• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.5 no.1
• /
• pp.105-122
• /
• 2011

The fundamental design goal of wireless sensor MAC protocols is to minimize unnecessary power consumption of the sensor nodes, because of its stringent resource constraints and ultra-power limitation. In existing MAC protocols in wireless sensor networks (WSNs), duty cycling, in which each node periodically cycles between the active and sleep states, has been introduced to reduce unnecessary energy consumption. Existing MAC schemes, however, use a fixed duty cycling regardless of multi-hop communication and traffic fluctuations. On the other hand, there is a tradeoff between energy efficiency and delay caused by duty cycling mechanism in multi-hop communication and existing MAC approaches only tend to improve energy efficiency with sacrificing data delivery delay. In this paper, we propose two different MAC schemes (ADS-MAC and ELA-MAC) using closed-loop control in order to achieve both energy savings and minimal delay in wireless sensor networks. The two proposed MAC schemes, which are synchronous and asynchronous approaches, respectively, utilize an adaptive timer and a successive preload frame with closed-loop control for adaptive duty cycling. As a result, the analysis and the simulation results show that our schemes outperform existing schemes in terms of energy efficiency and delivery delay.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2009.05a
• /
• pp.306-309
• /
• 2009

MANET(Mobile Ad-hoc Network)은 기간망에 의존하지 않는 이동 노드들로 구성된 자율망 또는 추론망 토폴로지에 의한 멀티홉 무선 네트워크이다. MANET을 구성하는 각 노드의 이동성, 속도 그리고 에너지와 같은 다양한 속성정보는 망의 특징과 운영을 결정하는 요인이다. 특히 망의 운영상, 전송 대역폭과 에너지 사용에 따른 제약을 가지며 이러한 특징을 고려한 라우팅 프로토콜의 설계 및 하드웨어 개발이 중요하게 요구된다. 본 논문에서는 계층적 클러스터 구조의 MANET 환경에서 노드의 에너지 속성과 네트워크의 트래픽 상태를 고려한 적응적 시간차 노드관리 기법인 ATICC(Adaptive Time Interval Clustering Control)을 제안한다. 제안된 ATICC은 시간차 노드 관리기법인 TICC(Time Interval Clustering Control)[1]에 기반하며 노드에 최적화된 Active/Sleep, Idle Listening 상태를 적응적으로 설정한 후 패킷을 전송함으로서 계층적 클러스터 내의 각 노드의 균형적인 에너지 소모를 이루는 에너지 효율적인 방식이다. 제안한 노드관리 방법은 기존의 LEACH, TICC과 비교 실험하고 그 성능을 검증하였다. 실험 결과, 제안한 노드관리 방법이 노드별 에너지 소모량을 줄였으며 전체 네트워크의 생존시간을 연장함으로서 기존의 방법 보다 우수함을 확인하였다.

• Journal of the Architectural Institute of Korea Planning & Design
• /
• v.35 no.12
• /
• pp.105-114
• /
• 2019

The goal of this study is to quantitatively evaluate the effects of the additional construction of urban railroads. To this end, 1) establish accessibility as a measure of quantitative evaluation of construction effects; 2) select the 'Integration' of Space Syntax as a quantifiable indicator of accessibility; 3) represent the Seoul railroads as a network; 4) calculate the 'Integration' form the network before and after the additional construction of the urban railroads. By calculating the change of the 'Integration' of the individual nodes and the change of the sum of the 'Integration' of given zones, the change in accessibility of a particular node and the change in accessibility of a particular region were calculated. After analyzing the change in accessibility in nodes and areas as well, it was confirmed that the additional construction of urban railroads was improving accessibility as a whole of Seoul. It was also identified that there was a degree of difference in the extent of the accessibility change for the different areas. It is particularly noteworthy that changes occur in the accessibility ranking. While certain regions were improving relative rankings, others fell in rank. With this finding, it could be argued that active consideration of the areas in which the relative decline occurs is needed when the planned urban railroad is being built.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.17 no.8
• /
• pp.2209-2221
• /
• 2023

As the supply of electric vehicles increases, research on wireless charging methods for convenience has been increasing. Because the electric vehicle wireless transmission device is installed on the ground and the electric vehicle battery is installed on the floor of the vehicle, the transmission and reception antennas are approximately 15-30 cm away, and thus strong magnetic fields are exposed during wireless charging. When a metallic foreign object is placed in the magnetic field area, an eddy current is induced to the metallic foreign object, and heat is generated, creating danger of fire and burns. Therefore, this study proposes a method to detect metallic foreign objects in the magnetic field area of a wireless electric vehicle charging system. An active detection-only coil array was used, and an LC resonance circuit was constructed for the frequency of the supply power signal. When a metallic foreign object is inserted into the charging zone, the characteristics of the resonance circuit are broken, and the magnitude and phase of the voltage signal at both ends of the capacitor are changed. It was confirmed that the proposed method has about 1.5 times more change than the method of comparing the voltage magnitude at one node.

