• Bulletin of the Korean Chemical Society
• /
• 제22권12호
• /
• pp.1309-1315
• /
• 2001

Zirconium sulfate supported on zirconia catalysts were prepared by impregnation of powdered $Zr(OH)_4$ with zirconium sulfate aqueous solution followed by calcining in air at high temperature. The characterization of prepared catalysts was performed using Fourier transform infrared (FTIR), X-ray diffraction (XRD), differential scanning calorimetry (DSC), and by the measurement of surface area. The addition of zirconium sulfate to zirconia increased the phase transition temperature of $ZrO_2$ from amorphous to tetragonal due to the interaction between zirconium sulfate and zirconia, and the specific surface area and acidity of catalysts increased in proportion to the zirconium sulfate content up to 10 wt% of $Zr(SO_4)_2$. Infrared spectra of ammonia adsorbed on $Zr(SO_4)2}ZrO_2$ showed the presence of Bronsted and Lewis acid sites on the surface. $10-Zr(SO_4)_2}ZrO_2$ calcined at $600^{\circ}C$ exhibited maximum catalytic activities for 2-propanol dehydration and cumene dealkylation. The catalytic activities for both reactions were correlated with the acidity of catalysts measured by ammonia chemisorption method.

• 한국융합학회논문지
• /
• 제12권9호
• /
• pp.185-191
• /
• 2021

본 연구에서는 보다 간단하고 신속한 공정으로 생산량 증가 및 비용절감을 도모할 수 있는 한국형 복분자 발사믹 식초 생산공정 개발을 위한 증류과정 도입가능성을 알아보았다. 증류과정을 통해 생산된 농축식초분획의 발사믹식초로서의 활용가능성과 증류식초분획의 증류식초로서의 활용가능성을 파악하기 위해 증류과정에서 얻어진 식초 분획을 대상으로 총산도, 산도pH 및 비중을 측정하였다. 총산도가 서로 다른 4종류의 식초(총산도; 4.42, 4.84, 5.61, 및 6.35)를 60%까지 증류했을 때 농축식초분획의 총산도는 증류 전 식초보다 평균 38.1% 증가하였다. 특히 최종 농축식초분획의 총산도 및 산도pH는 발사믹식초와 유사한 것으로 나타났다. 한편 증류식초분획 역시 총산도가 증가하여 최종 분획의 총산도는 각각 4.41%, 4.95%, 5.88%, 및 6.72% 이었으며 증류식초로 활용이 가능할 것으로 판단되었다. 본 연구에서는 증류공정을 통해 식초를 효과적으로 농축시킬 수 있을 뿐 만 아니라 동시에 증류식초를 생산할 수 있음을 확인하였다. 그러나 식초분획별로 유기산 함량 및 항산화활성 측정 등 추가적인 생화학적 특성 분석이 이루어져야 증류공정 도입여부를 결정할 수 있을 것으로 사료된다.

• Applied Biological Chemistry
• /
• 제33권3호
• /
• pp.257-260
• /
• 1990

김치 숙성도 판정을 위하여 $25^{\circ}C$에서 김치를 발효시키면서 생성되는 이산화탄소를 soda lime에 흡착시키면서 6시간 간격으로 무게 증가율을 측정하였다. 발효 36시간경에 무게 증가율이 최대값을 나타내었는데, 이는 pH, 적정 산도 및 관능 검사의 결과와 비교했을 때 김치의 숙성 적기와 비교적 잘 일치하였다. 따라서 이 방법은 김치의 숙성도를 판정하는 데 유효한 것으로 사료된다.

