• Restorative Dentistry and Endodontics
• /
• 제26권1호
• /
• pp.41-50
• /
• 2001

The purpose of this study was to examine the influences of camphoroquinone on the properties of five experimental composites. The contents of camphoroquinone were varied as 0.2%, 0.3%, 0.4%, 0.5%, and 0.6%, with silanized filler 75% and tertiary amine 0.2%. Five kinds of experimental composites were prepared, and diametral tensile strength, shear bond strength, depth of cure and yellowish discoloration were tested as a measurement. Specimen numbers of 10 were applied to all test items and experimental groups. Specimens for testing the diametral tensile strengths with internal diameter of 6mm in diameter and 3mm in height were filled with 5 experimental composites which were crushed with 1mm/min cross-head speed on Instron universal testing machine (Model No. 4467). Shear bond strength was measured on specimens attached to bovine teeth enamel etched with 37% phosphoric acid. Depth of cure was measured by the measurement of height of specimens which were removed the un-polymerized portion with acetone. Yellowness measurements were made by chromometer(Minolta Co. Japan) using L$^*$a$^*$b$^*$ values. ANOVA and Multiple range tests were used analyzed data with confidence level at 95%. The mean value of the shear bond strengths ranged from 31.03MPa to 39.49MPa. Following results were obtained ; 1. Diametral tensile strength was highest in experimental group 3, then was not affected by the contents of camphoroquinone ($r^2$=0.0422). 2. Composite resins containing 0.4% camphoroquinone showed the highest shear bond strength, but there was no statistical significance (p=0.3718). 3. Camphoroquinone reduces the depth of cure in the composite resins (p=0.0004, $r^2$=0.9483). 4. Camphoroquinone made the composites yellowish ($r^2$=0.9815). These results mean that increased content of camphoroquinone reduces the depth of cure, and that camphoroquinone make composites yellowish.

• Restorative Dentistry and Endodontics
• /
• 제25권3호
• /
• pp.421-434
• /
• 2000

The purpose of this study was to evaluate the influences of incorporation of zirconium-silicate on diametral tensile strength, shear bond strength to the enamel, and depth of cure of 7 experimental composites. One group contained no filler(group 1 or control group), and the other 6 composites contain 75% filler in which zirconium-silicate(Zr-Si) were 0%, 2%, 4%, 6%, 8%, 10% with reduced contents of silica filler, respectively. Both of fillers were treated with 1% silane (${\gamma}$-methacryloxypropyltrimethoxy silane). Light curable monomers were prepared by mixing Bis-GMA and TEGDMA with 3:1 ratio and adding camphoroquinone(CQ) 0.6% with tertiary amine 0.3%. Diametral tensile strengths of specimens with $3mm{\times}6mm$ were measured with Instron (No.4467, USA) with 1mm/min crosshead speed. Shear bond strengths of composites which bonded to bovine enamel etched with 37% phosphoric acid were measured at Instron Testing Machine with as same speed as in diametral tensile strengths. Depth of cure were measured by a method that composite was filled in cylinder mold, illuminated at one side. and uncured composite was removed with acetone, and the residual thickness of composite was measured. Following results were obtained ; 1. Composites containing 0%, 2%, or 4% zirconium-silicate filler(group 2, 3 and 4) showed the statistically higher diametral tensile strength than the others. (p<0.05) 2. Increase of zirconium-silicate filler contents reduced the diametral tensile strength of experimental composites. ($r^2$=0.8721, p=0.0002) 3. Increase of zirconium-silicate filler contents did not affect the shear bond strength of experimental composites. ($r^2$=0.2815, p=0.4067) 4. Increase of zirconium-silicate filler contents reduced significantly the depth of cure of experimental composites. ($r^2$=0.9700, p<0.0001) These results mean that the mechanical properties of composites could not be improved by incorporation of small amount of zirconium-silicate filler. Also, the increased contents of zirconium-silicates fillers was found to reduce the diametral tensile strength and depth of cure.

