• International Journal of Computer Science & Network Security
• /
• 제23권1호
• /
• pp.96-102
• /
• 2023

In this paper, we proposed Channel Transfer Function estimation based on Delay and Doppler Profile for underwater acoustic OFDM communication system. It improved the estimation accuracy of the channel transfer function by linear time interpolation the change of Scattered Pilot (SP) insertion frequency in the time direction and the time by Delay and Doppler profile that analyzes the multipath situation of the channel investigated the performance of interpolation by simulation and report it. Previous works is inserted SP every 4 OFDM. It was effective under the environment without multipath, but it has observed that the effect of CTF compensation has been lowered in multipath channel condition. In addition to be better when inserted SP every 2 OFDM. But the amount of sending data will be decrease. Therefore, we conducted research to improve 4 OFDM with new interpolator. A computer simulation was performed as a comparison of SP inserted every 4 OFDM, SP inserted every 2 OFDM, and 4 OFDM with new interpolator. the performance of the proposed system is overwhelmingly improved, and the performance is slightly improved even 64 QAM.

• Nuclear Engineering and Technology
• /
• 제33권2호
• /
• pp.145-155
• /
• 2001

This simulation first allows us to define a transition zone from a bubble to jet mode of the argon out-flow and hereinafter to define a similar area for water-steam leak in the KALIMER SG (Korea Advanced Liquid Metal Reactor Steam Generator) using a water mock-up system, taking into account the KALIMER leak classification and tube bundle design, as a simulation of a real water-steam into sodium leak. in accordance with leak conditions in the KALIMER SG, the transition from bubbling to jetting is studied by means of turbulence regime simulation for argon out-flow through a very small orifice, which has the equivalent diameter of about 0.253 mm. finally the noise generation mechanism is explained from the existing experimental data. We also confirmed the possibility of micro-leak detection from the information of the bubbling mode through simulations and the experiment in this study.

• 설비공학논문집
• /
• 제23권8호
• /
• pp.549-555
• /
• 2011

For a $CO_2$ one-stage twin rotary compressor, a T-shaped suction port was used to effectively supply the suction gas stream into two individual suction chambers of the twin cylinders. Suction gas pulsations were observed in the pressure sensor signals and these were simulated by using the acoustic modeling of Helmholz resonators in parallel. The module of acoustic modeling was combined to a computer simulation program for the compressor performance. Validation of the simulation program has been carried out for a bench model compressor in a compressor calorimeter. Cooling capacity and the compressor input power were reasonably well compared between the simulation and the calorimeter test. Particularly, good agreement on P-V diagram between the simulation and the test was obtained.

• Structural Monitoring and Maintenance
• /
• 제9권3호
• /
• pp.237-258
• /
• 2022

This paper studies detecting and locating loose bolts using nonlinear guided waves. The 3D Finite Element (FE) simulation is used for the prediction of guided waves' interactions with loose bolted joints. The numerical results are verified by experimentally obtained data. The study considers bolted joints consisting of two bolts. It is shown that the guided waves' interaction with surfaces of a loose bolted joint generates Contact Acoustic Nonlinearity (CAN). The study uses CAN for detecting and locating loose bolts. The processed experimentally obtained data show that the CAN is able to successfully detect and locate loose bolted joints. A 3D FE simulation scheme is developed and validated by experimentally obtained data. It is shown that FE can predict the propagation of guided waves in loose bolts and is also able to detect and locate them. Several numerical case studies with various bolt sizes are created and studied using the validated 3D FE simulation approach. It is shown that the FE simulation modeling approach and the signal processing scheme used in the current study are able to detect and locate the loose bolts in imperfect bolted joints. The outcomes of this research can provide better insights into understanding the interaction of guided waves with loose bolts. The results can also enhance the maintenance and repair of imperfect joints using the nonlinear guided waves technique.

• 한국음향학회지
• /
• 제21권8호
• /
• pp.744-756
• /
• 2002

현재 복부용 초음파 진단장치에 가장 일반적으로 사용되고 있는 3.5 ㎒의 굴곡형 선형배열 (curved linear array) 탐촉자가 인체 중에 만드는 과도음장을 체계적으로 해석함으로써, 음장의 측면에서 보다 우수한 초음파 영상이 기대되는 탐촉자의 설계 파라메터를 도출하고자 시도하였다. 음장해석에 있어서는 방사파형을 일정하게 가정한 상태에서 탐촉자 요소의 크기, 곡률 반경, 개구내 압전소자에 대한 구동신호의 진폭 가중치 적용 등의 파라메터를 음장 형성의 지배적인 요소로서 고려하였다. 시뮬레이션의 결과, 탐촉자의 곡률 반경 및 개구높이를 줄이고 해밍 (Hamming) 창 형태의 진폭 가중치 적용을 실시함으로써 기존의 전형적인 탐촉자보다 부엽 (side lobe)의 영향이 적은 우수한 초음파 빔을 형성하는 새로운 탐촉자의 설계 파라메터가 얻어졌다.

