• 한국음향학회지
• /
• 제14권6호
• /
• pp.40-47
• /
• 1995

초음파펄스의 주파수해석에 의하여 재료의 음속과 감쇠계수 및 복소모듈러스를 동시에 측정하는 시스템을 구축하고 그 특성을 평가하였다. 이 시스템은 초음파현미경의 기계구동부와 공진주파수 85MHz의 ZnO 평면 트랜스듀서에 의해 구성되며, 음속은 시료의 표면과 저면에서 반사되어온 두개의 펄스파가 동시에 포함되도록 게이트한 후 파워스펙트럼을 구하였을 때 생기는 주파수영역에서의 극대점(또는 극소점)간의 간격으로부터, 감쇠계수는 그 두 펄스파의 각각에 대한 파워스펙트럼준위와 표준시료 표면으로 부터의 반사파의 파워스펙트럼준위로부터 구하여진다. 구축된 시스템을 용융석영, 폴리에스텔막등의 재료에 적용한 결과 정도 높은 계측이 가능함을 알았다.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제21권6호
• /
• pp.128-134
• /
• 2016

Acoustic emission spectra was analyzed to investigate the distribution of sound pressure in a 36 kHz sonoreactor. The sound pressure of fundamental frequency (f: 36 kHz), harmonics (2f: 72 kHz, 3f: 108 kHz, 4f: 144 kHz, 5f: 180 kHz, 6f: 216 kHz), and subharmonics (1.5f: 54 kHz, 2.5f: 90 kHz, 3.5f: 126 kHz, 4.5f: 162 kHz, 5.5f: 198 kHz, 6.5f; 234 kHz) was measured at every 5 cm from the ultrasonic transducer using a hydrophone and a spectrum analyzer. It was revealed that the input power of ultrasound, the application of mechanical mixing, and the concentration of SDS affected the sound pressure distributions of the fundamental frequency and total detected frequencies frequencies significantly. Moreover a linear relationship was found between the average total sound pressure and the degree of sonochemical oxidation while there was no significant linear relationship between the average sound pressure of fundamental frequency and the degree of sonochemical oxidation.

• 조명전기설비학회논문지
• /
• 제14권5호
• /
• pp.43-49
• /
• 2000

MH 랭프의 전자식 안정기에서 발생하는 음향공명의 감소를 위한 새로운 제어 방법올 제시한다. 주파수 가변 공전 인버터를 해석하고 전달함수를 구한다. 안정기의 전류제어기로 적분길를 채용한다. 램프전력 교란 및 주파수 확산을 이용하며 음향공명올 감소시키 위해 전류제어기 입력에 200[Hz] 정현파를 부가하여 램프 전류를 진폭 변조시킨다.MH 250[W] 램프를 대상으로 변조도에 따른 램프의 아크 안정성을 조사하고 제안된 진폭변조에 의한 음향공명 감소법 및 전류 제어기 설계법의 타당성을 확인하였다.

• 음성과학
• /
• 제9권2호
• /
• pp.25-47
• /
• 2002

Human language activity in the information society has been developing the communication system between humans and machines. The aim of this study was to analyze dialectal speech in Korea. One hundred Kyungsang and one hundred Cholla informants participated in this study. A CSL and Flexible laryngeal fiberscope were used for analysis of the acoustic and glottal gestures of all the vowels and consonants. Test words were made on the picture cards and letter cards which contained each vowel and each consonant, respectively. The dialogue between the examiner and the informants was recorded in a question and answer manner. The acoustic results of two dialects were as follows: Kyungsang and Cholla informants showed neutralization between /e/ and /$\varepsilon$. However, the apertures of Kyungsang vowels /i, w, u, o/ were higher than those of Cholla vowels. The /wi/ and /$\varepsilon$/ of Kyungsang Diphthong vowels were shown as simple vowels /i/ and /$\varepsilon$/ in Cholla dialect. The VOT of Cholla dilaect was longer than that of Kyungsang dialect. The fricative frequence of Kyurlgsang dialect was about 1000Hz higher than that of Cholla dialect. The glottal widths on fiberscopic images showed that the consonant durations of Kyungsang and Cholla dialects were correlated all together with the acoustic duration on the spectrogram.

• 한국음향학회지
• /
• 제42권5호
• /
• pp.452-459
• /
• 2023

음파의 힘을 이용하는 음향집게는 나노 단위의 세포외소포에서 밀리미터 단위의 대규모 다세포생 물체까지 다양한 생체 입자를 조작하는 데 사용되는 매우 유용한 도구이다. 해당 분야는 수십년간 점진적인 개발이 이루어지고 있으며, 단일 초음파 빔을 사용하는 단일 빔 음향 집게(Single Beam Acoustic Tweezers, SBAT)기술 또한 세포 및 생물체 정밀 이동 및 분석이 가능한 플랫폼으로 발전했다. 최근 혁신적인 발전으로 SBAT를 이용하여 입자/세포 분리, 단일 세포 변형 기술이 개발되었으며 이로 인해 의공학 분야에서 학문적인 관심을 모으고 있다. 본 종설에서 SBAT기술의 기초 원리와 작동 방법에 대해서 설명하며 그간의 연구를 요약하고 이를 바탕으로 향후 연구에 대해서 전망한다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2008년도 춘계학술대회논문집
• /
• pp.185-188
• /
• 2008

