• 제목/요약/키워드: Activated alumina

검색결과 78건 처리시간 0.021초

광중합 시 수종의 심미적 수복재와 이장재의 사용에 따른 치수내 온도변화 (TEMPERATURE CHANGES IN THE PULP ACCORDING TO VARIOUS ESTHETIC RESTORATIVE MATERIALS AND BASES DURING CURING PROCEDURE)

  • 장혜란;이형일;이광원;이세준
    • Restorative Dentistry and Endodontics
    • /
    • 제26권5호
    • /
    • pp.393-398
    • /
    • 2001
  • Polymerization of light-activated restorations results in temperature increase caused by both the exothermic reaction process and the energy absorbed during irradiation. Within composite resin, temperature increases up to 2$0^{\circ}C$ or more during polymerization. But, insulation of hard tissue of tooth lowers this temperature increase in pulp. However, many clinicians are concerned about intrapulpal temperature injury. The purpose of this study was to evaluate temperature changes in the pulp according to various restorative materials and bases during curing procedure. Caries and restoration-free mandibular molars extracted within three months were prepared Class I cavity of 3$\times$6mm with high speed handpiece fissure bur. 1mm depth of dentin was evaluated with micrometer in mesial and distal pulp horns. Pulp chambers were filled with 37.0$\pm$0.1$^{\circ}C$ water to CEJ. Chromium-alumina thermocouple was placed in pulp horn below restorative materials for evaluating of temperature changes. This thermocouple was connected to temperature-recording device(Multiplication analyzer MX, 6.000, JAPAN). Temperature changes was evaluated from initial 37.$0^{\circ}C$ after temperature changes to 37.$0^{\circ}C$. Tip of curing unit was placed in the center of prepared cavity separated 1mm from restorative materials. Curing time was 40s. The restorative materials were used with Z 100, Fuji II LC, Compoglass flow and bases were used with Vitrebond, Dycal. Resrorative materials were placed in 2mm. The depth of bases were formed in 1mm and in this upper portion, resin of 2mm depth was placed. This procedure was performed 10 times. The results were as follows. 1. All the groups showed that the temperature in pulp increased as curing time increased 2. The temperature increase of glass ionomer was significantly higher than that of Resin and Compomer during curing procedure (P<0.05). 3. The temperature increase in glass ionomer base was significantly higher than that of Calcium hydroxide base during Resin curing procedure (P<0.05).

  • PDF

블랙드로스 알칼리 침출용액으로부터 hydrotalcite에 의한 규소(IV)의 선택적 흡착 (Selective Adsorption of Si(IV) onto Hydrotalcite from Alkali Leaching Solution of Black Dross)

  • 송시정;이만승
    • 자원리싸이클링
    • /
    • 제28권2호
    • /
    • pp.54-61
    • /
    • 2019
  • 블랙드로스로부터 고순도 알루미나를 회수하기 위해 기계적 활성화 처리한 블랙드로스를 수산화나트륨용액으로 침출하면 미량의 규소(IV)가 함유된 알루미네이트 용액을 얻을 수 있다. 본 연구에서는 hydrotalcite를 사용하여 알루미늄(III)과 규소(IV)의 농도가 각각 13000과 150 mg/L인 5 M의 수산화나트륨용액에서 규소(IV)의 선택적 흡착거동에 대하여 조사했다. Hydrotalcite는 수산화나트륨용액으로부터 규소(IV)만을 선택적으로 흡착하였다. Hydrotalcite의 소성과 농도 및 NaOH의 농도가 규소(IV)의 흡착에 미치는 영향을 조사하였다. 5 M의 수산화나트륨용액에서 규소(IV)의 흡착률은 낮으나 물로 48배 희석하여 소성한 hydrotalcite의 농도가 4.5 g/L 이상인 조건에서 규소(IV)를 대부분 흡착시켜 고순도 알루미나용액을 회수할 수 있었다. 소성한 hydrotalcite에서 규소(IV)의 흡착은 Freundlich 등온흡착식과 잘 일치하였다.

포항-울산간의 점토자원의 지질과 그 물리화학적 특성에 관한 연구 (A Study on Geology of Clay Mineral Deposits of Pohang-Ulsan Area and their Physico-Chemical Properties)

