• Journal of Environmental Health Sciences
• /
• v.24 no.2
• /
• pp.104-109
• /
• 1998

The objective of this study was to examine the effect of polymer coating on the initial microorganism attachment and the biofilm growth. Such as nonion(polyacrylamine), anion(CMC-Na) and cation polymer coagulant(chitosan and PEI) were used for coating material of the support carrier(acryl plate). When polymer coagulant was coated with 5, 10, 20, 35, 50, 100 and 200 mg/l on the surface of acryl plate, initial microorganism attachment increased and optimum concentration for the attachment was 35 mg/l. Biofilm growth experiments were conducted with the substrate loading of 12.7gSCOD/$m^2\cdot$ day using RBC. The polymer coagulants such as CMC-Na, polyacrylamide, PEI and chitosan coating on the acryl plate facilitated the biofilm growth of microorganisms. Until the biofilm dry weight grows up to 0. 0038g/cm$^2$, biofilm growth on the plate coated with cation polymer like chitosan was better than that on the coated plate of nonion(polyacrylamine), anion(CMC-Na) polymer coagulant.

• Journal of the Korean institute of surface engineering
• /
• v.47 no.3
• /
• pp.137-146
• /
• 2014

The important drawback of epoxy electrodeposition(ED) coatings is the lack of the weathering resistance caused by the structure of bisphenol A. To improve this yellowing phenomena, acryl ED coatings have been developed. Compared with the epoxy ED coatings, however, acryl ED coatings are relatively weak in the corrosion resistance and mechanical properties. The purpose of this study is complemented their drawbacks by mixing epoxy and acryl ED paints. The salt spray, accelerated weathering test(QUV) and cupping, bending, impact test were employed to investigate the corrosion resistance, weathering resistance, and mechanical properties of ED coatings. When the ratio of acryl to epoxy resin of ED coating is 0.33, the weathering resistances are appropriately improved in condition maintaining the corrosion resistance. It was shown that the weathering resistance for epoxy ED coating was adjusted by optimally mixing acryl ED paint.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1999.04a
• /
• pp.433-436
• /
• 1999

Long-term durability of the reinforced concrete structures exposed to marine environment deteriorates seriously by the attack of the chloride ion from see water results in corrosion of steel reinforcement in concrete. Their coating effect is aluminum oxide-isocyanate-based coating material, resistance of chloride penetration, carbonation and freezing and thawing resistance were compared to acryl-based coating material and sealer type o waterproofing material. Aluminum oxide-isocyante-based and acryl-based coating material show higher resistance to chloride penetration and carbonation than the sealer type do waterproofing material and aluminum oxide-isocyanate-based coating resist about 99% of chloride penetration. Resultants to the accelerated test for freezing and thawing, coating concrete show higher resistance than non-coating concrete, respectively.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.22 no.11
• /
• pp.1538-1546
• /
• 1998

The aim of this study is to investigate the characteristics of the catalytic burner to bum LPG and toluene alternately which can be applied to the dryer of an acryl coating process of textile. It was difficult to obtain complete conversion when the catalytic burner was installed to downward direction. The catalytic burner was improved by introducing the forced diffusion combustion air and the premixing air. The optimal operating conditions for the newly improved catalytic burner were obtained. The catalytic burner for toluene mixture was also investigated to incinerate toluene mixture exhausted from drying process. Results showed that the catalytic burner could oxidize toluene mixture completely at the proper operating conditions. Finally, the catalytic burner to bum LPG and toluene alternately was applied to the dryer of acryl coating. By using the catalytic burner, benefits of energy savings and environmental protection were obtained.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.47 no.5
• /
• pp.134-140
• /
• 2015

This study was carried out to evaluate whether EVAc, acryl latex and biobinder could substitute the part of SB latex for pre-coating color formula or not. Different coating colors prepared through the substitution of 30% SB latex with EVAc, acryl latex, and biobinder were applied for pre-coating layer. 100% SB latex is used as a binder for top coating color. The optical properties, gloss, roughness, stiffness, dry- and wet-pick strength were measured. There were no significant differences in the brightness, whiteness, opacity, roughness, ink set-off and gloss of paper coated with 5 different coating colors. However the stiffness, dry- and wet-pick strength were somewhat lower than those of conventional coating color which 100% SB latex was used as a binder. Although the part of SB latex could be substituted with EVAc, acryl latex and biobinder without sacrificing the qualities of coated paper. Further researches on the improvement of stiffness, dry- and wet-pick strength, and the optimization of rheology of coating color in order to improve the qualities of coated paper are strongly recommended.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2008.04a
• /
• pp.138-140
• /
• 2008