• 대한소아치과학회지
• /
• 제36권1호
• /
• pp.30-37
• /
• 2009

초기 법랑질 우식은 환자의 구강 위생 증진 및 국소적 불소 도포를 통해 재광화가 가능하나 이는 환자의 협조도에 전적으로 의존하게 되어 있어 임상적 효과를 확신하기 힘들다. 그 대안으로 병소 진행의 보다 초기 단계에 병소의 미세 다공구조를 광중합 레진으로 전색하는 시도가 행해져 오고 있다. 그러나 법랑질 초기 우식의 표층은 병소 본체에 비해 상대적으로 낮은 세공 용적으로 인하여 접착레진의 침투를 방해할 수 있다. 따라서 적절한 표면 처리를 통한 표층의 일부 혹은 전체의 제거가 접착레진의 침투에 중요하다. 그러나 아직까지 자연적인 법랑질 초기 우식 병소의 표면 처리에 관한 연구는 부족한 실정이다. 이에 본 연구에서는 평활면 법랑질 초기 우식에 대한 접착레진 적용 전 적절한 표면 처리 방법을 알아보고자 시행되었다. 인접면에 법랑질 초기 우식을 보이는 39개의 발거된 유구치를 각기 다른 방법의 표면처리를 시행한 바, 수세만 시행한 대조군인 1군, 15초간 15% 염산 처리한 2군, 15초간 35% 인산 처리한 3군, 30초간 35% 인산 처리한 4군, 0.5% 차아염소산나트륨으로 세척한 5군의 5개 군으로 이루어졌다. 각 군당 3개의 치아는 주사전자현미경으로 관찰하고, 나머지 24개에는 접착레진을 도포하고 그 절단 시편을 공초점 레이저 주사현미경으로 관찰하여 다음과 같은 결론을 얻었다. 1. 주사전자현미경 관찰 결과, 2군에서 가장 명백한 표층 제거가 관찰되었고, 3군과 4군에서는 일부 불규칙적인 표층 제거, 5군에서는 미약한 표층 제거가 나타났다. 2. 각 군의 평균 침투 깊이는 $6.85{\sim}23.09{\mu}m$로 측정되었으며, 침투 깊이의 군간 비교에서는 2군에서 가장 크게, 이어 4군, 3군, 5군, 1군의 순이었으며, 5군을 제외한 모든 실험군에서는 대조군에 비해 크게 나타났다. (p<0.01)

• 대한소아치과학회지
• /
• 제49권3호
• /
• pp.264-273
• /
• 2022

치과에서 사용하는 재료들의 물성의 발달로 인하여 브라켓과 치아 사이의 결합 능력도 크게 향상되었다. 그러나 소아치과 영역에서와 같이 환자의 협조를 기대하기 어렵거나, 수분 격리가 제대로 이루어지지 않을 경우 기대하는 효과에 미치지 못하는 결합강도를 보여 줄 수 있다. 본 연구의 목적은 세 가지의 접착 술식을 비교하여 브라켓의 전단 접착 강도를 평가하고, 임상적으로 유의한 차이가 존재하는지 비교하는 것이다. 우식증이나 수복물이 없는 상, 하악 소구치 60개 치아를 대상으로 하였다. Group I은 대조군으로서 기존의 3 step 접착 방식에 따라 브라켓을 부착하였고, Group II는 self-etching primer system을 이용하여 부착하였다. Group III는 self-priming adhesive를 이용하여 브라켓을 부착하였다. 각 group의 전단 결합 강도를 측정하고 접착제 잔류지수(ARI)를 기록하였다. 각 group I, II, III의 평균 전단 결합 강도는 14.69 MPa, 11.21 MPa 그리고 12.21 MPa로 측정되었다. Group I과 II, group I과 III에서만 유의한 차이가 존재하였으며(p < 0.05), ARI 값은 모든 group에서 유의한 차이가 존재하지 않았다.

• 대한치과교정학회지
• /
• 제33권1호
• /
• pp.51-61
• /
• 2003

본 연구는 6세대 교정용 접착 시스템인 Transbond Plus Self-Etching Primer(3M/Unitek Dental Products, Monorovia, Calif)를 이용하여 법랑질면에 브라켓을 접착하는 방법과, 통상적인 산부식 방법에 의해 브라켓를 접착한 경우의 전단결합강도 차이를 비교$\cdot$평가하고, self etching primer를 이용하여 브라켓을 접착할 때 치면에 존재하는 수분이 브라켓의 저단결합강도에 미치는 영향에 관하여 조사하였다. $37\%$ 인산용액과 Self-Etching Primer를 이 용하여 법랑질을 표면 처 리하고 Transbond XT를 이 용하여 브라켓을 치면에 부착하였다. 또한 수분의 존재에 따른 전단결합강포의 차이를 평가하기 위해 인공타액을 치면예 도보후 Self-Etching Primer를 사용하여 브라켓을 부착한 후 30분과 24시간에 따른 전단결합강도를 비교 평가하여 다음과 같은 결론을 얻었다. 1. Self-etching primer군에서 건조군과 습윤군의 전단결합강도는 $37\%$인산처리군의 결합강도보다 낮았다(p<0.05). 그러나 Self-etching primer군의 전단결합강도는 일상적으로 유용한 수준의 이상이었다. 2. 모든군에서 24시간군의 전단결합강도가 30분군의 전단결합강도보다 높았으며 (p<0.05), 이는 브라켓 접착후 일정시간의 경과가 결합강도를 증가시켜 줌을 알 수 있었다. 3. Self-etcing primer군에서 습윤군의 전단결합강도는 건조군보다 높은 경향이었으나 통계적 유의성은 인정되지 않았다(P>0.05). 4 ARI 점수의 비교결과 인산처리군에서는 0점과 1점의 빈도가 높았으며, Self-etching primer 건조군과 습윤군에서는 2점과 3점의 빈도가 높아(p<0.05) Self-etching primer군이 인산처리군보다 법랑질-레진 접착계면부위에서의 파절이 많이 일어남을 알 수 있었다.