• 대한기계학회논문집
• /
• 제19권4호
• /
• pp.950-967
• /
• 1995

Acoustic holography makes it possible to reconstruct the acoustic field based on the measurement of the pressure distribution on the hologram surface. Because of the merit that one can obtain an entire three-dimensional wave field from the data recorded on a two-dimensional surface, the holographic method has been widely studied. Being an experimental method, holography has an unavoidable error which is generate by sampling in space and frequency domain and finite aperture size. Its magnitude is dependent on the space and frequency domain and finite aperture size. Its magnitude is dependent on the shape of hologram surface, acoustic holography may be classified into four types of holography : rectangular type planeholography, circular type plane holography, cylindrical holography and spherical holography. In this paper, four types of holography are studied by modal summation method. Numerical simulation is performed using a monopole source with varying parameters to find out effects to the estimation error in each holography. Experiments of circular type plane holography and cylindrical holography explain strong relation between the shape of hologram surface and the acoustic field.

• 한국정보전자통신기술학회논문지
• /
• 제6권1호
• /
• pp.29-36
• /
• 2013

심벌 간 간섭은 천해 수중 음향 채널에서 신뢰성 있는 고속 데이터 통신을 방해하는 주된 장해 요인 중의 하나이다. 이 논문은 수중 음향 통신 시스템에서 심벌 간 간섭을 완화시키기 위한 방법으로서 사용되는 적응 등화기의 시뮬레이션에 대하여 연구한다. 수중 채널은 다중 경로의 중첩으로 모델링하는데, 각 경로의 길이와 상대적 지연은 채널 기하로부터 계산된다. 이 채널 모델을 기반으로 컴퓨터 시뮬레이션을 수행하여 천해 수중 음향 채널에서 적응 등화기의 성능을 탐구한다.

• 한국음향학회지
• /
• 제34권3호
• /
• pp.177-183
• /
• 2015

본 논문은 음성 통신 환경에서 스피커 모듈 비선형 특성 모델링과 긴 음향 반향 경로에서 효율적으로 동작하는 강인한 비선형 음향 반향 제거기를 제안한다. 제안하는 비선형 음향 반향 제거기는 sigmoid 전처리기를 사용하여 스피커 모듈의 비선형 특성을 모델링하며, 적은 시간 지연으로 긴 음향 반향 경로를 추정할 수 있도록 파티션 블록 주파수 영역 적응 필터를 사용한다. 실험을 통해 스피커 모듈의 비선형 특성이 발생하는 환경에서 제안 비선형 음향 반향 제거기는 기존 비선형 음향 반향 제거기에 비해 적은 연산량으로 우수한 성능을 보임을 확인하였다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 춘계학술대회논문집
• /
• pp.731-739
• /
• 2002

recently out door stadiums have been built as multi purpose stadium for athletic sports It hold but also various events and huge concerts. in the past, out-door stadium usually was built, but recently the out-door stadium which of the 50 ％ of roof covered by doom have been built increasingly. as the result, the sound obstacle is becoming very important. but a design of sound has become unplaned except some of the stadium, also rarely been built by sound-absorption material. as the result, the purpose of this study is investigating, analyzing the theory for plan of electric acoustic sound, a drawing of acoustic design and measurement a result value, comparison, evaluating a main sound factor with criteria of the Seoul City design. and reservation time, clearness, sound pressure level suitable for using purpose, so the necessary quantities will be added to financial budget of building acoustic design. and For verification, this contains acoustic analyser measurement and computer simulation and this study will find the solution of helping method.

• 한국음향학회지
• /
• 제24권8호
• /
• pp.454-461
• /
• 2005

수중음향채널의 다중경로에 의한 수신신호의 지연확산은 ISI (Inter-Symbol Interference)를 유발하여 수중음향 통신시스템의 성능을 저하시킨다. 본 연구에서 적용하는 수동 페이저 컨쥬게이션 기법은 신호대 다중경로 간섭 신호비를 크게 하여 다중경로에 의한 주파수 선택성을 경감시켜 ISI를 줄이는 다이버시티 통신기법이다. 신호 대 다중경로 간섭신호비의 개선과 이에 따른 주파수 선택성은 수동 페이저 컨쥬게이션에 적용하는 수신기 배열의 배열 센서 개수, 송수신기의 상대운동에 의해 좌우되며, 따라서 비트 오류특성이 결정된다. 본 연구에서는 이들의 특성을 수치모의 실험으로 해석하였다.