• 공업화학
• /
• 제16권5호
• /
• pp.684-688
• /
• 2005

산도가 각기 다른 양성자산(HF, HCI, HBr, HI, $H_2SO_4$)의 수용액내에서 아닐린을 중합하였다. 이때 산도(pH)와 상대이온(counter ion)의 반응성에 따른 반응속도에 관하여 조사하였다. 반응속도에 대한 양성자산의 영향을 조사하기 위하여, open-circuit potential을 측정하였다. 그 결과 HF 수용액내에서 중합속도가 가장 느리게 나타났고, HI 수용액내에서는 중합반응이 진행되지 않았으며, 이러한 결과들을 산도(pH)와 산화력과의 관계로 설명하였다. 양성자산의 종류에 따라 dimer들의 생성비율도 각기 다르게 나타났으며, 이러한 결과들을 상대이온(음이온)의 친핵성도 (nucleophilicity), 용매화효과 및 이동도의 영향으로 설명하였다.

• 원예과학기술지
• /
• 제30권6호
• /
• pp.709-717
• /
• 2012

To establish the standard of ripe kiwifruit sorting, near infrared (NIR) spectroscopy was performed on kiwifruit sampled from three farms. Destructive measurements of flesh firmness, soluble solids content (SSC), and acidity were performed and compared to measurement using NIR reflectance spectrums from 408 to 2,492 nm. NIR predictions of those quality factors were calculated using the modified partial least square regression method. Flesh firmness was predicted with a standard error of prediction (SEP) of 3.32 N and with a correlation coefficient ($R^2$) of 0.88. SSC was predicted with SEP of $0.49^{\circ}Brix$ and with $R^2$ of 0.98. Acidity was predicted with SEP of 0.28% and with $R^2$ of 0.91. Kiwifruit ripened at $20^{\circ}C$ for 15 days showed uneven qualities with normal distribution. Considering the SEP of each parameter, kiwifruit after ripening treatment could be non-destructively predicted their qualities and sorted by flesh firmness or soluble solids content through NIR prediction.

• Agricultural and Biosystems Engineering
• /
• 제1권2호
• /
• pp.81-87
• /
• 2000

Quality characteristics of tomatoes irradiated with light (red light of far-red light followed two days later with a red light treatment), treated with ethylene, and stored in darkness were evaluated by subjective sensory and objective physical and chemical evaluations. Overall and individual liking evaluations and sensory evaluations were made by an untrained panel of eighteen people. A rankin gof treatments for consumer (panelist) acceptability was also conducted by the panel. Physical and chemical evaluations included surface color measurement (L*, a*, and b*), mechanical puncturing (firmness), soluble solids content (SSC), titratable acidity(TA), and tomato juice pH. Sensory data showed that outside color, inside color, and flavor of tomatoes treated with red light (R) and far-red light/red light (FR/R) were scored significantly higher than those of tomatoes treated with ethylene and those kept in darkness. The L* values for tomatoes treated with R and FR/R were lower (more darkening) than those for tomatoes treated with ethylene and those stored in darkness. Tomatoes treated with FR/R had the highest A* values, followed by those irradiated with R, treated with ethylene, and kept in darkness, respectively. Sensory values for firmness were similar for tomatoes treated with R, FR/R, and ethylene. Treatments had no significantly different effects on sweetness and acidity. There were no significantly different effects between treatments for pH, SSC, TA, and SSC/TA. From observations made during the study, it was suggested that R irradiation stimulated red color development in tomatoes after it had been delayed by FR irradiation. Consumer acceptability for tomatoes with either R or FR/R treatment was significantly higher than that for tomatoes treated with ethylene or stored in darkness. panelists' overall liking scores correlated well with all sensory variables except acidity, and also correlated highly with inside color, flavor, and sweetness (P<0.001). Overall liking versus flavor had the most pronounced relationship (r=0.78, P<0.001).

