• 센서학회지
• /
• 제10권2호
• /
• pp.142-147
• /
• 2001

인터디지털 표면음파 변환기의 교차장 모델에 기초한 전송선 등가회로를 사용하여 SPICE에 의한 SAW 필터의 효율적인 시뮬레이션 기법을 제안하였다. 표면음파의 전파를 전송선으로 모델하므로 인터디지털 변환기의 등가회로에서는 주파수 의존 회로소자가 필요하지 않게 된다. 그래서 주파수 의존 회로소자에 대한 등가회로를 근사적으로 구하지 않아도 되고, 필터의 등가회로에 작은 수의회로소자를 사용하므로 시뮬레이션 시간도 많이 단축된다. 삽입손실, 입력 어드미턴스, 통과대역 리플, 그리고 고조파 주파수 응답과 같은 SAW 필터 특성에 대한 시뮬레이션을 통하여 제안된 기법의 유용성을 보였다.

• 한국소음진동공학회논문집
• /
• 제23권6호
• /
• pp.563-573
• /
• 2013

The ship radiated noise level fluctuates by the interference between direct and reflected paths. The effect of sea surface reflection path on interference depends strongly on sea surface roughness. This paper describes error characteristics of ship acoustic signature estimation by sea surface scattering effect. The coherent reflection coefficient which explains a magnitude of sea surface scattering and its resultant interference acoustic field is analyzed quantitatively as a function of a grazing angle, effective surface height, frequency, source-receiver range and depths of source and receiver. Theoretical interference acoustic field is compared with experimental result for two different sea surfaces and five different frequencies by changing source-receiver range. It is found that both matches well each other and a magnitude of interference acoustic field is decreasing by increasing a grazing angle, effective surface height, frequency, and depths of source and receiver and decreasing source-receiver range. For given experimental conditions, the transmission anomaly which is a bias error of ship acoustic signature estimation, is about a range of 1~3 dB. The bias error of an existing ship radiated noise measurement system is also analyzed considering wind speed, source depth and frequency.

• 한국산학기술학회논문지
• /
• 제10권10호
• /
• pp.2557-2564
• /
• 2009

본 연구는 70톤 급 초대형 중장비에 사용되는 머플러를 실험과 경험 법칙을 통하여 개발하였다. 머플러 내부의 파티션 플레이트, 천공관 그리고 파이프 구조를 변경하며 투과손실 성능을 비교하고, 실험 결과를 통하여 머플러의 성능에 영향을 미치는 내부 음향 요소의 최적 조합과 배치를 결정하였다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2000년도 춘계학술대회논문집
• /
• pp.594-599
• /
• 2000

Two basic acoustic quantities, the characteristic impedances and the propagation constants, of the two different ultra lightweight concrete absorbers were examined with impedance tube method. A transmission loss was tested and compared with theoretical values. The results show that these kinds of sample have proper sound absorption and transmission loss capabilities. It means that they can be used in various fields where noise proof is needed.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2000년도 추계학술대회 논문집
• /
• pp.216-221
• /
• 2000

This paper deals with the Gain Control in the processing of the underwater acoustic image obtained from side scan sonar(SSS) system. At first, this paper describes the principles of SSS that is a surveying equipment for the underground of the rivers or dams as well as sea floor. Then this paper analyzes the cause and effects of the time varying intensity from the view point of transmission loss and beam pattern. At last, the time varying gain filter that is adopted by the towfish is introduced.

• 한국음향학회:학술대회논문집
• /
• 한국음향학회 2002년도 하계학술발표대회 논문집 제21권 1호
• /
• pp.403-406
• /
• 2002

휴대폰의 일반화와 이것의 음향변환기로 사용되는 초소형 스피커 (Micro-speaker) 수요의 증가에 따라 휴대폰의 다양한 기능 및 성능의 개발에 대한 초소형 스피커의 성능개선이 절실히 요구된다. 특히, 초소형 스피커에서 발생된 음의 명료도와 음의 방사효율에 관한 특성의 개선은 당면한 문제이다. 본 연구에서는 초소형 스피커 전면에 진동판 보호를 위해 부착되어 있는 전면 덮개(Front Cover)를 스피커의 명료도와 효율에 관련된 음향적 기구로서 고려하여 일반 휴대폰에 사용되고 있는 초소형 스피커들을 대상으로 전면덮개에 가공된 기공의 면적에 따른 음파의 투과손실을 측정하였다. 또한, 전면덮개와 초소형 스피커 진동판 사이에 존재하는 체적과 전면 덮개의 기공에 대한 음향 임피던스(Acoustic Impedance)를 이론적인 방법으로 구하여 이에 따른 투과손실(Transmission Loss) 및 공명특성을 예측하고 이를 스피커들에 대한 투과손실 측정 결과와 비교하였다. 본 연구의 결과는 초소형 스피커를 제조하는 기업들이 경험적인 방법을 벗어나, 이론적 근거를 바탕으로 제품설계를 수행하는데 기여할 것으로 사료된다.

