• 수산해양기술연구
• /
• 제40권2호
• /
• pp.115-125
• /
• 2004

장기선 방식의 무선부이식 3차원 수중 위치 측정 시스템을 적용하여, 유향 및 유속에 따른 정치망 원통의 체적 변화를 구명하기 위한 현장실험을 2003년 4월 10일부터 4월 23일까지 자란만의 정치망에 대해서 실시하였다. 현장 실험에서 사용한 총 7개의 핑거 중 6개는 원통의 길이 방향에 부착하였고, 나머지 1개는 해저에 고정시켰다. 그리고, 유향 및 유속을 측정하여 정치망 원통의 체적변화를 조석 주기에 따라 분석하였으며, 그 결과는 다음과 같다. 1. 소형 가두리의 고정점에서 핑거의 x축, y축, Z축에 대한 위치오차는 0.2m, 0.4m, 0.1m로 나타났고, 평면상의 위치를 나타내는 y축 방향의 오차가 가장 크게 나타났다. 핑거의 위치가 수파기를 잇는 기선 혹은 내부에 있기 때문에 위치오차가 작았고, 따라서 체적계산에 적용한 오차도 작았다. 2. 소조기 2003년 4월 11일(음력 3월 10일) 원통 의 체적 최소, 최대는 각각 4,173$m^3$, 4,757$m^3$으로 나타났고, 이 때의 유향 및 유속은 99.9$^{\circ}$, 12.9cm/s, 104.0$^{\circ}$, 2.4cm/s이었다. 원통 체적의 최대 변화폭은 584$m^3$으로 나타났다. 3. 대조기 2003년 4월 17일(음력 3월 16일) 원통의 체적 최소, 최대는 각각 2,016$m^3$, 4,454$m^3$으로 나타났고, 이 때의 유향 및 유속은 315.6$^{\circ}$, 16.1cm/s, 289.0$^{\circ}$, 5.7cm/s이었다. 원통 체적의 최대 변화폭은 2,438$m^3$으로 나타났다. 4. 조석주기에 따른 원통의 최대 변화폭은 소조에서 대조로 변하는 4월 11일부터 16일(2,579$m^3$)에 비하여 대조에서 소조로 변하는 4월 17일부터 20일 (3,552$m^3$)이 약 1.4배 이상이었다.

• The Journal of the Acoustical Society of Korea
• /
• 제21권2E호
• /
• pp.71-80
• /
• 2002

This paper suggests the Cardioid beamforming algorithm of the doublet sensors employing DIFAR (directional frequency analysis and recording) sensor signals in the frequency domain. The algorithm enables target bearing estimation using the signals from directional sensors. The algorithm verifies its applicability by successfully estimating bearings of a target projecting ten narrow-band signals in shallow water. The estimated bearings agree very well with those from GPS (global positioning system) data. Assuming the bearings from GPS data to be real values, the estimation errors are analyzed statistically. The histogram of estimation errors in each frequency have Gaussian shape, the mean and standard deviation dropping in the ranges -1.1°∼ 6.7°and 13.3∼43.6°, respectively. Estimation errors are caused by SNR (signal to noise ratio) degradation due to propagation loss between the source and receiver, daily fluctuating geo-magnetic fields, and non-stationary background noises. If multiple DIFAR systems are employed, in addition to bearing, range information could be estimated and finally localization or tracking of a target is possible.

• 한국소음진동공학회논문집
• /
• 제13권2호
• /
• pp.83-91
• /
• 2003

Pantograph design Process must be considered in terms of stability of aerodynamics and reduction of aeroacoustics. Furthermore pantograph needs to be insensible to severe circumstance condition like typhoon, tunnel, a change of season. In this paper, robust design of panhead sections is conducted based on the Taguchi's design of experiment method. In the aeroacoustic noise analysis, an acoustic analogy using the Ffowcs Williams and Hawkings(FW-H) equation is used to calculate the flow induced sound pressure level in aeroacoustics. From the near-field CFD analysis data, the far-field noise is predicted at the positions of 25 m away from Pantograph. Based on aerodynamic(CFD) and aeroacoustic(FW-H) analysis data, the optimal sizing and Positioning of panhead elements are determined using robust design optimization method. Design parameters such as thickness, length and radius are controllable factors, while outdoor air temperature and atmospheric pressure are considered as uncontrollable factors in the context of Taguchi's approach. A number of CFD simulation and aeroacoustic analysis are performed based on orthogonal arrays. In this paper, two-step optimization method is used as a parameter design procedure. It is executed using signal to noise(S/N) ratio and analysis of means(ANOM) method. So Thus, an optimal level of design parameters Is extracted to minimize the disconnection ration between contact strips and catenary system, and reduce the far-field aeroacoustic noise.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2001년도 추계학술대회논문집 II
• /
• pp.1235-1241
• /
• 2001

