• 한국멀티미디어학회논문지
• /
• 제2권1호
• /
• pp.99-108
• /
• 1999

본 논문에서는 계산량이 크게 증가하지 않으면서 음향 반향 제거기의 성능을 향상시키는 잡음에 강건한 알고리즘을 제안한다. 제안하는 알고리즘은 NLMS 알고리즘을 기반으로 적응 상수를 기준 입력신호와 마이크 입력신호의 전력합으로 정규화한다. 마이크 입력으로 근단화자의음성신호와 잡음이 입력되면 그 전력만큼 적응 상수가 작아지기 때문에 이들 주변 잡음신호에 의한 계수 오조정을 줄일 수있다. 따라서 제안하는 알고리즘은 동시통화와 주변 잡음이 있는 상황에서 반향 제거 기능을 잘 수행한다. 제안하는 알고리즘의 수렴 속도는 반향 신호가 10~20 dBSPL 정도 감쇠되기 때문에 NLMS 알고리즘에 비해서 크게 느려지지 않는다. 본 논문에서는 제안하는 알고리즘의 성능을 분석하고 기존의 알고리즘과 비교한다.

• Journal of Power Electronics
• /
• 제10권5호
• /
• pp.451-460
• /
• 2010

This paper presents a new kind of digital control metal halide lamp electronic ballast. A zero-voltage-switch quasi-square-wave (ZVS-QSW) dual Buck converter is adopted here. In this paper, a digital control method is proposed to achieve ZVS for the converter. This ZVS can be realized during the whole working condition. Single-cycle-peak-current control is proposed to solve the problem of excessive inductor current during a low-frequency reversal transient. Power loop control is also realized and its consistency for different lamps is good. An AVR special microcontroller for a HID ballast is used to raise the control performance, and the low-frequency square-wave control method is adopted to avoid acoustic resonance. A 70W prototype was built in the laboratory. Experimental results show that the electronic ballast works reliably. Furthermore, the efficiency of the ballast can be higher than 92%.

• 정보처리학회논문지A
• /
• 제10A권6호
• /
• pp.737-748
• /
• 2003

디지털 음악 컨텐츠의 활용이 보편화되고 음악 데이터의 양이 방대해지면서 데이터베이스로부터 음악 컨텐츠를 효과적으로 질의하고 검색하는 기능이 절실해졌다. 본 논문에서는 사용자들이 자주 질의하는 멜로디 부분을 이용하여 음악 검색을 보다 빠르고 효과적으로 수행할 수 있는 음악 검색 시스템인 FMF(Fast Melody Finder)를 제안한다. 이 기법은 어떤 음악에 대해 사용자가 기억하고 질의하는 내용이 대개 음악의 특정 선율에 한정되어 있다는 사실에 기반하고 있으며, 사용자의 이러한 질의 패턴을 이용하여 자주 질의되는 부분을 인덱스로 사용함으로써 사용자가 원하는 곡을 빠르게 찾아낼 수 있게 해준다. 또한 이러한 선율들을 다루기 위해서, 사용자의 허밍에 의한 음향 질의와 오선지를 통한 질의로부터 추출된 음높이와 음의 길이를 분석하여 UDR과 LSR 스트링으로 변환함으로써 더욱 정확한 질의를 할 수 있다. 프로토타입 시스템을 구현하고 다양한 실험을 통하여 논문에서 제안하는 기법의 우수성을 보인다.

• Ocean and Polar Research
• /
• 제22권2호
• /
• pp.57-67
• /
• 2000

Time-selective self-triggering water sampler, AUTTLE developed by Jin et al. (1999) has been improved in order to prevent pre-deposition of suspended sediments (SS) before sampling. By using two solenoids, the improved sampler is able to be moored or deployed with inclination. Its position is changed to horizontal position by activating the first solenoid, and then the endcaps of the sampling bottle are closed by the second solenoid that is driven three times to minimize possible failure of sampling. An external control unit for setting sampling time has been also constructed. Additionally, the electric circuit housing of the sampler has been modified to be detached from the sampling bottle when operating manually. Its performance has been confirmed through flume tests and a field experiment. It will serve as a valuable tool in the various fields of oceanography and environmental engineering, especially where seawater sampling synchronized at several sites and/or the information in storm period is important.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2001년도 춘계 학술대회논문집
• /
• pp.189-194
• /
• 2001

In this paper, non-reacting and reacting flowfields were computed using a preconditioned Navier-Stokes solver. The preconditioning technique of Merkle et al. and TVD scheme or Chakravarthy and Osher was employed and the results obtained using developed code have a good agreement with the previous results and experimental data. The preconditioned Wavier-Stokes equation set with low Reynolds number $\kappa-\epsilon$ equation and species continuity equations, are discretized with strongly implicit manner and time integrated with LU-SSOR scheme. For the purpose of treating unsteady problem the duel-time stepping scheme was employed. For the validation of the code in incompressible flow regime, steady driven square cavity flow was considered and calculation result shows reasonably good agreement with the result of incompressible code. Shock wave/boundary layer interaction problem was considered to show the shock capturing performance of preconditioned-TVD scheme. To validate unsteady flow, acoustic oscillation problem was calculated, and supersonic premix flame of $H_2$-air reaction problem which is calculated with turbulence model, 9-species/18-reaction step reaction model, shows reasonable agreement with the previous results. As a result, the preconditioning method has an advantage to calculate incompressible and compressible flow through one code and preconditioned solver easily developed from standard compressible code with minor efforts. But additional computational time and computer memory is required due to preconditioning matrix.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2007년도 춘계학술대회
• /
• pp.395-399
• /
• 2007

