• Structural Engineering and Mechanics
• /
• v.49 no.4
• /
• pp.509-521
• /
• 2014

In this paper two protocols of Wireless Sensor Networks (WSN) are examined through both a simulation and a case study. The simulation was performed with the optimized network (OPNET) simulator while comparing the performance of the Ad-Hoc on demand Distance Vector (AODV) and the Dynamic Source Routing (DSR) protocols. This is compared and shown with real-world measurement of deflection from eight wireless sensor nodes. The wireless sensor response results were compared with accelerometer sensors for validation purposes. It was found that although the computer simulation suggests the AODV protocol is more accurate, in the case study no distinct difference was found. However, it was shown that AODV is still more beneficial in the field as it has a longer battery life enabling longer surveying times. This is a significant finding as a large factor in determining the use of wireless network sensors as a method of assessing structural response has been their short battery life. Thus if protocols which enhance battery life, such as the AODV protocol, are employed it may be possible in the future to couple wireless networks with solar power extending their monitoring periods.

• Journal of Korea Multimedia Society
• /
• v.12 no.11
• /
• pp.1593-1608
• /
• 2009

If a certain relay node in multi-hop wireless networks might become a malicious node that does not cooperate with other nodes or a selfish node, network throughput will be dramatically decreased. Most of existing ad hoc routing protocols assuming that the nodes will fully cooperate with other nodes do not resolve the problem of network performance degradation due to malicious and selfish nodes. This paper presents the CARE (Cooperative Ad hoc routing protocol based REputation) scheme incorporating the reputation management that can achieve a multi-hop wireless network with high throughput performance. The proposed scheme provides the horizontal cross-layer approach which can identify misbehaving malicious, selfish nodes dropped out of the hop-by-hop based packet processing in the network and then set up an optimal packet routing path that will detour misbehaving nodes. And the vertical cross-layer approach contained in the CARE scheme attempts to improve the quality of routing paths by exploiting the quality of link information received from the MAC layer. Besides, it provides high TCP throughput by exploiting the reputation values of nodes acquired from the network layer into the transport layer. A case study on experiments and simulations shows that the CARE scheme incorporating vertical and horizontal cross-layer approaches yields better performance in terms of the low rate of packet loss, fast average packet delivery time, and high TCP throughput between end-to-end nodes.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.8B
• /
• pp.689-698
• /
• 2008

The performance of a TCP protocol on MANETs has been studied in a numerous researches. One of the significant reasons of TCP performance degradation on MANETs is inability to distinguish between packet losses due to congestion from those caused by nodes mobility and as consequence broken routes. This paper presents the Cluster-Label-based Routing (CLR) protocol that is an attempt to compensate source of TCP problems on MANETs - multi-hop mobile environment. By utilizing Cluster-Label-based mechanism for Backbone, the CLR is able to concentrate on detection and compensation of movement of a destination node. The proposed protocol provides better goodput and delay performance than standardized protocols especially in cases of large network size and/or high mobility rate.

• Journal of Information Processing Systems
• /
• v.7 no.1
• /
• pp.29-42
• /
• 2011

Wireless sensor networks are composed of a large number of sensor nodes with limited energy resources. One critical issue in wireless sensor networks is how to gather sensed information in an energy efficient way, since their energy is limited. The clustering algorithm is a technique used to reduce energy consumption. It can improve the scalability and lifetime of wireless sensor networks. In this paper, we introduce a clustering protocol with mode selection (CPMS) for wireless sensor networks. Our scheme improves the performance of BCDCP (Base Station Controlled Dynamic Clustering Protocol) and BIDRP (Base Station Initiated Dynamic Routing Protocol) routing protocol. In CPMS, the base station constructs clusters and makes the head node with the highest residual energy send data to the base station. Furthermore, we can save the energy of head nodes by using the modes selection method. The simulation results show that CPMS achieves longer lifetime and more data message transmissions than current important clustering protocols in wireless sensor networks.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.47 no.5
• /
• pp.40-52
• /
• 2010

A mobile ad hoc network is instant and heuristic, and it is also vulnerable and volatile. Since topology and route changes are frequent, no single routing protocol designed for a conventional network performs well. Some protocols suffer from significant performance degradation when the number of nodes increases, or when nodes become highly mobile. In this paper we investigate a way to adaptively select a routing protocol that fits to the real-time network conditions. The first phase of our study is to analyze the performances of two classes of routing protocols under various network scenarios. The second phase consists of constructing a routing protocol selection reference. All nodes continue to monitor the status of neighbor nodes and control packets exchanged. Then, the aggregated information is periodically compared against the protocol selection reference. The selected routing protocol is maintained throughout the network until the network property changes substantially. The performance of the proposed algorithm is verified by a set of computer simulations using the OPNET modeler. The experimental results show that selectively changing routing protocol adaptive to the network conditions greatly improves the efficacy of bandwidth utilization.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37 no.2C
• /
• pp.188-195
• /
• 2012