현재 현수막의 코팅에서 기능을 부여하는 수요가 늘고 있다. 본 실험에서는 코팅제의 유기용제 사용으로 인한 환경오염 문제및 폐기물 처리비용 부담을 줄이기 위하여 수성코팅제를 개발하려한다. acryl binder, 탄산칼슘, silica, 유화제등을 혼합한 코팅제를 knife coating한 후 170$^{\circ}C$로 1분 30초간 열처리 하였다. 이때 acryl binder의 첨가비율은 35${\sim}$55%로 변화를 주었다. 처리한 폴리에스테르에 DTP printing을 한 후 CCM 측정, 내수성, 접착성을 알아본 결과 acryl binder의 첨가비율은 45%일때 가장 우수한 발색성 및 printing 특성을 나타내었다. 기존 수성코팅제에 대비 20${\sim}$30% 발색성이 개선되었다.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.47 no.5
• /
• pp.141-146
• /
• 2015

This study was carried out to elucidate the partial substitutability of SB latex with environmental-friendly coating binders for coated paper. Starch-based biobinder, ethylene vinyl acetate and acryl-based binder were evaluated for this purpose. Several combinations of above binders were applied to top layer coating, and properties of coating colors and printability were evaluated. When 20% and 30% of SB latex were substituted by acryl-based synthetic binder, ethylene vinyl acetate and biobinder, the brightness, whiteness and opacity of coated paper were similar to those obtained from SB latex. Ink set and stiffness of coated paper manufactured through 20% and 30% substitution of SB latex by biobinder and EVAc were improved, but dry- and wet-pick strength were decreased. The research works on the improvement of dry- and we-pick strength, mechanical stability and rheological properties at high shear condition should be continued for the commercial application of biobinder, EVAc and acryl-based binder.

• Polymer(Korea)
• /
• v.36 no.3
• /
• pp.351-356
• /
• 2012

Acryl binder is a representative organic additive for the manufacture of the display electronic equipment. Acryl binder is usually synthesized by radical copolymerization. Glycidyl methacrylate (GMA), methyl methacrylate (MMA), and methacrylic acid (MAA) were used in this copolymerization of acryl binder. In this study the silane type mercaptane compound was used as a chain transfer agent (CTA) to enhance the adhesion property of the acrylic binder. The CTA used in this experiment was (3-mercaptopropyl) trimethoxysilane (MPTMS). Molecular weight of the copolymer, thickness of the coating, transmittance, and adhesion property were measured. The molecular weight was controlled and the adhesion property was improved by using this silane type chain transfer agent.

• Journal of the Korea Convergence Society
• /
• v.9 no.4
• /
• pp.93-98
• /
• 2018

This study was wanted to confirm ability for UV blocking according to its material. The lenses materials were Acryl, CR-39, NK-55, and MR-8. It was grouped: Group A consisting of anti-scratch hard coated lenses and anti-refractive multi coated lenses, Group B added UV blocking coating on the group A, and Group C consisting of only UV blocking lenses. The results measured UV transmittance, On the UV-A wavelength, Group A showed the UV transmittance of 7.726%, 0.043%, 0.007%, and 0.007% respectively. Group B showed 0.038%, 0.037%, 0.007%, and 0.007%, respectively. The UV-blocking performance of CR-39 has been greatly improved. Group C has shown the best UV blocking function; only 0.005% and 0.004% of UV transmittances.(1.60 and 1.67 index of refraction respectively). For the low power of lenses and sunglasses, the CR-39 lens is the most used. Therefore, to UV blocking from the lens, new materials or UV absorbers or UV coating technology and development of Converged Technologies are required.

• Journal of the Korean Applied Science and Technology
• /
• v.38 no.6
• /
• pp.1678-1686
• /
• 2021

In this study, we prepared phosphorous flame-retarding coating solutions by mixing triphosphate (3 phosphonate), phytic acid (6 phosphonate), or ammonium polyphosphate (10 phosphonate) with boric acid as a crosslinking agent and acryl resin binder. Prepared phosphorous flame-retarding coating solutions were coated onto non-woven fabrics, respectively, to obtain high flame-retarding effects. These prepared flame-retardant non-woven fabrics were evaluated using smoke density standard test (ASTM E662), limit oxygen index standard test (ISO E622), and vertical burning standard test (UL 94). Their flame-retarding effects were affected by the number of phosphonate groups. Regardless of natural or synthetic binder resins, their effects showed the following order: ammonium polyphosphate > phytic acid > triphosphate. Natural hydrocarbon compounds were also examined to determine the possible retardancy of binder resins. Results showed that natural hydrocarbon binder resins could be used for preparing fire-retardant nonwoven fabrics.