  • 김옥준;이하영;김서운;김수진
    • 자원환경지질
    • /
    • 제4권4호
    • /
    • pp.167-215
    • /
    • 1971
  • I. Purpose and Importance of the Study The purpose of the present study is to clarify to geological, mineralogical, and physico-chemical properties of the clay minerals deposits imbedded in the Tertiary sediments in the areas between. Pohang and Ulsan along southeastern coastal region of Korea. These clays are being mined and utilized for filter and insecticide after activation or simple pulverizing, nontheless activated clays are short coming as chemical industry in Korea has been rapidly grown in recent years. In spite of such increase in clay demand, no goological investigation on clay deposits nor physico-chemical properties of the clays have been carried out up to date. Consequently activated clays produced in Korea is not only of low grade but also of shortage in supply, so that Korea has to import activated clays of better grade. The importance of the present study lies, therefore, on that guiding principle could be laid down by knowing stratigraphical horizons, of clay deposits and fundamental data of improving grade of activated clays might be derived from the results of physico-chemical examinations. II. Contents and Scope of the study The contents of the study are pinpointed down in the following two subjects: 1) General geological investigation of Tertiary formations distributed in the areas between Pohang and UIsan, and detail geological study of the bentonitic clay deposits imbedded in them. 2) To clarifty physico-chemical characteristics of the clays by means of chemical analysis, X-ray diffraction and electron microscope. The scope of the study involves the following there points: i) Regional geological investigation-This investigation has been carried out in order to find out the distribution of Tertiary sediments and exact location of clay mineral deposits in the areas between Pohang and UIsan. ii) Detail geological investigation-This has been concentrated in and around the clay deposits which. had been found out by the regional investigation. iii) Laboratory researchs include i) age determination and correlation of Tertiary sediments by paleontological study, and ii) Chemical analysis, X-ray diffraction, and electron microscopic studies on clays, samples taken from various clay deposits. III. Research Results and Suggestions 1) The geology of the area investigated is composed mainly of Janggi and Beomgokri groups of Miocene age in ascending order rested on the upper Silla system, Balkuksa granite and volcanic rocks of upper Cretaceous age as base. 2) Janggi group is composed in ascending order of Janggi conglomerate, Nultaeri rhyolitic tuff, Keumkwangdong shale, two beds of lignite-bearing formations which consist of alternation of conglomerate, sandstone and mudstone, and andesitic, rhyolitic, and basaltic tuff beds. 3) Beomgokri group is mainly composed of andesitic to rhyolitic tuff interlayered by conglomerate and tuffaceous sandstone. In the areas around boundary between North-and South Kyeongsang-do is distributed Haseori farmation which is composed of conglomerate, sandstone, mudstone and andesitic to rhyolitic tuff, and which is correlated to Eoilri formation of Janggi group. 4) Clay deposits of the area are interbedded in Eoilri, Haseori, Nultaeri tuff, Keumkwangdong shale, upper and lower horizon of the lower lignite-bearing seam, and Keumori rhyolitic tuff formations of Janggi group; and are genetically classi.fied into four categories, that is, i) those derived from volcanic ash beds(Haseori and Daeanri deposits), ii) those of secondary residual type from rhyolitic tuff beds(Seokupri deposits), iii) Clay beds above and beneath the lignite seams, (Janggi and Keumkwangdong deposits), and iv) those derived from rhyolitic tuff beds(Sangjeong and Tonghae deposits). 5) Mineral constituents of clay deposits are, according to X-ray diffraction, montmorillonite accompanied in different degree by cristobalite, plagioclase, quartz, stilbite, and halloysite in rare occasion. The clays are grouped according to mineral composition into four types; i) those consist mostly of montmorillonite, ii) those composed of montmorillonite and cristobalite, iii) those composed of montmorillonite and plagioclase, and iv) those composed of montmorillonite, plagioclase and quartz. 6) Clays interbedded in Haseori formation and vicinity of lignite seams belong to the first type, are of good quality and derived either from volcanic ash bed, or primary clay beds near lignite seams. Clays belonged to other types are derived from weathering of rhyolitic tuff formations and their quality varies depending upon original composition and degree of weathering. Few clays in secondary residual type contain small amount of halloysite. 7) Judging from analytical data, content of silica($SiO_2$) varies proportionally with content of cristobalite, and alumina($Al_2O_3$) content does not vary with that of plagioclase, but increases in the sedimentary bedded type of deposits. 8) It is unknown whether or not these days could be upgraded by beneficiation since no grain size of these impurities nor beneficiation test had been studied. 9) Clay beds derived from valcanic ash layers or sedimentary layers at the vicinity of lignite seams are thin in thickness and of small, discontinueous lenticular shape, although they are of good quality; and those derived from rhyolitic tuff formations or residual type from tuff are irregular in both occurrence and quality. It is, therefore, not only very difficult but also meaningless to calculate its reserve, and reserve estimation, even if done, will greatly be deviated from practically minable one. Consequently, way of discovery and exploitation of clay deposits in the area under consideration is to check the geologically favorable areas whenever needed.

