• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2000년도 추계 학술대회논문집
• /
• pp.86-91
• /
• 2000

Automatic method for generation of mesh and three dimension natural convection flow result adapted by this method are presented in this paper. It lake long time to meshing com plex 3-D geometries, and It's difficult to clustering grid at surface boundary. Octree structure resolve this difficulty.

• 한국멀티미디어학회논문지
• /
• 제12권6호
• /
• pp.824-832
• /
• 2009

Multi-radio multi-channel Wireless Mesh Network requires an effective management policy to control the assignment of channels to each radio. We concentrated our investigation on modeling method and solution to find a dynamic channel assignment scheme that is adapted to change of network traffic. Multi-path routing scheme was chosen to overwhelm the unreliability of wireless link. For a particular traffic state, our optimization model found a specific traffic distribution over multi-path and a channel assignment scheme that maximizes the overall network throughput. We developed a simple heuristic method for channel assignment by gradually removing clique load to obtain higher throughput. We also presented numerical examples and discussion of our models in comparison with existing research.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2000년도 사면안정 학술발표회
• /
• pp.3-38
• /
• 2000

Slope draperies in soil and rock are a well known method to avoid rockfalls into the roads or onto housings. Common wire mesh or a combination of wire mesh and wire rope nets are pinned to the slope by the means of fully grouted nails or anchors. Most of these installations have not been designed to stabilize the slope, but simply avoid the rocks from bouncing. The combination of soil- or rocknailing with a designable flexible facing system offers the advantage of a longterm stabilization of slopes and can replace other standard methods for slope stabilization. The capability to transfer axial and shear loads from the flexible facing system to the anchor points is most decisive for the design of the stabilization system. But the transfer of forces by mesh as pure surface protection devices is limited on account of their tensile strength and above all also by the possible force transmission to the anchoring points. Strong wire rope nets increase the performance for slope stabilizations with greater distances between nails and anchors and are widely used in Europe. However, they are comparatively expensive in relation to the protected surface. Today, special processes enable the production of diagonally structured mesh from high-tensile steel wire. These mesh provide tensile strengths comparable to wire rope nets. The interaction of mesh and fastening to nail / anchor has been investigated in comprehensive laboratory tests. This also in an effort to find a suitable fastening plates which allows an optimal utilization of the strength of the mesh in tangential (slope-parallel) as well as in vertical direction (perpendicular to the slope). The trials also confirmed that these new mesh, in combination with suitable plates, enable substantial pretensioning of the system. Such pretensioning increases the efficiency of the protection system. This restricts deformations in the surface section of critical slopes which might otherwise cause slides and movements as a result of dilatation. Suitable dimensioning models permit to correctly dimension such systems. The new mesh with the adapted fastening elements have already been installed in first pilot projects in Switzerland and Germany and provide useful information on handling and effects.

• Tribology and Lubricants
• /
• 제37권5호
• /
• pp.189-194
• /
• 2021

A straightforward, yet effective surface modification method of stainless steel mesh and its interesting anti-wetting characteristics are reported in this study. The stainless steel mesh is electrochemically etched, and the specimen has both micro and nano-scale structures on its surface. This process transforms the two types of mesh specimens known as the regular and dense specimens into hydrophobic specimens without applying any hydrophobic chemical coating process. The fundamental wettability of the modified mesh is analyzed through a dedicatedly designed experiment to investigate the waterproof characteristics, for instance, the penetration threshold. The waterproof characteristics are evaluated in a manner that the modified mesh resists as high as approximately 2.7 times the pressure compared with the bare mesh, i.e., the non-modified mesh. The results show that the penetration threshold depends primarily on the advancing contact angles, and the penetration stop behaviors are affected by the contact angle hysteresis on the surfaces. The findings further confirm that the inexpensive waterproof meshes created using the proposed straightforward electrochemical etching process are effective and can be adapted along with appropriate designs for various practical applications, such as underwater devices, passive valves, and transducers. In general, , additional chemical coatings are applied using hydrophobic materials on the surfaces for the applications that require water-repelling capabilities. Although these chemical coatings can often cause aging, the process proposed in this study is not only cost-effective, but also durable implying that it does not lose its waterproof properties over time.