This paper introduces the Bootstrap method for statistical analysis of noise and vibration spectrum in aeronautic and space fields. Generally, all components of a launch vehicle and its payloads are subjected to high intensive noise and vibration environment during the lift-off phase and the ascent phase through Mach =1 and Max Q. In order to verify their survivabilities against these severe vibroacoustic environments during qualification tests and acceptance tests, it is most important to estimate the proper upper limits of the environmental condition. Although NASA has typically utilized the Normal Tolerance Limit method in deriving these levels, the reference[1] says that the Bootstrap can be also an alternative method to estimate the maximum expected environments. In this paper, a general procedure of the Bootstrap method is summarized, and it is applied to analyze acceleration power spectral density functions, which were measured during acoustic test on the upper stage of KSLV-I.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2004년도 전력전자학술대회 논문집(2)
• /
• pp.887-890
• /
• 2004

This paper presents a microprocessor controlled electronic ballast for HID lamps, which gives automatic switching between MH and HPS lamps. Lamp identification is carried out by checking variation of lamp impedance at warm-up phase. Direct spread spectrum is done by applying 1 kHz triangular wave for removing acoustic resonance. This frequency modulation of 1 kHz gives also low EMI level. The microprocessor controls the voltage of DC-bus, the voltage of ignition pulses, the power of output. A 250W electronic ballast is implemented with ATmega16 CPU.

• 한국조명전기설비학회지:조명전기설비
• /
• 제11권6호
• /
• pp.64-73
• /
• 1997

RPWM(Random Pulse Width Modulation)은 인버터의 스위칭 주파수를 랜덤(random)하게 변화시킴으로써 고조파 및 소음의 파워 스펙트럼을 광대역에 분산시켜 사람이 불쾌하게 느낄 수 있는 전자기적 가청 소음을 줄이기 위한 PWM 기법으로써 근래에 매우 각광받고 있다. 본 연구에서는 삼각파(반성파, carrier wave)의 주파수를 랜덤하게 변화시키는 방식의 RPWM에 의한 인버터 유도전동기 구동 장치를 구성하였다. 무항실에서 실험 측정한 소음의 파워 스펙트럼으로부터, 소음원에 대한 분석과 삼각파 주파수 변화 폭에 따른 스위칭 주파수대 소음의 저감 효과를 분석하였다. 고속의 DSP TMS320C31을 사용하여 속도 제어와 더불어 RPWM이 실시간적으로 가능하도록 하여, 부하 조건이 다양하게 변화하는 구동 장치에서도 삼각파 주파수의 중심 주파수 및 대역폭을 자유롭게 변화시킴으로써 효과적으로 스위칭 주파수대 가청 소음을 저감하였다.

• 대한기계학회논문집
• /
• 제18권5호
• /
• pp.1253-1263
• /
• 1994

The experimental study is carried out to identify the combustion generated noise mechanism in free turbulent jet diffusion flames. Axial mean fluctuating velocities in cold and reacting flow fields were measured using hot-wire anemometer and LDv.The overall sound pressure level and their spectral distribution in far field with and without combustion were also measured in an anechoic chamber. The axial mean velocity is 10-25% faster and turbulent intensities are about 10 to 15% smaller near active reacting zone than those in nonreacting flow fields. And sound pressure level is about 10-20% higher in reacting flow fields. It is also shown that the spectra of the combustion noise has lower frequency characteristics over a broadband spectrum. These results indicate that the combustion noise characteristics in jet diffusion flames are dominated by energy containing large scale eddies and the combusting flow field itself. Scaling laws correlating the gas velocity and heat of combustion show that the acoustic power of the combustion noise is linearly proportional to the 3.8th power of the mean axial velocity rather than 8th power in nonreacting flow fields, and the SPL increases linearly with logarithmic 1/2th power of the heat of combustion.

• International Journal of Ocean Engineering and Technology Speciallssue:Selected Papers
• /
• 제4권1호
• /
• pp.44-50
• /
• 2001

Existing surface defects in structural members often act as sites of fatigue crack initiation, and if undetected, these cracks may grow through the thickness of the member, leading to catastrophic failure of the structure. Thus, in-service monitoring of fatigue cracks through reliable and effective nondestructive techniques is an important ingredient in the leak-before-break (LBB) design and safe operation of defects critical structures. An advanced, waveform-based, acoustic emission (AE) technique has been used in this paper to study the characteristics of the signals emanating from the initiation, growth and through-the -thickness penetration of surface fatigue crack in a 6061 aluminum plate. The goal of this experimental study is to determine whether the evolution of the fatigue crocks could be identified from the properties of the waveforms produced during the tests. The AE waveform signals detected at different stages of crack growth was found to have different temporal and spectral characteristics. The data analysis technique presented here can be applied to real-time monitoring of the initiation and propagation of fatigue cracks in structural components.