  • PDF

Chlorothalonil의 참깨 및 토양중 잔류소장에 관한 연구 (Residue Determination of Chlorothalonil in Sesame and Soil)

  • 이강봉;조일규;심재한;서용택
    • 한국환경농학회지
    • /
    • 제9권1호
    • /
    • pp.15-22
    • /
    • 1990
  • Chlorothalonil의 참깨 재배중 살포횟수 및 처리시기에 따른 잔류정도와 토양에 처리한 후의 경시적 변화를 관찰하여 다음과 같은 결과를 얻었다. 1. Chlorothalonil의 잔류분석 회수율은 참깨시료를 사용하였을 경우 0.1ppm과 1.0ppm에서 각각 평균 91.2%, 89.6%를 보였고 검출한계는 0.01ppm이었다. 토양시료에서는 0.05ppm과 0.5ppm의 처리에 대한 회수율이 각각 평균 92.8%와 95.4%이었으며 검출 한계는 0.002ppm이었다. 2. Chlorothalonil의 참깨에서의 잔류분석은 Mills등의 방법에서 가장 우수한 성적을 얻을수 있었고 그 결과 수확 3일전 6회 처리는 0.06ppm, 수확 7일전 5회처리는 0.05ppm이 잔류되어 있음을 확인했으며 chlorothalonil의 참깨에 대한 안전사용은 수확 7일 전한, 5회 이내의 사용으로 추천할수 있었다. 3. Chlorothalonil의 토양에서의 잔류분석 결과 처리 0일째 평균 12.95ppm이던 잔류량이 처리후 10일째는 3.28ppm으로 감소되었고 100일이 경과한 후에는 0.03ppm만이 잔류되어 있었으며 곡선회귀식에 의한 chlorothalonil의 토양중 반감기는 8.9일 이었다.

  • PDF

폐플라스틱 열분해 재생유의 불안정한 요인 규명과 무수탄산나트륨으로 품질 향상 (A Close Examination of Unstability and a Quality Improvement using Anhydrous $Na_2CO_3$ in Waste Plastic's Thermal Pyrolysis Oil)

  • 서영화;고광윤
    • 대한환경공학회지
    • /
    • 제29권12호
    • /
    • pp.1371-1380
    • /
    • 2007
  • 폐플라스틱 열분해 재생유의 품질향상을 위하여 불안정화 요인 규명 연구를 수행하였다. 열분해 재생유를 오존화반응시킨 결과 이중결합 불포화탄화수소가 알데히드와 케톤으로 변하면서 폐HDPE 열분해 재생유의 약 45%는 1-알켄구조불포화탄화수소이며, 폐PP 열분해 재생유는 $\sim47%$의 secondary alkene과 $\sim20%$의 primary alkene을 포함한 약 73 wt% 불포화탄화수소를 함유하고 있음을 확인하였다. 오존화 반응 후 기름의 냄새, 짙은 색도가 개선되었는데 이중결합 불포화탄화수소와 관련이 있음을 확인하였다. 저장 용기 별 시험에서는 철제 캔이 갈색유리병보다 좀더 기름의 질 변화를 일으킴을 보여주었다. 기름에 투입된 항산화제는 2-3일 만에 90여 wt%가 소모되면서 항산화제 기능으로 인하여 불포화탄화수소올레핀은 50일이 지나도 안정하였다. 불순물질 제거 흡착여과 시험에서는 실리카, 활성탄, 알루미나 순으로 불순물질 제거효율이 좋으나 수분의 제거효율은 낮았다. 무수탄산나트륨과 무수황산마그네슘이 수분 및 침전물 제거효율이 모두 높으나 실제 열분해재생유 생산 공정에 원가상승을 거의 하지 않은 무수탄산나트륨을 투여 혼합 여과하여 기름의 품질 향상을 달성하였다.

연료전지용 개질기 촉매의 피독방지를 위한 천연가스 중의 황성분 부취제의 선택적 흡착제거 (Removal of Odorants by Selective Adsorption from Natural Gas for Protection of Steam Reforming Catalyst in Fuel Cell from Sulfur Poisoning)

