• KIEAE Journal
• /
• v.16 no.3
• /
• pp.57-62
• /
• 2016

Purpose: A lot of active researches have addressed the impact of a building on global environment, but most of the researches focus on a residential building and a large office building. Hereupon, this study assessed the impact on environment quantitatively through the analysis of input materials targeting a school building. Method:This study calculated embodied energy of input materials suggested in a construction statement on a school building using the input-output analysis. This study finally carried out environmental impact assessment by applying LCIA DB shown in the preceding researches to the calculated embodied energy. Result: The analysis result revealed that the environmental impact per unit area(/$m^2$) at a school building was $4.11E-02PE{\cdot}yr$, among which Construction was found to be $3.59E-02PE{\cdot}yr$, being analyzed to account for about 87% of the total environmental impact. Also, as a result of detailed environmental impact, the impact on global warming among the total environmental impact was analyzed to be high, accounting for about 76%.

• Journal of Electrochemical Science and Technology
• /
• v.11 no.4
• /
• pp.346-351
• /
• 2020

The removal characteristics of copper (Cu) from electrochemical surface by voltage-activated reaction were reviewed to assess the applicability of electrochemical-mechanical polishing (ECMP) process in three types of electrolytes, such as HNO₃, KNO₃ and NaNO₃. Electrochemical surface conditions such as active, passive, transient and trans-passive states were monitored from its current-voltage (I-V) characteristic curves obtained by linear sweep voltammetry (LSV) method. In addition, the oxidation and reduction process of the Cu surface by repetitive input of positive and negative voltages were evaluated from the I-V curve obtained using the cyclic voltammetry (CV) method. Finally, the X-ray diffraction (XRD) patterns and energy dispersive spectroscopy (EDS) analyses were used to observe the structural surface states of a Cu electrode. The electrochemical analyses proposed in this study will help to accurately control the material removal rate (MRR) from the actual ECMP process because they are a good methodology for predicting optimal electrochemical process parameters such as current density, operating voltage, and operating time before performing the ECMP process.

• The Journal of Internal Korean Medicine
• /
• v.13 no.1
• /
• pp.167-180
• /
• 1992

This study has been carried out to investigate the cause and originative mechanism of vertigo by referring to 46 literatures. The results were as follows; 1. The 1st factors causing vertigo are exuberance of fire in the Liver (肝火偏亢). and ascending of Yang of Wind (風陽升動) resulting from thought excess (思慮太過) and melancholy (憂鬱). 2. The 2nd factors causing vertigo is a malnurtrient of the brain resulting from dispersion of the Liver function (肝血虛) and failure in ascending of the Clear Yang (淸陽不升) due to hemorrhage and so on. 3. The 3rd factors causing vertigo are failure in ascending to the Brain and deficiency of blood of the Liver (肝血虛) resulting from the injury of the essence of the Kidney (肝精虧損). 4. The 4th factors causing vertigo is a ascending of exogenous pathogenic factors (外邪) to the Brain on deficiency state. 5. The 1st factors causing vertigo are Stagnatum of clear Yang (淸陽不振) and pershing of Yang (亡陽) resulting from loss of water and damage of active thin body fluid (津氣虧損). 6. The obesity is beonged to excessiveness Symptom-Complex (實證) and the thin to deficiency Symptom-complex (虛證). 7. The vertigo is connective with the Live (肝), Spleen (脾) and the Kidney (腎), but among those, most intimative viscera is the Liver (肝).

• Proceedings of the SAREK Conference
• /
• 2009.06a
• /
• pp.284-292
• /
• 2009

The stack-effect in high-rise buildings in winter causes many problems such as difficulties in opening or closing doors, infiltration, energy loss, noise and fire protection. Stack effect is influenced by temperature difference between the interior and exterior of building and the height of building. As an attenuation method for stack effect, the architectural methods are generally used. However, as though architectural methods were fully adopted, the problems are reported as ever in tall building. In this study, a new method to reduce stack effect will be suggested. As an active control method against the stack effect, E/V shaft natural cooling method is suggested. In this paper, the concept of E/V shaft natural cooling system and its reduction performance of stack effect by simulation and field measurement will be reported.

• Journal of architectural history
• /
• v.22 no.5
• /
• pp.7-22
• /
• 2013

Gimlyong-sa temple has played an important role of Buddhist culture in Gyeongsangdo Provinces(嶺南地域) in the late Joseon Dynasty as the 31st head temple(本山) in the Japanese occupation. There are lots of architectural documentary records remained nevertheless, most of cultural heritages are destroyed by fire in 1997. There were 85 articles in five kinds of books which contained historical achievements of Gimlyong-sa temple and hermitages(Daeseongam(大成庵), Hwajangam(華藏庵), Yangjinam(養眞庵), Geum seondae(金仙臺), Dosoram(兜率庵), Myeongjeogam(明寂庵)). It is possible to understand the five situational peculiarities in the 17~19th century. At the first, they were compiled in 1914 to around 1930 by Kwon Sangro(權相老) to clarify the historical facts. Second, confirmed the formation process of the foundation narrative. Third, the meaning of Seolseondang(設禪堂), Manseru(萬歲樓) and Hyangnojeon(香爐殿) were recorded, it is possible to look at the concept of people at that time. Fourth, the great masters portraits were enshrined in hermitages, not in Gimlyong-sa temple. It means that a hermitage is not for only self-discipline or living but assembly of religious orders(門派). Fifth, Chimgye(枕溪), the great Buddhist clergy and carpenter of Gimlyong-sa, was nationwide active worker in 19th century because he was also in a charge of investment manager for construction.

