• 수산해양기술연구
• /
• 제23권2호
• /
• pp.34-34
• /
• 1987

이종재 마찰용접재 강도특성과 초음파 반사계수와의 상관성에 관하여 실험적으로 연구한 결과의 요약은 다음과 같다. 1. 이종재 마찰용접 이음면에서의 초음파 반사계수를 펄스반사법에 의하여 측정산출할 수 있다. 2. 5MHz의 비교적 낮은 주파수의 탐촉자를 사용하므로써 시험편의 표면가공 오차를 무시할 수 있다. 3. 알루미늄과 스테인레스의 마찰용접에서는 용접조건으로 마찰가열시간이나 가열압력을 변수로 하였을 때보다 업셋가압력을 변수로 하였을 때 반사계수의 변화가 뚜렷하다. 4. 업셋가압력을 변수로 한 용접조건과 반사계수사이에는 선형적 상관관계가 있다. 5. 용접이음면에서의 이음인장강도와 반사계수와의 상관관계식을 정량적으로 도출할 수 있다. 6. 초음파 반사계수에 의해 이종재 마찰용접 품질의 비파괴적 평가가 가능하다

• 수산해양기술연구
• /
• 제23권2호
• /
• pp.80-85
• /
• 1987

이종재 마찰용접재 강도특성과 초음파 반사계수와의 상관성에 관하여 실험적으로 연구한 결과의 요약은 다음과 같다. 1. 이종재 마찰용접 이음면에서의 초음파 반사계수를 펄스반사법에 의하여 측정산출할 수 있다. 2. 5MHz의 비교적 낮은 주파수의 탐촉자를 사용하므로써 시험편의 표면가공 오차를 무시할 수 있다. 3. 알루미늄과 스테인레스의 마찰용접에서는 용접조건으로 마찰가열시간이나 가열압력을 변수로 하였을 때보다 업셋가압력을 변수로 하였을 때 반사계수의 변화가 뚜렷하다. 4. 업셋가압력을 변수로 한 용접조건과 반사계수사이에는 선형적 상관관계가 있다. 5. 용접이음면에서의 이음인장강도와 반사계수와의 상관관계식을 정량적으로 도출할 수 있다. 6. 초음파 반사계수에 의해 이종재 마찰용접 품질의 비파괴적 평가가 가능하다

• Journal of Ecology and Environment
• /
• 제34권2호
• /
• pp.167-174
• /
• 2011

Black-billed magpies (Pica pica) are a highly sedentary species due to their short and round wings, which are not adequate for long distance flights. We investigated geographic variation in the vocal signals of magpies residing in South Korea and Japan (subspecies sericea). Based on the magpie's limited dispersal ability, we predicted that the variation in vocal signals of black-billed magpies could be explained by geographic barriers such as mountain ranges and straits. We analyzed four-syllable chatter calls of magpies from five localities in South Korea, which are separated by mountain ranges (Seoul, Daejeon, Daegu, Gwangju, and Busan), and two island localities separated from the mainland by straits (Jeju in Korea and Saga in Japan). We found significant differences in the characteristics of magpie chatter calls recorded in the seven localities, and the variation pattern was independent among the variables. Mainland-island differentiation and north-south differentiation were observed. In general, magpies on Saga were the most distinctive. North-south differentiation was observed among the Korean mainland localities. However, the pattern was not related to the presence of putative geographic barriers. We hypothesize that the patterns of geographic variation in the structure of magpie chatter calls residing in South Korea might have been shaped by a sudden expansion of magpies followed by low level of local isolation, which may have led to vocal differentiation. Along with elucidating the vocal environment of Korean magpie populations, more extensive sampling is needed to clarify the functional aspects of geographic variation in the vocal signals of Korean magpies.

• 대한후두음성언어의학회지
• /
• 제17권1호
• /
• pp.43-48
• /
• 2006

Background and Objectives: Countertenors who can produce higher vocal pitch like female classical singer's voice and use both modal and falsetto register. This study was conducted to study phonatory characteristics between modal and falsetto register of the countertenor. Materials and Methods: A male countertenor who had 8 years of experience was examined using a videostroboscopy and his voice was analyzed using aerodynamic measures; fundamental frequency(F0), Mean air flow rate(MFR), intensity(SLP), subglottal air pressure(Psub) with phonatory function analyzer(Nagashima) and acoustic measures; jitter, shimmer, HNR, closed quotient(CQ) using a Electro-glottography(EGG) of Lx. Speech Studio(Laryngoscope, Ltd, UK) and voice range profile of CSL(Kay elemetrics). Results: In the stroboscopy finding, the longitudinal length of vocal folds was increased at the falsetto register and the upper margin of vocal folds vibrated with incomplete closure of true vocal folds. In aerodynamic analysis, intensity was same at the modal and falsetto register. However, MFR, Psub, MPT were higher at the falsetto register. In the electroglottographic analysis, closed quotient(CQ) at the modal register was high and also much higher at the high-pitch falsetto than at the loud falsetto. In the VRP, intensity was similar though F0 was different between modal and falsetto register. Conclusion: It implied that countertenor could produce powerful voice quality by increasing of respiratory pressure and respiratory volume though glottal closure was incomplete. In addition, no change of EGG waveform, similar voice range with alto was observed.

