• 제목/요약/키워드: Active mixer

검색결과 69건 처리시간 0.026초

Phase Conjugator for Retrodirective Array Antenna Applications (능동 역지향성 배열 안테나용 공액 위상변위기)

  • Chun Joong-Chang;Jeung Deuk-Soo;Lee Byung-Rho;Tack Han-Ho
    • The Journal of Korean Institute of Electromagnetic Engineering and Science
    • /
    • 제16권2호
    • /
    • pp.134-138
    • /
    • 2005
  • In this paper, we have developed a new type of the microwave phase conjugator for the active retrodirective antenna array. The circuit topology is consisted of a 2-port structure to avoid the complexity of LO and RF signal combination and matching, using the cascade connection of two single-ended mixers. The operating frequencies are 4.0 GHz, 2.01 GHz and 1.99 GHz for LO, RF, and IF, respectively. Conversion loss is measured to be -7 dB and 1-dB compression point 15 dBm with the LO power of 9 dBm. For the most important parameter, the isolation between RE leakage and IF signal is as high as 25 dB.

Design and Fabrication of a GaAs MESFET MMIC Transmitter for 2.4 GHz Wireless Local Loop Handset (2.4 GHz WLL 단말기용 GaAs MESFET MMIC 송신기 설계 및 제작)

  • 성진봉;홍성용;김민건;김해천;임종원;이재진
    • The Journal of Korean Institute of Electromagnetic Engineering and Science
    • /
    • 제11권1호
    • /
    • pp.84-92
    • /
    • 2000
  • A GaAs MESFET MMIC transmitter for 2.4 GHz wireless local loop handset is designed and fabricated. The transmitter consists of a double balanced active mixer and a two stage driver amplifier with voltage negative feedback. In particular, a pair of CS-CG(common source-common gate) structure compensates the reduction in dynamic range caused by unbalanced complementary IF input signals. And to suppress the leakage local power at RF port, the mixer is designed by using phase characteristic between the ports of MESFET. At the bias condition of 2.7 V and 55.2 mA, the fabricated MMIC transmitter with chip dimensions of $0.75\times1.75 mm^2$ obtains a measured conversion gain of 38.6 dB, output $P_{idB}$ of 11.6 dBm, and IMD3 at -5 dBm RF output power of -31.3 dBc. This transmitter is well suited for WLL handset.

  • PDF

Combustion Characterisitics of a Catalytic Combustorfor an Automotive Ceramic Gas Turbine (세라믹 가스 터빈용 촉매연소기의 연소특성)

  • Kim, Young-Il
    • Journal of the Korean Society of Industry Convergence
    • /
    • 제1권2호
    • /
    • pp.49-54
    • /
    • 1998
  • In the catalytic combustor, combustion characteristic and deterioration of catalysts were affected by non-uniformity of pre-mixed gas, Therefore, formation of uniform pre-mixed gas is one of important subjects. In this study, the effect of uniformity and non-uniformity of pre-mixed gas supplied to the catalyst was examined to clarify reaction acceleration and combustion characteristic of the catalytic combustion. It was clarified that static mixer or vaporizer tube length of about 150mm and weak swirl to a combustion air were effictive expedient to make uniform pre-mixed gas. And catalystic inlet temperature needs more than $600^{\circ}C$ with rich pre-mixed gas to active reaction.

  • PDF

Numerical Study for Mixing Characteristics of an Oscillating Micro-stirrer (미소진동교반기의 혼합특성에 대한 수치적 연구)

  • Kim, Yong-Dae;Maeng, Joo-Sung
    • 유체기계공업학회:학술대회논문집
    • /
    • 유체기계공업학회 2006년 제4회 한국유체공학학술대회 논문집
    • /
    • pp.309-312
    • /
    • 2006
  • Effective mixing is an important problem in microfluidics for chemical and biomechanical applications. In this study, the influences of the Reynolds number and the oscillating frequency on mixing characteristics of micro-stirrer are studied in a microchannel with single stirrer. The influence of fluid inertial effects in an active mixer is first discussed. It is found that the stirring effects by stirrer oscillation are promptly attenuated at low Reynolds number, which makes greatly difficult the rapid mixing. As the inertial effects are increased, the chaotic advection is generated and then developed. The mixing phase is finally developed some mushroom shaped structure. And the mixing efficiency is also studied as a function of the oscillating frequency. We found that the mixing efficiency does not always increase with higher oscillating frequency of stirrer. Consequently, we found the functional relation between the optimal frequency of a stirrer and the Reynolds number.

  • PDF

Design of a SiGe HBT MMIC Double Balaned Up-converter for WLAN Applications (C-BAND WLAN용 SiGe HBT MMIC 이중평형형 상향주파수 혼합기)

  • 서정욱;정병희;오영수;채규성;김창우
    • Proceedings of the IEEK Conference
    • /
    • 대한전자공학회 2003년도 하계종합학술대회 논문집 I
    • /
    • pp.346-349
    • /
    • 2003
  • A SiGe HBT MMIC double balaced up-converter has been designed and fabricated for C-band WLAN applications. The up-converter is based on the Gilbert cell mixer with an active baluns for differential inputs of LO and IF signals. The designed up-converter exhibits a conversion gain 12.5dB for a -10 dBm LO power. It also exhibits LO-RF isolation of 19.3dBc, and IF-RF isolation of 23.3 dBc at a 1-dB compression point of -14.2dBm

