• Journal of the Korean Wood Science and Technology
• /
• 제48권4호
• /
• pp.503-512
• /
• 2020

Using Na₂CO₃ versus NaCl as chemical activator, we compared the quality of activated carbon produced from oil palm fronds as raw material. These activators were selected for comparison because both are readily available and are environmentally friendly. In the manufacturing, we used Indonesian National Standard (SNI 06-3730-1995) parameters. For the quality comparison, we determined activated-carbon yield, moisture, ash, volatiles, and fixed-carbon contents; and adsorption capacity of iodine. The best characteristics, assessed by morphological surface analysis and Fourier transform infrared (FTIR) spectral analysis, were observed in the carbon activated by Na₂CO₃ at an activator concentration of 10% and carbonization temperature of 400 ℃. The results were as follows: activated-carbon yield, 84%; water content, 8.80%; ash content, 2.20%; volatiles content, 14.80%; fixed-carbon content, 68.60%; and adsorption capacity of iodine, 888.51 mg/g. Identification using the FTIR spectrophotometer showed the presence of the functional groups O-H, C=O, C=C, C-C, and C-H in the Na₂CO₃-activated carbon.

• Applied Microscopy
• /
• 제43권4호
• /
• pp.155-163
• /
• 2013

Meta-kaolin (MK) and blast furnace slag (BS) were used as raw materials with NaOH and sodium silicate as alkali activators for making geo-polymers. The compressive strength with respect to the various pre-curing conditions was investigated. In order to improve the recycling rate of BS while still obtaining high compressive strength of the geo-polymers, it was necessary to provide additional CaO to the MK by adding BS. The specimens containing greater amounts of BS can be applied to fields that require high initial compressive strength. Alkali activator(s) are inevitably required to make geo-polymers useful. High temperature pre-curing plays an important role in improving compressive strength in geo-polymers at the early stage of curing. On the other hand, long-term curing produced little to no positive effects and may have even worsened the compressive strength of the geo-polymers because of micro-structural defects through volume expansion by high temperature pre-curing. Therefore, a pre-curing process at a medium range temperature of $50^{\circ}C$ is recommended because a continuous increase in compressive strength during the entire curing period as well as good compressive strength at the early stages can be obtained.

• 한국발생생물학회지:발생과생식
• /
• 제16권1호
• /
• pp.69-75
• /
• 2012

Hatching occurred in the time dependent manners and strictly controlled. Although, the hatching processes are under the control of muti-embryotrophic factors and the expressed G proteins of cell generate integrated activation, the knowledge which GPCRs are expressed during hatching stage embryos are very limited. In the present study, which G proteins are involved was examined during blastocyst development to the hatching stage. The early-, expanded-, and lobe-stage blastocysts were treated with various $G_{\alpha}$ activators and H series inhibitors, and examined developmental patterns. Pertusis toxin (PTX) improved the hatching rate of the early-stage blastocyst and lobe-formed embryos. Cholera toxin (CTX) suppressed the hatching of the early-stage blastocyst and expanded embryos. The effects of toxins on hatching and embryo development were changed by the H7 and H8. These results mean that PTX mediated GPCRs activation is signaling generator in the nick or pore formation in the ZP. In addition, PTX mediated GPCR activation induces the locomotion of trophectoderm for the escaping. CTX mediate GPCRs activation is the cause of suppression of hatching processes. Based on these data, it is suggested that various GPCRs are expressed in the periimplantation stage embryos and the integration of the multiple signals decoding of various signals in a spatial and temporal manner regulate the hatching process.

