• 한국소음진동공학회논문집
• /
• 제15권8호
• /
• pp.939-944
• /
• 2005

In this paper, a sound quality index for the evaluation of the vehicle intake noise was developed through a correlation analysis of the objective measurement and the subjective evaluation. First, intake orifice noise was measured at the wide-open throttle sweep condition. And then, the acoustic transfer function between intake orifice noise and interior noise was measured. Simultaneously, subjective evaluation was carried out with a 10-scale score by 8 special engineers. The correlation analysis between the psychoacoustic parameters derived from the measurement and the subjective evaluation was performed. The most critical factor was determined and the corresponding sound quality index for intake noise was obtained from the multiple factor regression analysis method. Finally, the effectiveness of the proposed index was validated.

• 소음진동
• /
• 제9권4호
• /
• pp.785-794
• /
• 1999

The panel contribution analysis to reduce interior booming noise of a passenger car is carried out using both experimental method and numerical one. The accelerations of panels are measured on the outer surface of car body during operation. The acoustic characteristic of cavity is represented by two different ways. One is the acoustic transfer function obtained by experiment with reciprocal manner. The other is the boundary element model and numerical results of the model are calculated using SYSNOISE. The results from numerical method show more good agreement with measured sound pressure levels than the experimental one. Contributions of panels for interior noise are ranked and structure of the car is reinforced according to the results, which shows that the panel contribution analysis is a powerful tool to lessen structure-borne noise of passenger vehicle.

• 음성과학
• /
• 제12권1호
• /
• pp.27-35
• /
• 2005

Differential instrumentation for the diagnoses of individuals with Cleft palate has been used to objectively measure speech problems. The Cepstrum Method was used to study the vocal tract transfer function. The vocal tract transfer function and the source spectrum should be considered in the evaluation of nasal resonance. The aim of this study was to collect quantitative data on the acoustic Instrumentation used for evaluating hypernasality. Normal subjects (9 male, 21 female; 37 male children, 20 female children) and individuals with VPI (13 male, 8 female; 16 male children, 9 female) participated in this study. The vowel /i/ was selected to gauge the severances of hypernasality Spectral and Cepstral studies using CSL was used to identify the acoustic characteristics. Cepstrum analysis shows significant differences in quefrency and amplitude. The quefrency of normal groups was shorter than that of the VPI groups, while the amplitude of normal groups was lower than that of the VPI groups. This may have significance in the evaluation 'of nasal resonance.

• 조명전기설비학회논문지
• /
• 제13권3호
• /
• pp.17-24
• /
• 1999

본 연구는 스피터와 마이크폰쌍을 이용하여 변압기 소음 감소를 위한 적응 능동소음제어에 있어서 스피커-증폭기-마이크로폰 경로와 스피거-마이크로폰 쌍의 동특성에 대한 이론적인 내용과 시뮬레이션을 통하여 이를 확인하였다. 또한 음향경로 내에 존재하는 마이크로폰-스피커 쌍의 전달함수를 SLS(sequential least square)알고리즘으로 추정하였으며, 추정된 전달함수에 대한 identify는 z 평면에서 안정된 극점과 영점을 갖고 있음을 확인하였다.

• 설비공학논문집
• /
• 제14권8호
• /
• pp.648-655
• /
• 2002

For a discharge system of rotary compressor, analytical investigation on the discharge gas pulsation has been carried out. With the aid of four pole theory, acoustic impedance of the discharge system composed of muffler and cavities on both sides of motor with gas passages between them can be calculated using discrete acoustic elements described by transfer matrices, yielding the relationship between discharge mass flow rate and gas pulsation at the discharge port. This method of predicting the gas pulsation was validated by measurement data. Effects of change in discharge muffler geometries on the gas pulsation also were investigated, demonstrating that this method can be used for muffler design.