• Smart Structures and Systems
• /
• v.32 no.1
• /
• pp.61-81
• /
• 2023

This study presents an ensemble learning based Bayesian model updating approach for structural damage diagnosis. In the developed framework, the structure is initially decomposed into a set of substructures. The autoregressive moving average (ARMAX) model is established first for structural damage localization based structural motion equation. The wavelet packet decomposition is utilized to extract the damage-sensitive node energy in different frequency bands for constructing structural surrogate models. Four methods, including Kriging predictor (KRG), radial basis function neural network (RBFNN), support vector regression (SVR), and multivariate adaptive regression splines (MARS), are selected as candidate structural surrogate models. These models are then resampled by bootstrapping and combined to obtain an ensemble model by probabilistic ensemble. Meanwhile, the maximum entropy principal is adopted to search for new design points for sample space updating, yielding a more robust ensemble model. Through the iterations, a framework of surrogate ensemble learning based model updating with high model construction efficiency and accuracy is proposed. The specificities of the method are discussed and investigated in a case study.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.6 no.7
• /
• pp.993-1000
• /
• 2002

In this paper, we design the CORBA-based Mobile Agent Model (CMAM) which has the capability of the efficient work processing in distributed environment through sensing network traffic and searching the optimal path for migration nodes of mobile agent. In case existing mobile agent model is given various works from user, the network overhead and traffic are increased by increasing of execution module size. Also, if it happens a large quantity of traffics due to migration of nodes according to appointment of the passive host(below node) routing schedule by user, it needs much cost for node search time by traffic. Therefore, in this paper, we design a new mobile agent m()del that assures the reliability of agent's migration through dynamic act on the specific situation according to appointment of the active routing schedule and can minimize agent's work processing time through optimal path search. The proposed model assigns routing schedule of the migration nodes actively using an extended MAFFinder. Also, for decreasing overhead of network by agent's size, it separates the existing mobile agent object by mobile agent including only agent calling module and push agent with work executing module based on distributed object type of CORBA. Also, it reduces the required time for round works of mobile agent through the optimal path search of migration nodes.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.44 no.10
• /
• pp.37-46
• /
• 2007

In wireless sensor networks, one of the most important goals of designing protocols is to extend the network lifetime. A node has lots of duplication in sensing and communication range with surrounding nodes after many of nodes are randomly scattered. Such a heavy duplication overhead affects on the network lifetime seriously so usually all nodes need not activated constantly to carry out sensing and communication operation. One of the optimal methods of prolonging the network lifetime is finding the number of surrounding nodes necessary to maintain the network coverage and connectivity. It has been studied till the current date in wireless networks. If the neighbor necessary can be acquired to satisfy the probability using the ideal number of neighbors necessary and the acquired number of neighbors m to guarantee network coverage and connectivity. We use the result that F. Xue et al and S. Song et al derive previously in finding the neighbor necessary to guarantee the network connectivity and cany out the computer simulation to verify the necessary number. We present that our scheme satisfy the network coverage and connectivity. We present the simulation results compared with constant probability scheme through computer simulation.

• Journal of Bio-Environment Control
• /
• v.10 no.3
• /
• pp.181-186
• /
• 2001

During the growth of fruit vegetables such as pepper, cucumber and tomato, there are light deficiency under the plant canopy. This study was conducted to clarify the effect of light diffusion film on the stem growth, canopy, flowering and fruiting of green pepper in greenhouse. The transmittance of total solar radiation into greenhouse under woven and double films were 90% and 75% of polyethylene film. And the transmittance of photosynthetically active radiation into greenhouse under woven and double films were 96% and 81% of polyethylene film. However, the light diffusions under woven, double and polyethylene films were 46%, 31% and 9%, respectively. The plant height under polyethylene film covered greenhouse was 96.9% cm, taller than those under woven and double films by 6.5, 13.9 cm. And the third node length under woven film covered greenhouse was 8.6 cm, shorter than those under double and polyethylene films by 2.5, 5.7 cm. Also the first branch angle under woven film covered greenhouse was 61.0$^{\circ}$, larger than those under double and polyethylene films by 2.3, 10.3$^{\circ}$. But there was no clear difference in the node numbers among the covering materials. The rate of curved and sterile fruit under woven film covered greenhouse was smaller than those under double and polyethylene films by 4.6, 5.5% and 1.2, 3.6%. But the contents of vitamin C showed no difference among the covering materials and plant densities.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.16 no.3
• /
• pp.60-66
• /
• 2012

This paper aims to constitute a feedback vibration control system using wireless sensor networks and experiment it on a model structure to verify its effectiveness. For the purpose, we set up a feedback vibration control system composed of a wireless input/output(I/O) sensor node based on bluetooth, a home-made shear type MR damper, a shaker which generates a constant size of sine wave, and a simple beam model structure. The vibration control experiment was performed by shaking the 1/4 point of beam with a shaker. At the moment of shaking, we controled the vibration with MR damper which was placed vertically on the center of beam. Simultaneously, by acquiring acceleration response at the 2/4 point of beam, we evaluated the effectiveness of control capability. The control command was set to send a voltage signal to MR damper when the acceleration response, acquired from the wireless I/O sensor node placed at the center of beam, was more than a certain amount. Although the realtime feedback vibration control system constituted in this paper is effective only within a limited command system, it has been proven that the system was able to effectively decrease the vibration of structure by generating a control command aimed for realtime purpose. The system also showed a possibility to be used as a structural response control system adapting a variety of semi-active control algorithm.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2002.11a
• /
• pp.550-554
• /
• 2002

In this paper, we design the CORBA-based Mobile-Agent Model (CMAM) which has the capability of the efficient work processing in distributed environment through sensing network traffic and searching the optimal path for migration nodes of mobile agent. In case existing mobile agent model is given various works from user, the network overhead and traffic are increased by increasing of execution module size. Also, if it happens a large quantity of traffics due to migration of nodes according to appointment of the passive host(node) muting schedule by user, it needs much cost for node search time by traffic. Therefore, in this paper, we design a new mobile agent model that assures the reliability of agent's migration through dynamic act on the specific situation according to appointment of the active routing schedule and can minimize agent's work processing time through optimal path search. The proposed model assigns routing schedule of the migration nodes actively using an extended MAFFinder. Also, for decreasing overhead of network by agent's size, it separated by mobile agent including oかy agent calling module and push agent with work executing module based on distributed object type of CORBA. Also, it can reduce the required time for round works of mobile agent through the optimal path search of migration nodes.