Pantograph design process must be considered in terms of stability of aerodynamics and reduction of aeroacoustics. Furthermore Pantograph needs to be insensible to severe circumstance condition like typhoon, tunnel, a change of season. In this paper, robust design of panhead sections is conducted based on the Taguchi's design of experiment method. In the aeroacoustic noise analysis, an acoustic analogy using the Ffowcs Williams and Hawkings (FW-H) equation is used to calculate the flow induced sound pressure level. From the near-field CFD analysis data, the far-field noise is predicted at the positions of 25m away from panhead contact strips. Based on aerodynamic (CFD) and aeroacoustic (FW-H) analysis data, the optimal sizing and positioning ofpanhead elements are determined using robust design optimization method. Design parameters such as thickness, length and radius are controllable factors, while outdoor air temperature and atmospheric pressure are considered as uncontrollable factors in the context of Taguchi's approach. A number of CFD simulation and aeroacoustic analysis are performed based on orthogonal arrays. Using a parameter design procedure associated with signal-to-noise (SIN) ratio and sensitivity analysis, an optimal level of design parameters are extracted to minimize the disconnection ratio between contact strips and catenary system, and reduce the far-field aeroacoustic noise.

• 한국정보통신학회논문지
• /
• 제12권7호
• /
• pp.1202-1208
• /
• 2008

본 논문에서는 유삭식 심해무인잠수정인 해미래와 진수장치인 해누비로 이루어지는 심해무인잠수정 시스템의 항법 알고리즘에 사용되는 다중 센서 융합 기법에 대하여 소개하고 있다. 수중 위치 추적 시스템의 성능은 초단기선, 장기선, 고도계와 같은 수중 음향 센서의 성능에 의해 결정되는데 수중음향 신호는 다양한 형태의 노이즈를 가지고 있어 특별한 주의가 요망된다. 본 논문에서는 이동 관측창 개념을 이용한 실용적인 다중 센서 융합 알고리즘을 제안하였다. 해미래의 동해 실해역 시험을 통해 획득된 계측치에 본 알고리즘을 적용하여 그 성능을 고찰한 결과 우수한 성능을 보임을 알 수 있었다.

• 한국소음진동공학회논문집
• /
• 제26권1호
• /
• pp.89-96
• /
• 2016

TDOA(time delay of arrival) position estimate from acoustic measurement of artillery shell impact is studied in order to develop a targeting evaluation system. Impact position is calculated from the intersections of hyperbolic estimates based on the least square Taylor series method. The mathematical process of Taylor series estimation is known to be robust. However, the concern lays with the accuracy because it is sensitive to the bias caused by the randomness of measurement situation. The measurement error typically occurs from the distortion of waveform, change of travelling path, and sensor position error. For outdoor measurement, a consideration should be made on the atmospheric condition such as temperature and wind which can possibly change the trajectories of rays of sound. It produces wrong propagation time events accordingly. Ray tracing and optimization techniques are introduced in this study to minimize the bias induced by the ray of sound. The numerical simulation shows that the atmospheric correction improves the estimation accuracy.

• 대한자기공명의과학회:학술대회논문집
• /
• 대한자기공명의과학회 2003년도 제8차 학술대회 초록집
• /
• pp.103-105
• /
• 2003

After fifteen years of development, Magnetic Resonance (MR) technology for human imaging and spectroscopy is reaching a refined state with FDA approved 3T clinical products from Siemens, GE, and Philips. Broker has cleared CE approval with a 4T system. Varian supports a 4T system platform as well. Shielded magnets are standard at 3T from GE, Oxford, Magnex, and IGC. A shielded 4T whole body magnet is available from Oxford. Stronger switched gradients and dynamic shim coils, desired at any field, areespecially useful at higher static magnetic fields B0. In addition to the higher currents required for higher resolution slice or volume selection afforded by higher SNR, whole body gradient coils will be driven at increasing slew rates to meet the needs of new cardiac applications and other requirements. For example 3T and 4T systems are now being equipped with 2kV, 500A gradient coils and amplifiers capable of generating 4G/cm in 200msec, over a 67+/-cm bore diameter. High field EPI applications require oscillation rates at 1 kHz and higher. To achieve a benchmark 0.2 ppm shim over a 30cm sphere in a high field magnet, at least four stages of shimming need to be considered. 1) A good high field magnet will be built to a homogeneity spec. falling in the range of 100 to 150 ppm over this 30cm spherical "sweet spot" 2) Most modern high field magnets will also have superconducting shim coils capable of finding 1.5 ppm by their adjustment during system installation. 3) Passive ferro-magnetic shimming combined with 4) active, high order room temperature shim coils (as many as five orders are now being recommended) will accomplish 0.2 ppm over the 30cm sphere, and 0.1 ppm over a human brain in even the highest field magnets for human studies. Safety concerns for strong, fast gradients at any B0 field include acoustic noise and peripheral nerve stimulation. One or more of the mechanical decoupling methods may lead to quieter gradients. Patient positioning relative to asymmetric or short gradient coils may limit peripheral nerve stimulation at higher slew rates. Gradient designs combining a short coil for local speed and strength with a longer coil for coverage are being developed for 3T systems. Local gradients give another approach to maximizing performance over a limited region while keeping within the physiologically imposed dB0/dt performance limits.