• 한국음향학회지
• /
• 제33권1호
• /
• pp.54-59
• /
• 2014

본 논문은 비정상 (nonstationary)특성을 가지는 잡음환경에서 마이크간 전달함수 비 (RTF, Relative Transfer Function) 추정 알고리즘을 제안한다. 음성을 이용한 다양한 기기에 다중 마이크를 이용한 잡음제거 기술은 널리 사용되며, 이때 각 마이크간의 입력 신호 사이의 관계는 필수적으로 추정되어야 한다. 본 논문에서는 기존의 OM-LSA(Optimally-Modified Log-Spectral Amplitude)기반의 추정 방식에 CASA (Computational Auditory Scene Analysis)를 접목시킨 방식을 제안한다. 제안한 방법의 성능 검증을 위하여 비정상 백색 잡음 (nonstationary white Gaussian noise) 환경에서 10명 화자 발음을 이용한 마이크간 전달함수 비 추정 성능 평가 실험을 수행하였다. 잡음 신호가 초당 8dB 증감하는 환경에서 SBF (Signal Blocking Factor)가 평균 2.65dB 개선됨을 확인하였다.

• 대한기계학회논문집A
• /
• 제34권8호
• /
• pp.1035-1044
• /
• 2010

머리관련 전달함수는 음원으로부터 이도의 입구까지 소리의 전달함수로 인간이 소리의 위치를 판단하는 데 중요한 역할을 하는 함수이다. HRTF 는 개인간의 편차가 크게 나는 것으로 알려져 있다. 본 논문에서는 한국인의 평균두형에 관해서 HRTF 를 해석하는 경계요소해석 모델을 개발하고 해석 결과와 실험결과와의 비교를 통해서 모델을 검증하였다. 또한 특정 성인에 대하여 CT 촬영을 통하여 두형, 귓바퀴 및 이도의 형상을 획득하여 이를 바탕으로 이도 내의 음향응답을 전 가청주파수에서 해석할 수 있는 모델을 개발하고 실험과의 비교를 통하여 모델을 검증하였다. 개발된 모델을 이용, 경계요소 해석을 수행하고 한국인 HRTF 의 특성에 영향을 미치는 인자를 살펴보았다.

• 한국추진공학회지
• /
• 제21권5호
• /
• pp.54-60
• /
• 2017

연소불안정 연구의 일환인 화염전달함수에서 나타나는 gain의 특성을 파악하기 위하여 비연소상태에서의 전달함수를 도입하여 화염전달함수에서의 특성과 비연소전달함수의 특성에 대한 원인을 파악하고자 하였다. 비연소 전달함수를 획득하기 위하여 질소와 이산화탄소를 활용하였으며, 입력값과 출력값을 계측하기 위하여 열선풍속계를 이용하였다. 비연소 전달함수에서의 gain과 주파수의 peak는 비활성기체의 밀도와 유량에 대하여 영향을 받는 것을 확인하였다. 또한 연료공급라인에서의 음향학적 공진주파수가 peak 주파수에 영향을 주는 것을 확인하였다.

• 설비공학논문집
• /
• 제9권2호
• /
• pp.221-228
• /
• 1997

A strong combustion-driven sound from a surface burner made of a perforated metal fiber plate for premixed gas was investigated to clarify the physical mechanism of its generation. A simple model was developed for the acoustic power generation in terms of the heat transfer response function and the acoustic impedance of the burner. The acoustic impedance of the perforated metal fiber placed on the open exit was measured and the heat release response of the burner to the oscillating flow associated with the acoustic disturbance was expressed in terms of a response function. It was found that the power is generated by the heat release in response to the downstream particle velocity, in contrast to the upstream velocity in the case of the Rijke oscillation driven by a heater placed in the lower half of a columm with upstream flow. The measured frequencies of the oscillation were in agreement with the estimated resonance frequencies and their excitation was varied with the combustion conditions. For the same fuel rate, the excited frequency increases with the air ratio if it is low but decreases with the ratio if not so low. Such frequency characteristics were explained by assuming a heat release response function with a time constant and it was shown that the excited frequency decreases as the time constant increases.

• 한국소음진동공학회논문집
• /
• 제15권10호
• /
• pp.1131-1136
• /
• 2005

For the accurate measurement of acoustic properties of a surface, efforts have been made to reduce errors caused by external disturbance. If the reflection coefficient is considered as a transfer function between reflected wane and incident wave, the causality is required between them and the reflection coefficient should be of minimum phase. In this thesis, the minimum phase condition is applied to measure correct reflection coefficient. The reflection coefficient is approximated as a rational function In the Z domain by minimizing the sum square error. Then the minimum phase reflection coefficient is reconstructed using the distribution of poles and zeros of the reflection coefficient model.