• 대한약리학회지
• /
• 제32권2호
• /
• pp.211-219
• /
• 1996

The inhibitory effect of cyclosporin A (CsA) on nitric oxide production is not related to the immunosuppressive action of the drug, but to the renal toxicity and arterial hyper-tension. In this study the experimental interventions to reverse the inhibition of nitric oxide production by cyclosporin A in rat aortic smooth muscle cells were examined. CsA inhibited the accumulation of nitrite, the stable end product of nitric oxide, in culture media in a concentration $(0.1{\sim}100{\mu}g/ml)-dependent$ manner. The inhibitory effect of CsA on nitrite accumulation were not antagonized by arginine (10 mM), a substrate of nitric oxide synthase, nor by calcium ionophore A23187 $(7{\mu}M)$. Forskolin, an activator of adenylate cyclase, which enhanced iNOS induction at transcriptional level, completely reversed the inhibitory action of CsA on nitrite accumulation. However, PMA (2 nM) and PDB (50 nM), PKC activators, increased the inhibitory action of CsA on nitrite accumulalion. From these results, it is suggested that cyclic AMP-elevating agents may be candidates of therapeutic agents in prevention and treatment of renal toxicity and arterial hypertension induced by CsA. Among conventional antihypertensive drugs, calcium channel blockers and ${\alpha}-blockers$ are preferred to ${\beta}-blockers$.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제44회 동계 정기학술대회 초록집
• /
• pp.546-546
• /
• 2013

Zinc silicate ($Zn_2SiO_4$) has been identified as a suitable host material for a wide variety of luminescent activators, such as transition metal and rare earth elements. In particular, manganese-activated $Zn_2SiO_4$ exhibits highly efficient photoluminescenceand cathodoluminescence, which allows this material to be used in fluorescent lamps and display applications. In this study, we investigated the green and yellow luminescence from Mn-doped $Zn_2SiO_4$ thin films that were synthesized using radio frequency magnetron sputtering followed by annealing at $600{\sim}1,200^{\circ}C$ The refractive index of the $Zn_2SiO_4$: Mn films showed normal dispersion behavior. It was found that the $Zn_2SiO_4$: Mn films annealed at $800^{\circ}C$ ossessed a mixture of alpha and beta phases. The obtained photoluminescence spectrum consisted of two emission bands centered at 525 nm in the green range and 574 nm in the yellow range. The green luminescence originates from the divalent Mn ions in alpha phase of $Zn_2SiO_4$, while the yellow luminescence comes from the divalent Mn ions in beta phase. The films annealed at and above $900^{\circ}C$ xhibited only the alpha phase. The broad PL excitation band was observed ranging from 220 to 300 nm with a maximum at around 243 nm.

• 한국세라믹학회지
• /
• 제55권5호
• /
• pp.461-472
• /
• 2018

$Gd_2O_3:Eu/Bi$ nanoparticles were synthesized via spray pyrolysis and applied for the preparation of a luminescent pearl pigment as an anti-counterfeiting material. The luminescence properties were optimized by changing the $Eu^{3+}$ and $Bi^{3+}$ concentration. Ethylene glycol was used as an organic additive to prepare the $Gd_2O_3:Eu/Bi$ nanoparticles. The highest emission intensity was achieved when the total dopant content was 10.0 at.% and the mole fraction of Bi was 0.1. The concentration quenching was mainly due to dipole-dipole interactions between the same activators, and the critical distances were 9.0 and $19.6{\AA}$ for $Eu^{3+}$ and $Bi^{3+}$, respectively. The prepared $Gd_2O_3:Eu/Bi$ powder exhibited an average size of approximately 82.5 nm and a narrow size distribution. Finally, the $Gd_2O_3:Eu/Bi$ nanophosphor coated on the surface of the pearl pigment was confirmed to have good red emission under irradiation from a portable ultraviolet light-emitting diode lamp (365 nm).

• 한국결정학회지
• /
• 제13권2호
• /
• pp.63-68
• /
• 2002

PDP(Plasma Display Panel)에 적용하고자 하는 녹색 형광체 Zn/sub 2-x/Mn/sub x/SiO/sub 4/를 고상반응법으로 제작하였다. 소성온도, 열처리분위기의 수소와 질소가스의 비 그리고 Mn의 첨가제 및 co-dopant가 형광체의 특성에 미치는 영향에 대하여 관찰하였다. Mn의 농도 x=0.002로 하여 소성온도 1400℃에서 발광특성이 가장 우수하였고, co-dopant의 영향에서는 Cr/sup 3＋/를 첨가하였을 때 다른 첨가제를 사용하였을 때 보다 발광특성이 향상되는 것이 관찰되었다.

