• 한국식품영양과학회지
• /
• 제43권12호
• /
• pp.1881-1888
• /
• 2014

본 연구는 당근을 열처리법 중에서 열수침지, 과열증기 및 볶음 처리에 따른 이화학적 및 영양학적 특성을 분석한 논문으로 열처리가 당근에 미치는 영향을 비교하고자 하였다. 상품을 구매할 때 1차적인 구매요소인 색도 및 경도 측정과 추가적으로 pH와 조직 관찰 결과로 최적 조건 선정 후 영양학적 및 관능검사를 실시하였다. 열처리를 하지 않은 대조구에 비해 짧은 시간의 열처리에서는 더 진하고 선명한 색을 띠었으나, 장시간 동안 처리한 열처리 시료는 색의 침착을 보였다. 원물과의 색은 열처리 후 차이를 나타냈지만 열수 및 과열증기 2분 처리까지가 원물과 가장 유사한 색을 나타냈으며, 경도는 열처리 시간에 따라 감소 경향을 나타냈고 볶음 처리는 짧은 시간으로도 물성이 연화됐으며, 열수침지 및 과열증기 처리는 2분까지 원물에 가까운 경도를 유지했으나 처리 시간이 길어질수록 경도가 확실히 감소하였다. 비타민, 유리당 및 유기산의 경우 열수침지 처리에서 가장 큰 손실을 보였고, 과열증기, 볶음 처리 순으로 손실된 결과를 보였다. 특히 유기산에서 succinic acid는 열수침지 처리 시 큰 손실률을 보이며 감소된 결과를 나타냈다. Peroxidase activity 변화는 열수침지 및 과열증기 처리에서 볶음 처리보다 높은 불활성화를 보였다. 당근의 열처리 조건은 과열증기 처리법으로 2분 동안 처리하는 것이 다른 처리법에서 처리한 시간들에 비해 최적으로 나타났다. 식품마다 열처리 방법 별 각각의 최적 처리 시간을 가지고 있어, 높은 효율성이나 산업적으로 이용하려면 최적의 전처리 방법과 처리 시간을 산정하는 것이 중요하다.

• 펄프종이기술
• /
• 제39권5호
• /
• pp.45-51
• /
• 2007

This study was carried out to investigate various heavy metal contents in packaging papers by pre-treatments for ICP-ES (Inductively Coupled Plasma Emission Spectrometry) analysis. Pre-treatment methods of heavy metals in this study include extraction, migration and decomposition methods (dry ashing, $HNO_3-HClO_4-HF,\;HNO_3,\;and\;H_2SO_4-HNO_3$). Test results were compared with conventional extraction (water) and migration (3% acetic acid) methods. The five representative heavy metals (Cd, As, Pb, Cr and Hg) were analyzed. For Cd, Hg, and As, the results were below detection limit of the instrumental technique. It was considered that the migration test was a better method compared to extraction test, but all the decomposition methods showed much higher detection values than the extraction or migration test. In case of recycled corrugated containers, 3% acetic acid solution extracted about 25% of chromium and 30% of lead compared to the content by decomposition methods. Among all decomposition methods, the nitric acid - perchloric acid - hydrofluoric acid treatment brought a slightly higher detection value than others, but there was no significant difference among them except sulfuric acid - nitric acid method.

• 대한환경공학회지
• /
• 제35권1호
• /
• pp.10-16
• /
• 2013

제당폐수를 산 또는 알카리 전 처리한 후 생물학적 수소생산율과 유기산의 생성특성을 평가하였다. 제당 폐수의 수소발생량은 산 전처리된 경우 보다 알칼리 전처리된 시료에서 약 70%의 발생량 증가를 나타내었다. 또한 제당폐수 원액에 적절한 영양염류(질소 인)를 공급하였을 때 보다 양호한 수소생성률을 보여주었다. 제당폐수의 혐기발효에 있어서 탄수화물의 분해와 수소생성의 직접적인 연관성은 나타나지 않았다. Butyric acid/Acetic acid (B/A)비와 수소생산의 연관성을 살펴보았을 때, 영양염류를 첨가한 제당폐수는 순수 제당폐수보다 B/A비가 약 3배 증가하였으며 알카리 전처리와 영양염류를 첨가한 시료에서 B/A비가 4.02로 가장 높게 나타났다. 실험에 사용된 전체 시료에서 B/A비가 클수록 수소생성률이 높았다.

• 한국대기환경학회지
• /
• 제22권4호
• /
• pp.431-439
• /
• 2006

Catalytic oxidation of benzene, toluene and xylene (BTX) using regenerated metal oxide catalysts (ZnO-CuO, NiO, $Fe_2O_3$, ZnO, CrO) were investigated in a fixed bed flow reactor to evaluate their feasibility for the purpose of removing volatile organic compounds (VOCs). Four kinds of pre-treatment methods such as gas (air and hydrogen), acid aqueous solution, alkali aqueous solution and cleaning agent were used to find out the optimal regeneration conditions. The physico-chemical properties of the used and regenerated catalysts were characterized by BET and TPR (Temperature Programmed Reduction). The used catalysts showed high conversion ratio and the catalytic ability of toluene oxidation was in the order of ZnO-CuO>$Fe_2O_3$>NiO>ZnO>CrO. We found that the acid aqueous pre-treatment (0.1 N HNO$_3$) was the best way to enhance the catalytic activity of $Fe_2O_3$. In addition, air and hydrogen gas treatment were optimal for NiO and ZnO-CuO catalysts, respectively. Furthermore, the decomposition of BTX depends on the type of a catalyst and a gas molecule.

