• 제어로봇시스템학회논문지
• /
• 제22권8호
• /
• pp.633-642
• /
• 2016

It is important for advanced active safety systems and autonomous driving cars to get the accurate estimates of the nearby vehicles in order to increase their safety and performance. This paper proposes a sensor fusion method for radar and vision sensors to accurately estimate the state of the preceding vehicles. In particular, we performed a study on compensating for the lateral state error on automotive radar sensors by using a vision sensor. The proposed method is based on the Interactive Multiple Model(IMM) algorithm, which stochastically integrates the multiple Kalman Filters with the multiple models depending on lateral-compensation mode and radar-single sensor mode. In addition, a Probabilistic Data Association Filter(PDAF) is utilized as a data association method to improve the reliability of the estimates under a cluttered radar environment. A two-step correction method is used in the Kalman filter, which efficiently associates both the radar and vision measurements into single state estimates. Finally, the proposed method is validated through off-line simulations using measurements obtained from a field test in an actual road environment.

• 한국안전학회지
• /
• 제29권3호
• /
• pp.56-63
• /
• 2014

This study proposes a new control approach for efficient vibration suppression of two identical adjacent structures. The conventional control approach of two adjacent structures is to interconnect the two structures with passive, semi-active or active control devices. However, when the two adjacent structures are identical to each other, their dynamical behaviors such as frequency and damping properties are also the same. In this case, the interconnected control devices cannot exhibit the dissipative control forces on the both structures as expected since the relative displacements and velocities of the devices become close to zero. In other words, the interconnection method does not work for the twin structures as enough as expected. In order to solve this problem, we propose several new control approaches to effectively and efficiently reduce the identically-fluctuating responses of the adjacent structures with minimum control efforts. In order to demonstrate the proposed control systems, the proposed several control systems are optimally designed and their control performances are compared with that of the conventional optimal control system where each TMD(tuned mass damper) is installed in each structure for independent control purpose. The simulated results show that one of the proposed control systems(System 04) is able to guarantee enhanced control performance compared with the conventional system.

• 조명전기설비학회논문지
• /
• 제23권6호
• /
• pp.31-39
• /
• 2009

본 논문은 기존의 자동문시스템의 단점을 개선하여 보다 지능적인 기능을 추가함으로써 통행자에게 편의를 제공하고, 전격손실을 낮추는 보다 효율적인 초음파센서 기반의 지능형 자동문 시스템을 제안한다. 기존의 자동문시스템에서는 물체 및 인체 감지 기능 센서로서 원적외선 열선 감지센서와 근적외선 반사식 감지센서를 사용해 왔나. 기존의 방식은 상황에 맞지 않는 문닫힘에 의한 전력손실, 빠르게 다가오는 물체에 대한 적응 부족, 그리고 안전에 대한 문제점이 있었다. 제안된 초음파센서를 이용한 지능형자동문 시스템은 기존의 자동문시스템에 비교하여 필요없는 문닫힘 방지에 의한 전력손실 방지와 빠르게 접근하는 물체에 적응적으로 자동문이 빠르게 열릴 수 있게 하며, 안전도를 높여 기존 방식의 자동문보다 운용적, 경제적, 안정 면에서 성능을 개선하였다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 정기총회 및 추계학술대회 논문집
• /
• pp.2517-2526
• /
• 2011

As technologies are developed and systems are complicated, hazards embedded in the system are also increasing. proving safety and managing the safety is more scientific and organizational domain so that safety management system is pursuing to be active formation detecting the factors of hazard and managing them beyond passive-way. In the future, in order to establish and manage national safety management system, it is important to have effective system and manage it and also more important that all the people related to target system has to change their recognition and to play roles in it.

• 전기학회논문지
• /
• 제65권12호
• /
• pp.2030-2036
• /
• 2016

This paper presents a hardware development procedure of the ASB(Active Seat Belt) control system to comply with ISO 26262. The ASIL(Automotive Safety Integrity Level) of an ASB system is determined through the HARA(Hazard Analysis and Risk Assessment) and the safety mechanism is applied to meet the reqired ASIL. The hardware architecture of the controller consists of a microcontroller, H-bridge circuits, passive components, and current sensors which are used for the input comparison. The required ASIL for the control systems is shown to be satisfied with the safety mechanism by calculation of the SPFM(Single Point Fault Metric) and the LFM(Latent Fault Metric) for the design circuits.