• Advances in concrete construction
• /
• 제5권4호
• /
• pp.313-330
• /
• 2017

Geopolymer is a sustainable concrete, replaces traditional cement concrete using alternative sustainable construction materials as binders and alkaline solution as alkaline activator. This paper presents the strength characteristics of geopolymer concrete (GPC) developed with fly ash and GGBS as binders, combined Sodium silicate ($Na_2SiO_3$) and Sodium Hydroxide (NaOH) solution as alkaline activators. The parameters considered in this research work are proportions of fly ash and GGBS (70-30 and 50-50), curing conditions (Outdoor curing and oven curing at $600^{\circ}C$ for 24 hours), two grades of concrete (GPC20 and GPC50). The mechanical properties such as compressive strength, split tensile strength and flexural strength along with durability characteristics were determined. For studying the durability characteristics of geopolymer concrete 5% $H_2SO_4$ solutions was used and the specimens were immersed up to an exposure period of 56 days. The main parameters considered in this study were Acid Mass Loss Factor (AMLF), Acid Strength Loss Factor (ASLF) and products of degradation. The results conclude that GPC with sufficient strength can be developed even under Outdoor curing using fly ash and GGBS combination i.e., without the need for any heat curing.

• 대한화장품학회:학술대회논문집
• /
• 대한화장품학회 2003년도 IFSCC Conference Proceeding Book II
• /
• pp.544-544
• /
• 2003

We investigated the inhibitory effect of whitening materials with growth factor or alone on melanomas derived from Human (B-16) and mouse (SK-MEL-31) using melanin content. Melanin content was determined by the absorbance value at 470nm per cells. we used the growth factors known as activators of Adenylate cyclase, Protein kinase C and tyrosine kinase pathway separately. In addition, we compared the action of UV-induced with non-biological growth factor with whitening materials in melanomas derived from Human and mouse. The results showed that the aspect of inhibitory effect of whitening materials on B16 and SK-MEL-31 was not different. And, the action of each growth factor involved in the differentiation and proliferation of melanoma on the inhibition of melanogenesis in B-16 and SK-MEL-31 using whitening agents showed no difference. Also, The action of UV -induced and non-biological growth factors didn't exhibit different pattern on the effect of whitening agent in B-16 and SK-MEL-31.

• 한국동물학회지
• /
• 제36권4호
• /
• pp.487-495
• /
• 1993

TRH (Thvrotropin-Releasing Hormone) known to regulate the transcription of the TSH (Thyroid-Stimulating Hormones gene in pituitary cells, but little is understood about the mechanism(sl involved. re present study was attempted to elucidate the role of Ca2+ movement through the voltage-gated channels in the regulation of TSH gene transcription. The c-fos is one of immediate early genes and used as model system for the investigation of signaling pathwavs involved in various stimuli. The changes of c-fos mRNA levels were determined after treatment of various agents using Northern and slot hybridization analysis. The c-fos mRNA was rapidly and transiently induced by TRH (about 3-fold) in GH3 cells and this induction was repressed by calcium chelating agent (EGTA), calcium channel blocker (verapamil) anti protein kinase C inhibitor (aminoacridine). The abilities of forskolin (adenvlate cvclase activators, PMA (protein kinase C activator), and A23187 (calcium ionophore) to affect c-ios gene transcription, either alone or in combination with TRH were tested in the same cells. All of them significantly increased the level of c-fos mRUA. However, no additive relationship was observed in all combined treatments except forskolin. These results suggest that TRH action on the c-fos gene activation is mediated by calcium influx as well as through protein kinase C.