• Preventive Nutrition and Food Science
• /
• 제17권1호
• /
• pp.46-52
• /
• 2012

This study was performed to investigate the effects of pre-treatment and storage temperature and periods on the quality characteristics of ginger paste. The pH of the ginger paste remained constant during room temperature storage but increased with prolonged refrigerated storage periods. During five months of frozen storage, regardless of pre-treatment, the pH of most of the samples decreased slightly and then remained constant. In the color value of ginger paste stored at room temperature, the samples with and without chemical additives changed in color more prominently than fermented or pasteurized samples. Intriguingly, the color value for samples containing chemical additives changed more dramatically when stored under refrigerated conditions. However, the L, a, and b values of samples stored under frozen storage conditions did not change even after ten months. Most of the samples contained glucose and fructose, except for the fermented samples. The free sugar content of samples slowly decreased with increasing storage periods, while the organic acid content generally decreased also, regardless of sample type. Depending on pre-treatment and storage temperature, the gingerol content of the samples was either retained or decreased with prolonged storage time.

• 한국의류산업학회지
• /
• 제12권4호
• /
• pp.523-530
• /
• 2010

The purpose of this research was to raise K/S value by mercerization and tannic acid treatment in cotton fabrics. K/S value was 2.84-3.56 in mercerized none-mordant fabrics and it is 5.12-5.36 in tannic acid treatment. As the result, it showed higher in processed cotton fabrics than in unprocessed ones. Processed cotton fabrics had high K/S value in pH 3, pre-mordant. Antibacterial activity showed 99.9% in tannic acid and Cu mordanted fabrics. Deodorization and UV-cut effect were showed a higher effect in dyed fabrics than in undyed ones.

• Membrane and Water Treatment
• /
• 제14권2호
• /
• pp.77-83
• /
• 2023

As a result of algal bloom, algal organic matters (AOMs) are rapidly increased in surface water. AOMs can act as precursors for the formation of harmful disinfection by-products (DBPs), which are serious problems in water treatment and human health. The main aim of this study is to characterize the formation of DBPs from AOMs produced by three different algae such as Oscillatoria sp., Anabaena sp., and Microcystis aeruginosa under different algal growth phases. In an effort to examine formation of DBPs during chlorination, chloroform (TCM), dichloroacetic acid (DCAA) and trichloroacetic acid (TCAA) were determined under various CT (product of disinfectant concentration and contact time, mg·min/L) values. Generally, the amounts of DBPs tended to increase with increasing CT values at the most growth phases. However, there was a significant difference between the amounts of DBPs produced by the three algal species at different growth phases. This result is likely due to the chemical composition variability of AOM from different algae at different growth phases. In addition, the effect of pre-ozonation on coagulation for the removal of AOMs from three algal species was investigated. The pre-ozonation had a positive effect on the coagulation/flocculation of AOMs.

• 패션비즈니스
• /
• 제11권5호
• /
• pp.79-89
• /
• 2007

The effect of chitosan treatment on the dyeing and dye fastness, and mechanical properties of hair was investigated in this study when the carotinoid dyestuffs extracted from African Marigold(Tagetes erecta L.) were applied to the hair. The sequences of the chitosan treatment were changed in dyeing and mordanting procedures, i.e., pre-treatment, mid-treatment, and post-treatment. While the effect of chitosan application on the color shade change was not significant, the pre-treatment of the chitosan increased the dye uptake. Discoloration and fading was observed in the lightfastness test when chitosan was mid-treated. Alkali perspiration and acid perspiration fastness test results showed that chitosan post-treatment gave lower tendency. Washing fastness results showed that chitosan post-treatment and mid-treatment gave lower values, which indicates that chitosan deters the direct formation of insoluble complex among fiber-dyestuff-mordant. In the mechanical characteristics results, however, initial modulus and breaking strength increased significantly in the post-treatment and pre-treatment of chitosan.

• 한국환경보건학회지
• /
• 제35권5호
• /
• pp.402-410
• /
• 2009

This study was carried out to examine the optimal analytical method for determination of urinary toxic arsenic (inorganic arsenic and its metabolites) by HG-AAS (hydride generation-atomic absorption spectrometry). In the analysis of SRMs (standard reference materials), method E (addition of 0.4% L-cysteine to pre-reductant and use 0.04M HCl as carrier acid) showed the most accurate results compared with the reference values. In the analysis of 30 urinary samples, analytical results were significantly different depend on the component of pre-reductant and the concentration of carrier acid. When the concentration of carrier acid was higher, the analytical result was lower. The recovery rates of MMA (monomethylarsonic acid) and DMA (dimethylarsenic acid) were varied by the concentration of pre-treatment acid and carrier acid and hydride generation reagents. When the concentration of carrier acid was 1.62 M (5% HCl), the recovery rates of DMA was 1%. The recovery rates of MMA and DMA in method E (=V) were 102% and 100%, respectively. The results of this study suggest that the component and concentration of pre-reductant and carrier acid must be carefully adjusted in the analysis of urinary arsenic, and method E is recommendable as the most precise analytical method for determination of urinary toxic arsenic.

• Macromolecular Research
• /
• 제13권3호
• /
• pp.206-211
• /
• 2005

Multi-walled carbon nanotubes (MWNTs) pre-treated by concentrated mixed acid or oxidized at high temperature were melt mixed with poly(methyl methacrylate) (PMMA) using a twin screw extruder. The morphologies and electrical properties of the MWNT/PMMA composites were investigated. The thermally treated MWNTs (t-MWNTs) were well dispersed, whereas the acid treated MWNTs (a-MWNTs) were highly entangled, forming large-sized clusters. The resulting electrical properties of the composites were analyzed in terms of the carbon nanotube (CNT) dispersion. The experimental percolation threshold was estimated to be $3 wt\%$ of t-MWNTs, but no percolation occurred at similar concentrations in the a-MWNT composites, due to the poor dispersion in the matrix.