 영상을 4 가지 유형으로 구분하여 각 영상에 따라 다른 임계 값을 적용하여 정확한 화소 값을 보간 하는AMPD(Adaptive Minimum Pixel Difference) Filter를 사용하며 Moving Diagonal Edge의 효과적인 보간을 위해서 방향 필터를 사용하여 Edge Map을 추출한 뒤 Edge에 따라 가변적인 후보 화소를 선택하는 Edge based Median Filter를 사용하여 성능을 향상시켰다. 또한 입력되는 영상을 움직임 영역, 정지 영역, 경계 영역으로 나누어 적응적으로 보간 하여 연산 효율을 높였다. 제안된 방법은 다양한 영상에 대한 모의실험을 통해 기존의 방법에 비해 뛰어난 성능 개선을 보였다.