• 비파괴검사학회지
• /
• 제14권1호
• /
• pp.23-31
• /
• 1994

재회의 초음파 감쇠가 유체속의 원형관으로부터의 공명 산란 특성에 미치는 영향을 분석하였다. 이를 위하여, 실수 파수 대신에 복소수의 허수부가 초음파 감쇠를 나타내는 복소수 파수(complex wave numbers)를 도입하였다. 유체가 들어있는 원형관에 대해 재료의 감쇠를 고려했을 때, 연속 평면파에 의한 물속에서의 공명 산란 특성을 분석하는 수치 해석 프로그램을 완성하였다. 프로그램의 타당성을 검증하기 위하여 감쇠를 무시한 경우의 수치 해석 결과를 기 보고된 수치 해석 결과와 비교하였다. 알루미늄 및 아크릴 원형관의 감쇠가 이들 원형관의 산란 특성에 미치는 영향을 해석한 결과, 공명피크의 폭이 좁고 예리할수록, 또한 $k_{1{\alpha}}$가 클수록 감쇠의 영향이 뚜렷하였다. 원형관의 공명 산란 특성이 초음파 감쇠에 크게 좌우되었다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 춘계학술대회 논문집
• /
• pp.1223-1227
• /
• 2005

Fine microgroove is the key component to fabricate micro-grating, micro-grating lens and so on. Conventional groove fabrication methods such as etching and lithography have some problems in efficiency and surface integrity. This study deals with the creation of ultra-precision micro grooves using non-rotational diamond tool and CNC machining center. The shaping type machining method proposed in the study allows to produce V-shaped grooves of $40\mu{m}$ in depth with enough dimensional accuracy and surface. For the analysis of machining characteristics in micro V-grooving, three components of cutting forces and AE signal are measured and processed. Experimental results showed that large amplitude of cutting forces and AE appeared at the beginning of every cutting path, and cutting forces had a linear relation with the cross-sectional area of uncut chip thickness. From the results of this study, proposed micro V-grooving technique could be successfully applied to forming the precise optical parts like prism patterns on light guide panel of TFT-LCD.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2009년도 학술발표회 초록집
• /
• pp.415-420
• /
• 2009

공학 분야에 있어서 수치 해석적 연구가 많은 주목을 받고 있다. 경제적 측면을 비롯한 다양한 측면에 있어서 모의의 간편성으로 인해 하천에서의 수리학적 거동모의에 수치해석 모의 분석법이 쓰이고 있는데 모의결과의 비교 및 검증을 위해서는 현장 실험 혹은 모형실험이 선행되어야만 한다. 본 연구에서는 강재로 제작된 S자 형태의 만곡부를 두 개 갖고 있는 사행수로 실험 장치를 제작하여 두 가지 유량조건 (30, 60 ${\ell}$/sec.)과 두 가지 하류단 수위조건 (30, 40 cm)에 대하여 수평 2차원 유속분포 자료를 이용하였다. 유속장의 자료는 Sontek사에의 3차원 micro-ADV(Acoustic Doppler Velocimeter)를 이용하여 측정하였다. 주 흐름은 직선구간에서는 중앙에서 최대 유속을 나타내며, 좌우대칭적인 유속분포의 모습을 보이고, 만곡부에서는 수로안쪽을 따라 최대유속이 발생하였다. 이는 만곡부의 정점부분에서의 이차류 발생 및 소멸에 의한 연직방향 유속분포를 통해 발생되는 현상이라 사료된다. 또한 본 연구에서는 2차원 하천해석 상용프로그램인 RAMS (베타버젼)와 SMS를 이용하여 흐름해석을 수행하였다. 실험 자료와의 비교를 통하여 두 가지 상용프로그램의 경우 모두 다소 과대 산정되는 것을 알 수 있었고, 만곡부와 직선부의 유속분포에 대한 모의결과는 RAMS (RAM2)의 결과가 보다 실험결과와 잘 일치하는 것으로 분석되었다. 위와 같은 유속분포의 분석을 통하여 각각의 상용소프트웨어의 적용성을 비교해 보았으며 향후 오염물질 거동해석 모형을 실험수로에 적용하여 그 결과를 비교할 수 있을 것으로 예상한다.