Many systems are developing for the realization of NCW(Network Centric Warfare). UAV(Unmanned Aerial Vehicle) Network is attracting attention in a lot of military applications. In general, UAVs have the potential to create an ad-hoc network and greatly reduce the hops from source to destination. However, UAV networks exhibit unique properties such as high mobility, high data rate, and real time service. The routing protocols are required to design the multi-hop routing protocols that can dynamically adapt to the requirements of UAV network. In this paper we analyse Geographic Routing Protocol is based on geographical distance between source and destination for efficient and reliable transmission. Geographic Routing Protocol is evaluated in video service scenarios with TDMA model in our simulation. The simulation results show that the performance of Geographic Routing Protocol is better than the MANET Routing Protocol in terms of packet received ratio, end to end delay, and routing traffic sent.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.5A
• /
• pp.407-416
• /
• 2005

This paper suggests a new geocasting protocol which is used to transfer the geographic packets to the specific region in MANET. Geocasting protocol is basically different from the conventional multicasting protocol that needs group addition and maintenance. A geocasting protocol using the mobile node's position information is the new area of multicasting protocols. The existing geocasting protocols have the following problems; it may be impossible to transfer data to some mobile hosts even if there are alternate routes and they have low adaptability and efficiency when the number of mobile hosts increases. The proposed CBG (Cluster-Based Geocasting) uses the proactive routing strategy and clustering technique with mobile host's location information. The CBG achieves high successful data transmission ratio and low data delivery cost to mobile hosts at specific region.

• Journal of Communications and Networks
• /
• v.11 no.1
• /
• pp.84-93
• /
• 2009

This paper focuses on message complexity performance analysis of mobile ad hoc network (MANET) address autoconfiguration protocols (AAPs) in reference to link errors generated by mobile wireless nodes. An enhancement was made using a proposed retransmission limit, S, to be computed for error recovery (based on the link error probability), to measure message complexity of AAPs in reference to the link error probability, $P_e$. The control procedures for the retransmission limit have been included for each of the AAPs. Retransmission limit control is critical for efficient energy consumption of MANET nodes operating on limited portable energy. O-notation has been applied to analyze the upper bound of the number of messages generated by a MANET group of nodes. The AAPs investigated in this paper are strong duplicate address detection (DAD), weak DAD with proactive routing protocol (WDP), weak DAD with on-demand routing protocol (WDO), and MANETConf. Each AAP reacts different to link errors, as each AAP has different operational procedures. The required number of broadcasting, unicasting, relaying, and received messages of the nodes participating in a single-node joining procedure is investigated to asymptotically calculate the message complexity of each AAP. Computer simulation was conducted and the results have been analyzed to verify the theoretical message complexity bounds derived. The message complexity of WDP was lowest, closely followed byWDO, based on the simulation results and analysis of the message complexity under nominal situations. The message complexity of MANETConf was higher than WDO, and strong DAD resulted to be most complex among the four AAPs.

• Journal of Information Processing Systems
• /
• v.7 no.2
• /
• pp.221-240
• /
• 2011

Vehicular networks are a promising application of mobile ad hoc networks. In this paper, we introduce an efficient broadcast technique, called CB-S (Cell Broadcast for Streets), for vehicular networks with occlusions such as skyscrapers. In this environment, the road network is fragmented into cells such that nodes in a cell can communicate with any node within a two cell distance. Each mobile node is equipped with a GPS (Global Positioning System) unit and a map of the cells. The cell map has information about the cells including their identifier and the coordinates of the upper-right and lower-left corner of each cell. CB-S has the following desirable property. Broadcast of a message is performed by rebroadcasting the message from every other cell in the terrain. This characteristic allows CB-S to achieve an efficient performance. Our simulation results indicate that messages always reach all nodes in the wireless network. This perfect coverage is achieved with minimal overhead. That is, CB-S uses a low number of nodes to disseminate the data packets as quickly as probabilistically possible. This efficiency gives it the advantage of low delay. To show these benefits, we give simulations results to compare CB-S with four other broadcast techniques. In practice, CB-S can be used for information dissemination, or to reduce the high cost of destination discovery in routing protocols. By also specify the radius of affected zone, CB-S is also more efficient when broadcast to a subset of the nodes is desirable.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.12A
• /
• pp.1226-1237
• /
• 2007

This paper proposes QoS mesh routing protocol for IEEE 802.16 based wireless mesh networks. QoS mesh routing protocol proposed in this paper is a proactive hop-by-hop QoS routing protocol. The goal of our routing protocol is not only to find a route from a source to a destination, but also optimal route that satisfies QoS requirements, given in terms of bandwidth and delay as default QoS parameters. In this paper, we first analyze possible types of routing protocols that have been studied for MANET and show proactive hop-by-hop routing protocols are the most appropriate for wireless mesh networks. Then, we present a network model for IEEE 802.16 based wireless mesh networks and propose a proactive hop-by-hop QoS routing protocol. Through our simulation, we represent that our routing protocol outperforms QOLSR protocol in terms of end-to-end delay, packet delivery ratio and routing overhead.