• 한국포장학회지
• /
• 제12권1호
• /
• pp.13-20
• /
• 2006

Active packaging is one of the innovative concepts which actively change the condition of the packaged products. Active packaging technique controls the environment inside the packaging in order to extend the shelf life of the product and improve its quality or safety. Active packaging are based on major contents of scavenging concepts, releasing concepts, and other active packaging concepts such as removal or indicating systems. In recent years, experimental developments using active packaging concepts between polymeric packaging materials and the contact surfaces of food products are widely studied in order to make extensive commercial applications. Well-developed packaging markets in USA, Japan, and Europe are already being successfully applied in active packaging concepts. This paper reviews the concepts of active packaging and current information of active packaging technologies. The status of domestic technologies in active packaging were analyzed.

• 자동차안전학회지
• /
• 제9권3호
• /
• pp.46-52
• /
• 2017

In this study, safety evaluation scenarios on "cut-in" situation are presented to assess the performance of automatic emergency braking systems. The ASSESS project in EU is surveyed for derive efficient test scenarios for cut-in situation. The TASS database are also analyzed to find representative accident scenarios in Korea. With the results of the ASSESS and TASS, the safety evaluation scenarios in cut-in situations are suggested and the scenarios are tested with simulation software PRESCAN.

• 자동차안전학회지
• /
• 제7권1호
• /
• pp.33-39
• /
• 2015

This study examined the drivers' acceptance level of various active safety features with Korean drivers on Seoul urban and city roads. The test vehicle, 2013 Cadillac ATS, was equipped with FCA(Forward Collision Alert), LDW(Lane Departure Warning), SBZA(Side Blind Zone Alert), FRPA(Front/Rear Park Assist), RCTA(Rear Cross Traffic Alert), ACC(Adaptive Cruise Control), and AEB(Autonomous Emergency Braking). Participants had chances to run the tests on those systems in the parking lot accompanied by the 106km long stretch of predetermined route including local road and interurban highway in Seoul and Gyeonggi-do under normal traffic flowing environment. After the test, participants completed a series of questionnaires about the features they experienced. The results revealed that RCTA and SBZA systems received more favourable ratings compared to the other features in avoiding crashes. The respondents preferred sound alerts to haptic ones even though haptic warning methods were better in providing directional information.

• 한국정보전자통신기술학회논문지
• /
• 제4권1호
• /
• pp.23-31
• /
• 2011

본 논문은 차세대 자동차 지능형 통합 스마트 모니터 시스템을 제작하였다. 차량의 계기판 장치는 많은 방해 요소를 감소시키며, 운전자들에게 영향을 주지 않고 도로에 집중할 수 있도록 하는 것이 필수적이다. 위험 경보는 시각적인 디스플레이와 함께 유용하게 사용되지만 기존의 방식은 문제가 있다. 차량 안전 시스템의 최적화는 위험을 알리는 각종 경보보다 더 필수적인 것은 운전자가 도로에 집중할 수 있는 시각적인 장치가 요구된다. 지능형 통합 스마트 모니터 시스템은 자동차에서 가장 많이 보는 정보인 자동차 속도, 엔진 회전속도, 연료, 엔진 온도, 연료 게이지, 회전표시등과 각종 경보 표시등 기본 정보를 모아서 운전자에게 제공한다. 본 논문에서 설계한 지능형 통합 스마트 모니터 시스템은 박막 트랜지스터 액정 표시 장치, 액정 표시 장치배경 조명 발광다이오드, 평면 미러, 특수 제작된 렌즈 및 구동회로로 구성되어 있으며, 운전자 안전성을 고려한 차세대 지능형 자동차 통합스마트 모니터 시스템을 제작, 분석하였다.

• 한국정밀공학회지
• /
• 제20권7호
• /
• pp.128-137
• /
• 2003

Continuously variable damper can yield diverse damping forces for a single damping velocity. It is widely used in the semi-active suspension system since, with right control logics, it can enhance ride comfort compared to the passive damper while not degrading driving safety. A key to the successful design of the continuously variable damper is the knowledge of its complex and nonlinear characteristics. In this paper, research has been done for analyzing characteristics of the continuously variable damper. Various damper components have been investigated and their effects upon the force-velocity characteristics of the damper have been examined. The effects of the damper characteristics change upon ride comfort and driving safety have also been investigated by numerical simulations.