  • PDF

Graphene field-effect transistor for radio-frequency applications : review

  • Moon, Jeong-Sun
    • Carbon letters
    • /
    • 제13권1호
    • /
    • pp.17-22
    • /
    • 2012
  • Currently, graphene is a topic of very active research in fields from science to potential applications. For various radio-frequency (RF) circuit applications including low-noise amplifiers, the unique ambipolar nature of graphene field-effect transistors can be utilized for high-performance frequency multipliers, mixers and high-speed radiometers. Potential integration of graphene on Silicon substrates with complementary metal-oxide-semiconductor compatibility would also benefit future RF systems. The future success of the RF circuit applications depends on vertical and lateral scaling of graphene metal-oxide-semiconductor field-effect transistors to minimize parasitics and improve gate modulation efficiency in the channel. In this paper, we highlight recent progress in graphene materials, devices, and circuits for RF applications. For passive RF applications, we show its transparent electromagnetic shielding in Ku-band and transparent antenna, where its success depends on quality of materials. We also attempt to discuss future applications and challenges of graphene.

Cross-sectional radiation type micromixer to mixed interface using PZT (PZT를 이용한 계면 교차 방향 방사형 마이크로믹서)

  • Heo, Pil-Woo;Kim, Deok-Jong;Kim, Jae-Yun;Park, Sang-Jin;Yun, Eui-Soo;Koh, Kwang-Sik
    • 유체기계공업학회:학술대회논문집
    • /
    • 유체기계공업학회 2003년도 유체기계 연구개발 발표회 논문집
    • /
    • pp.121-125
    • /
    • 2003
  • Micromixer plays an important role in Bio-MEMS or ${\mu}-TAS$. Mixing is generally generated by turbulence and interdiffusion of two fluids. Because of low Reynolds number(Re << 2000) in ${\mu}-channel$, it is difficult to generate turbulence, so mixing mainly depends on interdiffusion. Thus long channel distance is required to mix two different fluids. To reduce the channel length required for mixing, we propose the a new active ${\mu}-mixer$ that two fluids are effectively mixed in ${\mu}-channel$ by the ultrasonic wave which is generated by PZT. The ultrasonic wave is radiated into a chamber in the cross-section directional direction to interface with the two fluids. The two fluids are positioned one on top of the other. Mixing state is measured by the changing of color due to the reaction of NaOH and phenolphtalein.

  • PDF

Analysis and Design of Ultrasonic Micromixer (초음파 미세혼합기의 해석 및 설계)

  • Kim, Duck-Jong;Heo, Pil-Woo;Park, Sang-Jin;Kim, Jae-Yun;Yoon, Eui-Soo
    • 유체기계공업학회:학술대회논문집
    • /
    • 유체기계공업학회 2003년도 유체기계 연구개발 발표회 논문집
    • /
    • pp.101-106
    • /
    • 2003
  • In this work, mixing phenomena in the mixing chamber of a ultrasonic micromixer are analyzed through an analytical approach. A simplified 2-dimensional model for the ultrasonic micromixer is presented. Analytical solutions for fluid flow induced by ultrasonic waves are obtained through successive approximations method. From simulation results on thermal diffusion in the mixing chamber, effects of relative location, size, and vibration frequency of a piezoelectric material and aspect ratio of the mixing chamber on mixing performance of the ultrasonic micromixer are investigated. Finally, design guidelines for the ultrasonic micromixer are suggested based on the parametric study.

  • PDF

The Effect of Karman Vortex for Mixing in a Micro-channel with an Oscillating Micro-stirrer (진동 교반기가 있는 미소채널에서 혼합에 대한 Karman 와의 영향)

  • An, Sang-Joon;Maeng, Joo-Sung;Kim, Yong-Dae
    • Transactions of the Korean Society of Mechanical Engineers B
    • /
    • 제30권2호
    • /
    • pp.144-152
    • /
    • 2006
  • In order to consider the effect of Karman vortex for mixing, mixing indices are calculated for 4 models of micro channel flows driven from the combinations of a circular cylinder and a oscillating stirrer. And their results are compared to that of a simple straight micro channel flow(model I). The mixing rate is improved 5.5 times by Karman vortex (model II) and 11.0 times by the stirrer(model III) respectively. In case of successive mixing by the cylinder and the stirrer(model IV), $27\%$ of shortening the channel length for the complete mixing as well as 1.37 times improvement of mixing efficiency then model III. And then, variation of mixing indices are much stable comparing with the others. Thus, it is found that the Karman vortex plays a good role as a pre-mixing method. The D2Q9 Lattice Boltzmann methods are used.

Fabrication of RFID Reader RF Transceiver for 900 MHz Bandwidth (900 MHz 대역 RFID 리더용 RF 트랜시버 설계 및 제작)

  • Kim Bo-Joon;Kim Chang-Woo;Kim Nam Yoon;Kim Young-Gi
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • 제31권1A호
    • /
    • pp.58-64
    • /
    • 2006
  • A 900-MHz band transceiver has been developed for RFID reader applications. In the transmitter, a GaAs SPST switch is used for high speed switching and low power consumption. In the receiver, a double balanced mixer is used to compress even-harmonic products. The ASK demodulator which consists of an active filter and comparator is used to reject the unwanted in band interferers. The transceiver produces a maximum transmitting power of 30 dBm and exhibits an 5 m communication range with a 6-dBi gain antenna.