Renewable energy sources such as wind energy is copiously available without any limitation. Wind turbines are used to tap the potential of wind energy which is available in millions of megawatt. Reliability of wind turbine is critical to extract this maximum amount of energy from the wind. We reviewed different techniques, methodologies, and algorithms developed to monitor the performance of wind turbine as well as for an early fault detection to keep away the wind turbines from catastrophic conditions due to sudden breakdowns. To keep the wind turbine in operation, implementation of Condition Monitoring System (CMS) is paramount, and for this purpose ample knowledge of these types of system is mandatory. So, an attempt has been made in this direction to review maximum approaches related to CMS in this piece of writing.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2007년도 춘계학술대회논문집
• /
• pp.81-84
• /
• 2007

In this paper, fiber optic sound and vibration monitoring sensor which is latticed shape structure based on Sagnac interferometer is fabricated and tested in laboratory conditions. To detect external vibrations surface mounted fibers on the latticed steel wire fence with a dimension of 170cm by 180cm is used. To detect external sound frequency the tightened fiber optic itself wire netting fence with a dimension of 50cm by 50cm is used. Experiments for the detection of the excited vibration and sound signals were performed. A small vibrator induced external vibration signal and it is applied to the latticed structure in the range of 100Hz to several kHz. External sound signal applied to the fiber optic sensor net using non-directional sound speaker. The detected optical signals were compared and analyzed to the detected both accelerometer and microphone signals in the time and frequency domain. Based on the experimental results, distributed fiber optic sensor using Sagnac interferometer detected effectively external vibration and sound signal and had a good performance. This system can be expanded to the monitoring of a significant system and to the structural health monitoring system.

• 한국콘텐츠학회논문지
• /
• 제13권3호
• /
• pp.1-8
• /
• 2013

본 논문에서는 한국어에서 유아 대상의 음성인식 향상을 위한 새로운 특징추출 알고리즘을 제안한다. 제안하는 특징추출 알고리즘은 세 가지 방법을 통합한 기법이다. 첫째 성도의 길이가 성인에 비해 짧은 유아의 음향적 특징을 보완하기 위한 방법으로 성도정규화 방법을 사용한다. 둘째 성인의 음성과 비교했을 때 높은 스펙트럼 영역에 집중되어 있는 유아의 음향적 특징을 보완하기 위해 균일한 대역폭을 사용하는 방법이다. 마지막으로 실시간 환경에서의 잡음에 강건한 음성인식기 개발을 위해 스무딩 필터를 사용하여 보완하는 방법이다. 세 가지 방법을 통해 제안하는 특징추출 기법은 실험을 통해 유아의 음성인식 성능 향상에 도움을 준다는 것을 확인했다.

• International Journal of Aeronautical and Space Sciences
• /
• 제18권1호
• /
• pp.144-153
• /
• 2017

In recent years, unmanned aerial vehicles (UAVs) have been developed and studied for various applications, including drone deliveries, broadcasting, scouting, crop dusting, and firefighting. To enable the wide use of UAVs, their exact aeroacoustic characteristics must be assessed. In this study, a noise prediction method for a ducted fan UAV with complicated geometry was developed. In general, calculation efficiency is increased by simulating a ducted fan UAV without the struts that fix the fuselage to the ducts. However, numerical predictions of noise and aerodynamics differ according to whether struts are present. In terms of aerodynamic performance, the total thrust with and without struts is similar owing to the tendency of the thrust of a blade to offset the drag of the struts. However, in aeroacoustic simulations, the strut effect should be considered in order to predict the UAV's noise because noise from the blades can be changed by the strut effect. Modelling of the strut effect revealed that the dominant tonal noises were closely correlated with the blade passage frequency of the experimental results. Based on the successful detection of noise sources from a ducted fan UAV system, using the proposed noise contribution contour, methods for noise reduction can be suggested by comparing numerical results with measured noise profiles.

• Smart Structures and Systems
• /
• 제1권1호
• /
• pp.63-82
• /
• 2005

This paper introduces a technology for robust and low maintenance cost sensor network capable to detect accelerations below a micro-g in a wide frequency bandwidth (above 1,000 Hz). Sensor networks with such performance are critical for navigation, seismology, acoustic sensing, and for the health monitoring of civil structures. The approach is based on the fabrication of an array of high sensitivity accelerometers, each utilizing Fabry-Perot cavity with wavelength-dependent reflectivity to allow embedded optical detection and serialization. The unique feature of the approach is that no local power source is required for each individual sensor. Instead one global light source is used, providing an input optical signal which propagates through an optical fiber network from sensor-to-sensor. The information from each sensor is embedded onto the transmitted light as an intrinsic wavelength division multiplexed signal. This optical "rainbow" of data is then assessed providing real-time sensing information from each sensor node in the network. This paper introduces the Fabry-Perot based accelerometer and examines its critical features, including the effects of imperfections and resolution estimates. It then presents serialization techniques for the creation of systems of arrayed sensors and examines the effects of serialization on sensor response. Finally, a fabrication process is proposed to create test structures for the critical components of the device, which are dynamically characterized.