• Asian-Australasian Journal of Animal Sciences
• /
• 제5권4호
• /
• pp.611-615
• /
• 1992

Problems with maintaining service and equipment in some developing countries suggest that the rumen bag technique may be more appropriate for the determination of plant dry matter digestibility. The technique has been adapted for use in goats in the 16-25 kg liveweight range. Reliable results were obtained for animals maintained under shelter in cages and fed on a mixed legume/grass diet. The results showed that up to 7 bags containing dried and ground (2 mm screen) plant samples (1-3 g) could be satisfactorily used in each goat. The digestibility of the legumes studied did not increase with incubation times over 48 hours, but there was an increase in the digestibility of grasses. However an incubation time of 48 hours was adapted for both legumes and grasses as it allowed more efficient work scheduling for large numbers of samples while still giving acceptable comparisons between species. Losses of material from the bags during a 6 hour soaking in water were 2-9% as fine solids and 14-21% in solution. In the method finally adapted the disappearance was measured for plant samples that were placed in Dacron mesh bags ($7{\times}14cm$, 44 micron) and 6 bags suspended in the rumen of each sheep for 48 hours.

• 한국정보통신설비학회:학술대회논문집
• /
• 한국정보통신설비학회 2003년도 하계학술대회
• /
• pp.159-162
• /
• 2003

This paper presents a novel heuristic mechanism, Dynamic-network Adapted Cost selection (DAC-selection), which has higher backup path sharing rate, lower number of blocked channel requests and number of used wavelengths fer reservation of working path and backup path by using unique cost function than that of widely used random selection (R-selection) mechanism and Combined Min-cost selection (CMC-selection) mechanism proposed by Lo, while maintaining 100% restoration capability.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2007년도 추계 학술대회논문집
• /
• pp.243-248
• /
• 2007

A three-dimensional (3D) unstructured hydrodynamic solver for transient two-phase flows has been developed. A two-fluid three-field model was adopted for the two-phase flows. The three fields represent a continuous liquid, an entrained liquid, and a vapour field. The hydrodynamic solver is for the 3D component of a nuclear system code and the component-scale analysis tools for transient two-phase flows. The finite volume method and unstructured grid are adopted, which are useful for the flows in a complicated geometry. The semi-implicit ICE (Implicit Continuous-fluid Eulerian) numerical scheme has been adapted to the unstructured non-staggered grid. This paper presents the numerical method and the preliminary results of the calculations. The results show that the numerical scheme is robust and predicts the phase change and the flow transitions due to boiling and flashing problems well.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1997년도 춘계학술대회논문집
• /
• pp.121-124
• /
• 1997

In the present study, a general tool surface contac search ad check algorithm is proposed. A general tool surface is described by triangular FE mesh. To check a proposed algorithm, clover cup and L-shape cup deep drawing processes are calculated. The elastic-plastic FEM using SEAM (Shear Energy Augmented Membrane) element is adapted for numerical stability.

• Journal of Advanced Research in Ocean Engineering
• /
• 제3권2호
• /
• pp.59-65
• /
• 2017

When an anchor is dropped into the sea, there exists a danger of collision on the pipeline and subsea cables in the seabed. This collision could cause huge environmental disasters and serious economic losses. In order to secure the safety of subsea structures such as pipelines and subsea cables from the external impact, it is necessary to estimate the exact external force through the anchor's terminal velocity on the water. FLUENT, a computational fluid dynamic program, was used to acquire the terminal velocity and drag coefficient computation. A half-symmetry condition was used in order to reduce the computational time and a moving deforming mesh technique also adapted to present hydrostatic pressure. The results were examined with the equation based on Newton's Second Law to check the error rate. In this study, three example cases were calculated by stockless anchors of 5.25 ton, 10.5 ton, and 15.4 ton, and for the onshore experiment dropped height was back calculated with the anchor's terminal velocity in the water.

• 한국항공우주학회지
• /
• 제30권8호
• /
• pp.37-45
• /
• 2002

본 연구에서는 이차원에서 비정상 비점성 유동해석을 위한 비정렬 동적 편자 기법을 개발하였다. 유동해석 기법은 시간에 대해 2차의 정확도를 갖는 내재적인 시간적분법을 사용하였으며, 격자중심의 유한 체적법과 Roe의 풍상차분법을 이용하여 공간에 대한 차분화를 하였다. 시간과 공간에 대한 정확도를 증가시키기 위해서는 해에 따라 원하는 위치에 격자점들을 임의로 추가할 수 있는 비정상 동적 적응격자 기법을 사용하였다. 이를 이용하여 이차원의 2자유도를 갖는 스프링 에어포일 시스템의 와류와의 간섭현상에 따른 공탄성적 변위를 예측하였다.