  • 오상승;김건중
    • 공업화학
    • /
    • 제18권4호
    • /
    • pp.337-343
    • /
    • 2007
  • 천연가스의 누출을 감지하기 위해서 첨가되는 유기 황 화합물질인 부취제에 의해 연료전지 내의 스택 전극과 개질기 촉매들이 피독되어 시스템 성능저하의 큰 원인이 되고 있다. 본 연구에서는 실리카, 알루미나, 활성탄, HZSM-5, Ultra-stable Y 제올라이트(USY) 및 베타 제올라이트와 같은 흡착제들을 부취제 제거용 흡착제로 사용하여, tetra-hydrothiophene (THT)와 tert-butylmercaptan (TBM)에 대한 흡착 성능을 연속식 흡착시스템에서 얻은 흡착파과곡선을 비교하여 평가하였다. 제올 라이트의 Si/Al 비, 흡착온도 및 Balance Gas (메탄, 헬륨) 종류의 변화가 흡착성능에 미치는 영향을 조사하고, THT와 TBM의 경쟁적인 흡착특성을 비교하였다. 여러 흡착제 중에서 H형, beta-zeolite (BEA)가 부취제인 TBM과 THT에 대해서 가장 우수한 흡착능력을 나타내었으며, 동일한 흡착제 상에서는 THT가 TBM보다 많은 양으로 흡착제거되었다. Temperature Programmed Desorption (TPD) 및 Infrared 스팩트럼(IR) 분석결과 부취제 황화합물은 제올라이트 표면에서 물리흡착과 더불어 산점에 의한 화학흡착을 이루는 것을 확인하였다.

HAp, Zeolite에 여러 금속 Ion 치환시 나타나는 항균효과 (Antimicrobial Effect of Metal tons Substitution to HAp, Zeolite)

  • 김윤종;김택남;김상배;조성백;조건준;이태형
    • 한국재료학회지
    • /
    • 제11권2호
    • /
    • pp.120-125
    • /
    • 2001
  • 흡착재료에는 hydroxyapatite(HAp), zeolite,, 분자체탄소, 활성탄, 알루미나등의 재료가 많이 사용되고 있다. 이들 흡착재료 중에서 금속이온과 양이온 교환반응이 좋은 HAp, zeolite는 폐수처리과정에서 많이 사용되고 있지만, 피러나 이 폐수처리과정에서 문제되는 것은 유해한 중금속뿐만 아니라 많은 세균들이 이 폐수에 존재하고 있어 수질오염 등의 여러 가지 문제를 야기 시키고 있다. 본 연구는 여러 중금속 흡착재료 중에서 HAp, zeolite에 항균효과가 있다고 알려진 금속이온 (Ag$^{+}$, Cu$^{2+}$, $Zn^{2+}$)들을 이온 치환시켜 항균성을 흡착재료에 부여하고자 한다. HAp, zeolite에 Ag$^{+}$, Cu$^{2+}$, $Zn^{2+}$의 금속이온들을 치환시킨 후, E. Coli로 항균효과를 측정하였다. HAp, zeolite와 여러 금속이온 치환후의 항균효과를 측정한 결과, Ag$^{+}$ 로 이온치환 시킨 HAp, zeolite에서는 1$\times$$10^{-2}$cell/ml 농도의 E. Coli에서 24시간가지 완벽한 항균효과를 보였고, Cu$^{2+}$$Zn^{2+}$으로 이온치환 시킨 경우에서는 좋은 항균효과를 보이지 않았다. 이러한 결과는 Feng. et. al.이 발표한 바와 같이1) Ag ion이 cell내부의 DNA에 영향을 기척, 복제능력을 떨어뜨리고 Cell을 비활성화 시키기 때문이다.

  • PDF

인증표준물질(Certified reference materials, CRM)을 이용한 이옥신류(PCDDs/PCDFs) 측정의 정확도 평가 (Evaluation of accuracy for measurement of Dioxins (PCDDs/PCDFs) by using certified reference material (CRM))

  • 윤여영;박덕희;임영희;조혜성
    • 분석과학
    • /
    • 제22권5호
    • /
    • pp.376-385
    • /
    • 2009
  • 본 연구에서는 고농도 PCBs (Polychlorinated biphenyls)로 오염된 토양류 인증표준물질(Certified reference materials, CRM) 내에 존재하는 17종의 PCDDs/PCDFs를 분석하여 측정의 정확도를 평가하였다. 분석 방법은 2007년 환경부에서 고시한 비의도적 잔류성유기오염물질 공정시험방법을 토대로 하였으나 다층 실리카겔 컬럼과 알루미나 컬럼으로만 정제 시 방해 물질들이 충분히 제거되지 않아 활성탄 컬럼을 추가하여 정제하였다. 정확도의 평가 지표로서는 한국표준과학연구원(KRISS)에서 제시한 |En| 값을 사용하였으며 |En|값이 1이하인 경우 정량 결과를 '만족'으로 판정한다. 본 실험에서 DB-5MS컬럼과 SP-2331 컬럼을 병용하여 CRM을 분석한 결과 17종 2,3,7,8-치환이성체 모두 1 이하의 |En| 값을 얻었다. 또한 DB-5MS 컬럼에서 분리되지 않는 1,2,3,7,8-PeCDD와 3,3',4,4',5,5'-HxCB는 선택 이온비를 EPA1613 방법에서 제시한 M+2/M+4 대신 M/M+2로 변경하여 HRGC/HRMS 분석에서 구분이 가능하도록 하였다.