• 한국식품조리과학회지
• /
• 제6권2호
• /
• pp.1-6
• /
• 1990

The purpose of this study was to investigate the effects of preheating and salt concentration on the fermentation rate and firmness of cucumber kimchi, and the relationship between firmness and the contents of pectin fractions, hemicellulose and cellulose during fermentation. For this purpose, pH, acidity, firmness and the contents of pectic fractions, hemicellulose and cellulose were studied. 1. The changes of pH and titratable acidity indicated that preheating and high salt concentration delayed the fermentation rate in cucumber kimchi. 2. After 9 days, preheated cucumber kimchi was firmer than nonpreheated cucumber kimchi. 3. During fermentation, the cucumber kimchi fermented at 5% NaCl was firmer than that femented at 2% NaCl. 4. After 9 days, preheated cucumber kimchi was higher in insoluble pectin (HCISP)content and lower in soluble pectin (HWSP & HXSP) content than nonpreheated cucumberkimchi and hese results in accord with those of firmness measurements. 5. During fermentation, the cucumber kimchi fermented at 5% NaCl was higher in insoluble pectin content and lower in soluble pectin content than nonpreheated cucumber kimchi, and these results were in accord with those of firmness measurement. 6. During fermentation, cellulose content decreased.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2018년도 춘계학술대회 논문집
• /
• pp.33.1-33.1
• /
• 2018

pH is expressed mathematically as $pH=-{\log}[H^+]$, is a measure of the hydrogen ion concentration, [$H^+$] to specify the acidity or basicity of an aqueous solution. The pH scale usually ranges from 0 to 14. Every aqueous solution can be measured to determine its pH value. The pH values below 7.0 express the acidity, above 7.0 are alkalinity and pH 7.0 is a neutral solution. The solution pH can be determined by indicator or by measurement using pH sensor, which measuring the voltage generated between a glass electrode and a reference electrode according to the Nernst Equation. The pH value of solutions depends on the temperature and the activity of contained ions. In nickel electroless plating process, the controlled pH value in some limited ranges are extremely important to achieve optimal deposition rate, phosphorus content as well as solution stability. Basically, nickel electroless plating solution contains of $Ni^{2+}ions$, reducing agent, buffer and complexing agents. The plating processes are normally carried out at $82-92^{\circ}C$. However, the change of its pH values with temperatures does not follow any rule. Thus, the purpose of study is to understand the relationship between pH and temperature of some based solutions and electroless nickel plating solutions. The change of pH with changing temperatures is explained by view of the thermal dynamic and the practical measurements.

• 동아시아식생활학회지
• /
• 제14권6호
• /
• pp.582-590
• /
• 2004

The purpose of this study was to investigate the effect of maesil(Prunus mume) on Dongchimi fermentation. Dongchimi with 0, 2, 4 and 6%(w/v) maesil was fermented at 10℃ for 45 days. The pH of Dongchimi decreased slowly in all samples during fermentation. Total acidity of Dongchimi increased gradually during fermentation and total acidity of Dongchimi with maesil was higher than that of control. Redox potentials decreased until 30 days of fermentation but increased thereafter. Reducing sugar content increased in the initial stage of the fermentation periods, and then it decreased gradually, the reducing sugar content of Dongchimi with maesil was higher than that of control. The content of total vitamin C was much higher in Dongchimi with maesil. In color measurement, lightness value decreased gradually, redness and yellowness values increased gradually during fermentation but decreased thereafter. The content of hot water soluble pectin(HWSP) decreased as the fermentation proceeded but the content of hydrochloric acid soluble pectin(HCISP) and sodium hexametaphosphate soluble pectin(NaSP) increased.

• 한국식품조리과학회지
• /
• 제32권2호
• /
• pp.211-221
• /
• 2016

Purpose: This study was conducted to investigate the physical and sensory properties of seasoned powders utilizing tomato. Methods: Tests of salted tomato powder were performed for the physiochemical properties (moisture content, pH value, titratable acidity, color value, salinity content, and solubility content), sensory characteristics and sensory preference. Results: Moisture content of salted tomato powder containing fully ripened tomato (RT) was higher than that of salted tomato powder containing cherry tomato (CT), with the exception of CT 10%. The pH values of RT was relatively high and increased salt addition increased the pH as well. The titratable acidity was opposite the result of pH measurement. The color values of RT was higher than that of CT for the L, a, and b values. The salt content of RT was higher than that of CT. RT 10% showed the highest dissolution followed by CT 10%. In addition, the sensory preference for CT 10% was the highest, with the best scores for appearance and taste. Conclusion: It was concluded that 10% salt addition is the most suitable sensually for the manufacture of salted tomato powder.