• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.11a
• /
• pp.223-223
• /
• 2007

Thermal and mechanical properties were investigated in several semi-conductive materials which is composed of carbon black and polymer. EVA, EEA, and EBA is normally used for matrix polymer and normally acetylene black and furnace black is used. Isothermal thermo gravimetric analysis is done as a function of atmosphere and temperature. In nitrogen atmosphere semicon compound was slowly degradaded but in ambient condition degradaded fast. So in the cable manufacturing, atmosphere and materials are very important.

• Journal of the Korean Institute of Gas
• /
• v.10 no.3 s.32
• /
• pp.60-64
• /
• 2006

Explosion range and explosion characteristics of by product gas from carbon black manufacturing process were studied. About 75% of the by product gas were composed with water vapour and nitrogen. And the combustible component in the gas were hydrogen, methane, acetylene and carbon mono-oxide. Because of the combustible components in the by product gas there are explosion hazards in the gas handling process. Explosion range of the gas by experiment was from 17.1% to 70.7% and the value has considerable difference with the calculated value from Lechatelier law. Explosion pressure of the gas was $5.4kg/cm^2$ and the average explosion pressure rise rate was $39.2kg/cm^2/s$. Based on the experimental result we can expect that a explosion or fire accident during the handling the gas can make a severe loss, therefore there should be a explosion prevention or protection measures in the gas handling process.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.26 no.2
• /
• pp.119-125
• /
• 2013

In this paper, semiconducting shield specimens for a DC cable is fabricated and characterized by measurement of volume resistance, tensile strength, and the coefficient of expansion to show the electrical and mechanical characteristics of the semiconducting shield. Due to the PTC phenomenon, the volume resistance at $25^{\circ}C$ increases rapidly in comparison to the volume resistance at $90^{\circ}C$. Since the compounding ratio of carbon black is low, the tensile strength and density become lower and the coefficient of expansion is increased. As the general specification of the tensile strength and density is $0.8kgf/mm^2$ and 150%, respectively, the fabricated specimen in this paper has excellent mechanical characteristic.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.11a
• /
• pp.316-316
• /
• 2007

리튬폴리머 전지용 정극활물질인 $LiFePO_4$를 수열법으로 합성하였다. 제조한 정극활물질 $LiFePO_4$는 X-ray 회절분석을 통하여 olivine 구조임을 확인하였다. 전극 제조 시 첨가된 도전재의 종류에 따른 전기화학적 특성변화를 알기 위하여, Acetylene Black, Super-Black, Multi-Walled Carbon Nanotube(MWCNT), SP270을 도전재로 제조된 정극활물질과 PVDF를 결합제로 사용하였다. 셀은 제조된 정극과 고체전해질 $25PVDFLiCIO_4EC_{10}PC_{10}$를 사용하고, 부극은 금속리튬으로 coin 타입의 cell을 조립하여 충방전을 진행하였다. 충방전 진행결과, Multi-Walled Carbon Nanotube(MWCNT)를 도전재로 사용하였을 경우, 초기 방전용량은 94mAh/g, 100cycle 후에는 약 93mAh/g인 기타 도전재를 사용하였을 때보다 안정하고 높은 방전용량을 나타내었다. 이때의 충방전 전류밀도는 0.1mAh/g이고 전압범위 는 2.5~4.3V이었다.

• Proceedings of the Safety Management and Science Conference
• /
• 2004.05a
• /
• pp.247-257
• /
• 2004

Electrodes were fabricated based on activated carbon powder BP-20, conducting agent such as Super P, vapor grown carbon fiber (VGCF) and acetylene black (AB), and the mixed binders of flexible poly(vinylidenefluoridehexafluoropropylene) [P(VdF-co-HFP)] and cross linking dispersion agent of polyvinylpyrrolidone (PVP) to increase mechanical strength. According to impedance measurement of the electrode with the addition of conducting agent, we found that it was possible to charge rapidly by the fast steady-state current convergence due to low equivalent series resistance (AC-ESR, fast charge transfer rate at interface between electrode and electrolyte and low RC time constant. The self-discharge of unit cell showed that diffusion process was controlled by the ion concentration difference of initial electrolyte due to the characteristics of Electric Double Layer Capacitor (EDLC) charged by ion adsorption in the beginning, but this by current leakage through the double-layer at the electrode/electrolyte interface had a minor effect and voltages of curves were remained constant regardless of electrode material. We found that the 2.3V/230F grade EDLC would be applied to industrial safety usage such as uninterrupted power supply (UPS) because of the constant DC-ESR by IR drop regardless of discharge current.

• Journal of Electrochemical Science and Technology
• /
• v.15 no.3
• /
• pp.388-404
• /
• 2024

In the present work, the operating parameters were optimized using Box Behnken Design (BBD) in response surface methodology (RSM) to maximize the hydrogen production rate (R₁) and hydrogen production rate per unit watt consumed (R₂) of a proton exchange membrane electrolysis cell (PEMEC), a third response (R₃) which was the sum of the scaled values of R₁ and R₂ were selected to be maximized so that both hydrogen production rate and hydrogen production rate per unit watt consumed could be maximized. The major parameters which were influencing the experiment for enhancing the output responses were oxygen electrode/anode electrocatalyst loading (A), current supplied (B) and water inlet temperature (C). The commercial proton exchange membrane Nafion^® was used as the electrolyte. The acetylene black carbon (C_AB) supported IrO₂ was used as the electrocatalyst for preparing oxygen electrode/anode whereas commercial Pt (40 wt%)/C_HSA was used as the H₂ electrode/cathode electrocatalyst. The quadratic model was developed to predict the output/ responses and their proximity to the experimental output values. The developed model was found to be significant as the P values for both the responses were < 0.0001 and F values were greater than 1. The optimum condition for both the responses were O₂ electrode/anode electrocatalyst loading of 1.78 mg/cm², supplied current of 0.33 A and water inlet temperature of 54℃. The predicted values for hydrogen production rate (R₁) and hydrogen production rate per unit watt consumed (R₂) were 2.921 mL/min and 2.562 mL/(min·W), respectively obtained from the quadratic model. The error % between the predicted response values and experimental values were 1.47% and 3.08% for R₁ and R₂, respectively. This model predicted the optimum conditions reasonably in good agreement with the experimental conditions for the enhancement of the output responses of the developed PEM based electrolyser.