• 대한치과보철학회지
• /
• 제41권5호
• /
• pp.606-616
• /
• 2003

Purpose : The purpose of this study was to research the properties of some chemically cured methacrylate polymers such as MMA, HEMA, TEG-DMA, bis-GMA, GMA. Material and Method : 5 kinds of methacrylates were selected and added 2% tertiary amine and benzoyl peroxide to make a chemically curable polymer 25 micron crushed silicas which are treated with silane were selected as filler, they were added into methacrylate monomer until the consistency did not changed by the load of 500gram. All of the experimental resins were 5 kinds, and a serial test was done with 3 kinds of items including the filler contents, the tensile strength, and the bond strength. The number of specimen were 10 for each group. Filler contents were obtained by reducing the specimens to ashes at $600^{\circ}C$ for 1 hour. The specimens with the dimension of 6mm in diameter and 3mm thick were immersed in $37{\pm}1^{\circ}C$ distilled water for 24 hours before test, and tensile strength were measured with cross-head speed 1mm/min. Shear bond strength were mea sured on the specimens attached to bovine enamel etched with 37% phosphoric acid for 1 minute. Results : 1. Maximum filler incorporation was the highest as 75.5% on MMA, and the least as 53.4% on bis- GMA(p<0.0001). 2. The tensile stregth were MMA 141.3, GMA 154.3, TEG-DMA 157.4, bis-GMA 161.4 MPa, and HEMA showed the highest value, 226.9MPa(p = 0.0004). 3. The bond strength were GMA 10.1, TEG-DMA 11.7, HEMA 12.2, bis-GMA 13.3 MPa, and MMA showed the highest value, 15.3MPa, however statistical significances were not (p =0.3838), 4. TEG-DMA and HEMA were not different on the aspect of maximum filler contents and shear bond strength(p>0.05). Conclusion : HEMA can be used as an another diluent substituting TEG-DMA with the increased strength and with the constant bond strength and the constant filler contents.

• Restorative Dentistry and Endodontics
• /
• 제15권1호
• /
• pp.107-119
• /
• 1990

The purpose of this study was to evaluate the marginal adaptability of the amalgam restorations in applying the cavity varnish (Copalite$^{(R)}$) and dentin bonding agent (Scotchbond 2$^{(R)}$) under the scanning electron microscope. For this study, eighteen sound extracted human molars were selected. Class I cavities in 12 teeth and class V cavities in 6 teeth were prepared using an air turbine with No. 701 tungsten carbide bur and finished using a low speed handpiece with No. 557 fissure bur. The prepared specimens were then divided into three groups including 4 class I cavities and 2 class V cavities in each group and restored as follows ; Group I. All the prepared cavities were restored with amalgam only (Control). Group II. Two layers of Copalite$^{(R)}$ cavity varnish were applied to the cavities with a gentle stream of air after each application and cavities were restored with amalgam. Group III. The enamel cavity margins were etched with 37% phosphoric acid gel for 60 sec., rinsed for 30 sec. and dried. One layer of visible lightcured Scotchbond Dental Adhesive$^{(R)}$ was applied and immediately cured for 20 seconds with visible light-cure unit and cavities were restored with amalgam. All the specimens were cut at the neck of the teeth and the occlusal halves of specimens were sectioned buccolingually in the longitudinal axis centering the amalgam restorations, using the disk. The cut specimens were ground with sandpapers (400, 600, 800, 1000 grit), and cleaned for 5 minutes in the ultrasonic cleaner (Brason Co. U.S.A.). In the cut surfaces, the amalgam - tooth interfaces were examined under the scanning electron microscope (JSM, 35C type, JEOL). The obtained results were as follows ; 1. The amalgam-tooth interfaces were reduced more significantly in the Copalite$^{(R)}$ and Scotchbond 2$^{(R)}$ application group than in the control group. 2. In the class I cavities, the Scotchbond 2$^{(R)}$ application group showed the findings similar to the Copalite$^{(R)}$ application group in the cavity floor, and the marginal adaptability was better in the side wall than in the cavity floor. 3. In the class I cavities, the Scotchbond 2$^{(R)}$ application group showed better marginal adaptability in the occlusal margin than in the gingival margin. 4. The marginal adaptability was in the order of the Scothbond 2$^{(R)}$ application group, the Copalite$^{(R)}$ application group and the control group.