• Journal of the Korean Society for Precision Engineering
• /
• v.18 no.5
• /
• pp.34-41
• /
• 2001

More accurate and fast inspection method for mechanical parts and structure is required to guarantee the safety. Conventional methods using compliance method, eddy current method, ultrasonic wave, acoustic emission for non-destructive testing in mechanical parts and structure have been performed as the method of contact with objects to be inspected. With this reason these methods have been taken relatively much time, money, and manpower. In this study, in order to overcome these shortcomings, we used In-plane Electronic Speckle pattern Interferometry(In-plane ESPI) that was full-field measurement and noncontact method. We detected the cracks of the specimen at a real time and measured the length of the crack by using In-place ESPI system. Finally, we compared this results with conventional microscope method.

• Proceedings of the Acoustical Society of Korea Conference
• /
• 1994.06a
• /
• pp.867-872
• /
• 1994

The transfer function of an acoustic system, in general, often exhibits a wide dynamic range and a very long impulse response. The time-stretched pulse (TSP) proposed by Aoshima (ATSP) has a small peak-factor and is accordingly suitable for the measuring impulse responses. The pulse is not so suitable, however, for the measurement of impulse responses over a wide frequency range. In this paper, we try to generalize and optimize this method (OATSP). This makes the method applicable for measuring of impulse responses longer than the length of the TSP. An analysis of error in such a case is also shown. Finally, we discuss how to implement this technique in specific measurement conditins.

• Transactions of Materials Processing
• /
• v.18 no.2
• /
• pp.144-149
• /
• 2009

Recently, the monitoring technology of machining process is very important to improve productivity and quality in manufacturing filed. Such monitoring technology has been performed to measurement using vibration signal, acoustic emission signal and tool dynamometer. However, micro machining is limited small-scale parts machining because micro tool is very small and weakness to generate signal in micro machining process. Therefore, this study has efficient sensing technology for real monitoring system in micro machine that is proposed to supplement a disadvantage of single-sensor by multi sensor. From experimental result, it was evaluated tool wear and cutting situation according to repetitive slot cutting condition and changing cutting condition, and it was performed monitoring spindle rpm and condition according to compare acceleration signal with current signal.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.31B no.1
• /
• pp.23-33
• /
• 1994

In this paper, we propose a probabilistic model appropriate for the bearing estimator which uses cross-correlation method following a close investigation on real underwater acoustic bearing data. The well-known JPDA(Joint Probabilistic Data Association) filter is tuned to the underwater acoustic bearing estimation based on the result that the reliability of the bearing measurement is related to the amplitude of the cross-correlation peak. The proposed probabilistic model is shown to be adequate by presenting the results of the improved tracking performance of the modified filter for various real bearing data as well as artificially generated ones.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• v.15 no.1
• /
• pp.20-26
• /
• 2015

It is very difficult to design an underwater communication system because of multipath, Doppler effects, noise, and attenuation. These factors lead to errors in the communication performance and maximum propagation distance. In this study, we calculate the distance that can be realized using the direct-sequence code division multiple access (DS-CDMA) technique with direct-sequence spread spectrum (DSSS) in an underwater communication system considering only the attenuation and noise. We also compare the estimated and calculated propagation distances obtained for several different scenarios.

• Journal of Mechanical Science and Technology
• /
• v.17 no.4
• /
• pp.511-520
• /
• 2003

In room acoustics, reverberation time is an important acoustic parameter. However it is often difficult to measure short reverberation times at low frequencies with a traditional band pass filter bank if the product of filter bandwidth (B) and reverberation time (T) is small. It it well known that the minimum permissible product of bandwidth and reverberation time of the traditional band pass filter is at least 16. This strict requirement makes it difficult to measure short reverberation times of an acoustic room at low frequencies exactly. In order to reduce this strict requirement, in the previous paper, the wavelet filter bank was developed and the minimum permissible product of bandwidth and reverberation time was replaced with 4. In the present paper it is demonstrated how the short reverberation times of an practical room at low frequencies are successfully measured by using the wavelet filter bank and the results are compared with the traditional method using a band past filer bank.

• 한국신재생에너지학회:학술대회논문집
• /
• 2009.06a
• /
• pp.508-511
• /
• 2009

풍력터빈 블레이드에서 발생하는 공력소음원의 위치 특성을 파악하기 위해 마이크로폰 어레이를 사용하여 소음원 풍동시험을 수행하였다. 풍동시험은 KARI 중형 아음속풍동에서 수행되었으며, 소음원의 위치파악을 위해 시간영역 회전체 빔포밍기법을 사용하였다. 기존 시간영역 회전체 빔포밍 기법의 경우 시험데이터 해석에 많은 시간이 소요되나, 본 논문에서는 원통형 좌표계에서 회전각 격자간격과 해석기간 간격 사이의 상관조건을 도입하여 데이터 해석시간을 기존 방법 대비 1/5로 단축하였다. 시험결과 나타난 주파수에 따른 블레이드 공력소음원의 위치 특성은 2kHz 이하 대역에서는 블레이드 반경 80% 부근에 주소음원이 위치하며, 4kHz 이상 대역에서는 블레이드 끝단 부근에 주 소음원이 위치하고 있다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.5 no.7
• /
• pp.1321-1325
• /
• 2001

In this article, piezoelectric films and their application for film bulk acoustic resonator (FBAR) devices are presented. The FBAR is composed of piezoelectric film sandwiched between top and bottom electrodes and an acoustic reflector of SiO2/W stacked multilayers. Various FBAR devices were fabricated and evaluated through simulation and measurement. The insertion loss, return loss and Q-factor were observed to be reasonably high and good. The FBAR technology seems very promising particularly for RF band filter application.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1998.11a
• /
• pp.199-202
• /
• 1998

Power capacitors are highly reliable equipment due to their completely enclosed configuration. Aging diagnosis system using partial discharge(PD) and acoustic emission(AE) is being highlighted as a research area for degradation of power capacitors. Their dielectric strength can be however reduced due to some stresses such as over-voltage or thermal degradation of the insulation material during their long period of operation. In this paper, it has been developed to express the AE of the EVENT(average amplitude) and HIT(pulse count) according to the source location. And real time measurement of PD signals for aging diagnosis of power capacitors.

• The Bulletin of The Korean Astronomical Society
• /
• v.42 no.2
• /
• pp.54.2-54.2
• /
• 2017

While quasars are sparse in number density, they reside at relatively high-redshift as compared to e.g. luminous red galaxies. Hence, they are likely to be less non-linearly evolved than the galaxy population, and thus have a distribution that more closely mirrors the primordial density field. Therefore, they offer an intriguing opportunity to search for Baryonic Acoustic Oscillations (BAO). To this end, the 3-point correlation function (3PCF) is an excellent statistical tool to detect BAO. In this work, we will make the first-ever measurement of the large-scale quasar 3PCF from the SDSS-IV DR14 quasar sample (spanning the largest volume to-date). This work will use the order N2-time 3PCF algorithmof Slepian & Eisenstein (2015), with N the number of objects.