• 한국근적외분광분석학회:학술대회논문집
• /
• 한국근적외분광분석학회 2001년도 NIR-2001
• /
• pp.3112-3112
• /
• 2001

Near-Infrared Spectroscopy (NIRS) was investigated aiming at the identification of falsified drugs. The identification is based on comparison of the NIR spectrum of a sample with a typical spectra of an authentic drug using multivariate modelling and classification algorithms (PCA/SIMCA). Two spectrophotometers (Brimrose - Luminar 2000 and 2030), based on acoustic-optical filter (AOTF) technology, sharing the same controlling computer, software (Brimrose - Snap 2.03) and the data acquisition electronics, were employed. The Luminar 2000 scans the range 850 1800 nm and was employed for transmitance/absorbance measurements of liquids with a transflectance optical bundle probe with total optical path of 5 mm and a circular area of 0.5 $\textrm{cm}^2$. Model 2030 scans the rage 1100 2400 nm and was employed for reflectance measurement of solids drugs. 300 spectra, acquired in about 20 s, were averaged for each sample. Chemometric treatment of the spectral data, modelling and classification were performed by using the Unscrambler 7.5 software (CAMO Norway). This package provides the Principal Component Analysis (PCA) and SIMCA algorithms, used for modelling and classification, respectively. Initially, NIRS was evaluated for spectrum acquisition of various drugs, selected in order to accomplish the diversity of physico-chemical characteristics found among commercial products. Parameters which could affect the spectra of a given drug (especially if presented as solid tablets) were investigated and the results showed that the first derivative can minimize spectral changes associated with tablet geometry, physical differences in their faces and position in relation to the probe beam. The effect of ambient humidity and temperature were also investigated. The first factor needs to be controlled for model construction because the ambient humidity can cause spectral alterations that should cause the wrong classification of a real drug if the factor is not considered by the model.

• 대한의용생체공학회:의공학회지
• /
• 제30권5호
• /
• pp.418-427
• /
• 2009

As many people are westernizing their life style and food consumption habits, a number of patients who have malignant tumors which grow very rapidly and hazardously destroy the human body are increasing. Ultrasonic hyperthermia is not only one of the tumor treatment methods which employs the non-radioactive ultrasonic waves to increase the temperature at the tumor region up to $40\sim45^{\circ}C$ to destroy and suppress tumor cells but also has been proved by many studies. Due to the rapid development of High Intensity Focused Ultrasound(HIFU), the ultrasound hyperthemia extensively boosts its applications in clinical field. For those reasons, Computed simulation factor should be needed before inspection to patients. To prove efficiency of ultrasonic hyperthermia, precise acoustic field measurement considering tissue characteristics and a heating experiment with tissue mimicking material phantom were conducted for effectiveness of simulation program. Finally, in this study, the computer simulation program verified the anticipated temperature effects induced by ultrasound hyperthermia. In the near future, it is hoped that this simulation program could be utilized to improve the efficiency of ultrasound hyperthermia.

• 한국해양공학회지
• /
• 제25권6호
• /
• pp.91-96
• /
• 2011

In this paper, friction welded joints were constructed to investigate the mechanical properties of welded 15-mm diameter solid bars of Mg alloy (AZ31B). The main friction welding parameters were selected to endure reliable quality welds on the basis of visual examination, tensile tests, impact energy test, Vickers hardness surveys of the bonds in the area and heat affected zone (HAZ), and macrostructure investigations. The study reached the following conclusions. The tensile strength of the friction welded materials (271 MPa) was increased to about 100% of the AZ31B base metal (274 MPa) under the condition of a heating time of 1 s. The metal loss increased lineally with an increase in the heating time. The following optimal friction welding conditions were determined: rotating speed (n) = 2000 rpm, heating pressure (HP) = 35 MPa, upsetting pressure (UP) = 70 MPa, heating time (HT) = 1 s, and upsetting time (UT) = 5 s, for a metal loss (Mo) of 10.2 mm. The hardness distribution of the base metal (BM) showed HV55. All of the BM parts showed levels of hardness that were approximately similar to friction welded materials. The weld interface of the friction welded parts was strongly mixed, which showed a well-combined structure of macro-particles without particle growth or any defects. In addition, an acoustic emission (AE) technique was applied to derive the optimum condition for friction welding the Mg alloy nondestructively. The AE count and energy parameters were useful for evaluating the relationship between the tensile strength and AE parameters based on the friction welding conditions.