• International Journal of Advanced Culture Technology
• /
• 제7권2호
• /
• pp.218-226
• /
• 2019

In modern society, people live in an environment with artificial or natural noise. Especially, the sound that corresponds to the artificial noise makes the noise itself and affects each other because many people live and work in the city. Sounds are generated by the activities and causes of various people, such as construction sites, aircraft, production machinery, or road traffic. These sounds are essential elements in human life and are recognized and judged by human auditory organs. Noise is a sound that you do not want to hear by subjective evaluation, and it is a loud sound that gives hearing damage or a sound that causes physical and mental harm. In this study, we introduce the method of stimulating the human hearing by finger vibration and explain the advantages of the proposed method in various kinds of a noise environment. And how to improve the sound quality to improve efficiency. In this paper, we propose a method to prevent the loss of hearing loss and the transmission of sound information based on proper signal to noise ratio when using portable IT equipment in various noise environments.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회B
• /
• pp.2913-2917
• /
• 2007

Turbocharger has been widely used in many passenger cars in application with diesel engines because of high power and fuel efficiency. However, flow-induced noise (whoosh or hissing noise) which is generated within the compressor during its operation at marginal surge line can deteriorate noise characteristics. Hissing noise excitation was associated with the generation of turbulence within the turbocharger compressor and radiated through the transmission path in turbocharger system. In this study, a sharp-edged reactive-type muffler was devised and installed in the transmission path to reduce the hissing noise. Acoustic and fluid dynamic characteristics for the muffler were investigated which is related to the unsteadiness of turbulence and pressure in turbocharger system. A transfer matrix method was used to analyze the transmission loss of the muffler. Simple expansion muffler with extended tube of the reactive type is proposed for the reduction of high frequency component noise. Turbulence computation was carried out by a standard ${\kappa}-{\varepsilon}$ model. An optimal design condition of the muffler was obtained by extensive acoustic and fluid dynamic analysis on the engine dynamometer with anechoic chamber. A significant reduction of the hissing noise was achieved at the optimal design of the muffler as compared with the conventional turbocharger system.

• 대한기계학회논문집B
• /
• 제33권2호
• /
• pp.79-84
• /
• 2009

Turbocharger has been widely used in many passenger cars in application with diesel engines because of high power and fuel efficiency. However, flow-induced noise (whoosh or hissing noise) which is generated within a compressor during its operation at marginal surge line can deteriorate noise characteristics. Hissing noise excitation is associated with the generation of turbulence within the turbocharger compressor and radiated through the transmission path in a turbocharger system. In this study, a expansion muffler with lids is devised and installed in the transmission path to reduce the hissing noise. Acoustic and fluid dynamic characteristics for the muffler are investigated which are related to the unsteadiness of turbulence and pressure in the turbocharger system. A transfer matrix method is used to analyze the transmission loss of the muffler. A simple expansion muffler with lids is proposed for the reduction of high frequency component noise. Turbulence simulation is carried out by a standard k - ${\varepsilon}$ model. An optimal design condition of the muffler is obtained by extensive acoustic and fluid dynamic analysis on the engine dynamometer with anechoic chamber. A significant reduction of the hissing noise is achieved at the optimal design of the muffler as compared with the conventional muffler.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2000년도 춘계학술대회논문집
• /
• pp.1767-1771
• /
• 2000

We report the number of calibration and test for acoustic field which were conducted in KRISS between the year of 1990 and 1999. The items contain sound level meter and calibrator for calibration and sound absorption coefficient, transmission loss, sound pressure level of siren, sound pressure level and power of acoustic instrument and relative accessories for test. The data show that the number of them have been increased continuously.