• Transactions of the Korean hydrogen and new energy society
• /
• v.27 no.5
• /
• pp.494-502
• /
• 2016

A 1-dimensional heterogeneous reactor model with the gas-solid interfacial phase gradients was developed for the simulation of the packed bed reactor where the exothermic reversible water gas shift reaction for the natural gas steam reformed gas was proceeding in adiabatic mode. Experimental results obtained over the WGS catalyst, C18-HA, were best simulated when the frequency factor of the reaction rate constant was adjusted to a half the value reported over another WGS catalyst, EX-2248, having the same kinds of active components as the C18-HA. For the reactor of the inside diameter 158.4 mm and the bed length 650 mm, the optimum feeding temperature of the reformed gas was simulated to be $194^{\circ}C$, giving the lowest CO content in the product gas by 1.68 mol% on the basis of dried gas. For reactors more extended in the bed length, the possible lowest CO content in the product gas with the optimum feeding temperature of the reformed gas were suggested.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.14 no.3
• /
• pp.579-586
• /
• 2019

The purpose of this study is to determine the rapid saving of life through the drones when natural disasters such as earthquake and fire occur. Drones are equipped with riders, temperature, hazardous gas sensors and wireless cameras are registered with the application server for monitoring the disaster site and real-time monitoring functions are performed to identify the situation on site before rescuing personnel are active. When monitoring finds a person to save, the application server provides real-time image information for effective life-saving.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.23 no.4
• /
• pp.211-219
• /
• 2019

In this study, SMG(Smart Material with Grease) was developed, which was improved the precipitation minute particle in grease during long term standstill. Also, small-sized cylinder damper equipped with an electromagnet in a piston was developed for using a performance evaluation of the damper with SMG and the dynamic load test, and damping force using Power model and Bingham model was derived in order to compare to the result of that of the damper. The data obtained from the dynamic load test were analyzed and plotted, and then a dynamic range was calculated to evaluate the usability of the damper with SMG. The performance of the damper with SMG was compared to the damping forse derived from the Power and Bingham model. The result of this evaluation shown that the usability of SMG damper was demonstrated by this test as a semi-active controlling equipment of small-sized damper.

• The Korean Journal of Emergency Medical Services
• /
• v.25 no.1
• /
• pp.57-72
• /
• 2021

Purpose: The purpose of this study was to provide basic data for developing strategic programs based on the types of perception to aid in the coping strategy of 119 emergency medical technicians who experienced have violence. Methods: The subjects were 119 emergency medical technicians working out of hospitals in Korea. Data were collected from March 10, 2019, to June 30, 2019. Q samples of 37 statements and P samples of 36 persons were taken using PC QUANL software. Results: As a result of the study, four types of coping with violence experiences were identified; these four types explained 53.79% of all variables from the examination. The types were labeled as the cooperation seeking and manual emphasis type, emotional suppression and stability seeking type, active response and business continuation type, communication empathy and recovery effort type. Conclusion: The Fire Department requires institutional measures to lower violence during field activities, and it will be necessary to develop a policy according to the type of perception of coping behaviors.

• The Korean Journal of Emergency Medical Services
• /
• v.25 no.3
• /
• pp.163-178
• /
• 2021

Purpose: This study explored a plan for improving the overall preventive activity of Korean Citizen-Corps-Active-in-Disaster (CAIND). Methods: The study used the documentary survey and the technical approach methods. This way, detailed information regarding civil anti-disaster organizations was found in scholarly monographs, specialty publications, and master's/doctoral dissertations. It further utilized the statistical yearbooks between 2015 and 2018 from the Korean Ministry of Public Administration, Security, and Fire Service, and the National Statistical Office, to discover practical problems through a statistical analysis. Volunteer activities being inherent, related issues were reviewed at the same time to for purposes of clarifying the characteristics of disaster prevention activity by CAIND. Results: The study provided four major suggestions for improvement. First, the quota management system of Korean CAIND considering the characteristics of rural areas should be supplemented. Second, the education and training systems of Korean CAIND should be established to satisfy regional conditions. Third, management members' readership competency in operating organizations, including that of the Korean CAIND captain in charge, should be strengthened. Fourth, the reward system for Korean CAIND activities should be improved. Conclusion: In the future, the results of this study are expected to be utilized as a basic data to develop Korean CAIND.