• Science of Emotion and Sensibility
• /
• v.22 no.4
• /
• pp.31-44
• /
• 2019

This study intended to investigate the effects of the subtitle location on the decreased working memory abilities caused by aging. A junior group (average age: 26, SD: 3.06, N=27) and a senior group (average age: 61.69, SD=4.18, N=26) participated in this study and they all performed N-back tasks which measured the working memory ability of the participants and video subtitle recognition tasks that assessed the most effectively recognized subtitle locations in the video. The results of the N-back task revealed slower response times and low accuracy rates in the senior group in comparison to the junior group, suggesting lower working memory abilities in the senior group vis-à-vis the junior group. The deterioration of working memory due to aging also negatively influenced the 'left-bottom' subtitle location in the video subtitle recognition task and positively influenced the 'left-center' location of the screen. The deterioration of working memory ability did not affect other subtitle locations. By examining the positive or negative effects of the deterioration of working memory ability as a function of age on subtitle locations, the present study suggests that the selection of suitable subtitle locations taking into account the ages of video viewers would cause information to be more effectively displayed on screen.

• Tunnel and Underground Space
• /
• v.33 no.5
• /
• pp.348-372
• /
• 2023

In relation to the high-level radioactive waste disposal project in deep fractured rock aquifer environments, it is essential to evaluate hydrogeological characteristics for evaluating the suitability of the site and operational stability. Such subsurface hydrogeological data is obtained through in-situ tests using boreholes excavated at the target site. The accuracy and reliability of the investigation results are directly related to the selection of appropriate test methods, the performance of the investigation system, standardization of the investigation procedure. In this report, we introduce the detailed procedures for the representative test method, the constant pressure injection test (CPIT), which is used to determine the key hydrogeological parameters of the subsurface fractured rock aquifer, namely hydraulic conductivity and storativity. This report further refines the standard test method suggested by the KSRM in 2022 and includes practical field application case conducted in volcanic rock aquifers where this investigation procedure has been applied.

• The Mathematical Education
• /
• v.63 no.2
• /
• pp.165-186
• /
• 2024

Despite the growing attention on artificial intelligence-based automated scoring technology as a support method for the introduction of descriptive items in school environments and large-scale assessments, there is a noticeable lack of foundational research in mathematics compared to other subjects. This study developed an automated scoring model for two descriptive items in first-year middle school mathematics using the Random Forest algorithm, evaluated its performance, and explored ways to enhance this performance. The accuracy of the final models for the two items was found to be between 0.95 to 1.00 and 0.73 to 0.89, respectively, which is relatively high compared to automated scoring models in other subjects. We discovered that the strategic selection of the number of evaluation categories, taking into account the amount of data, is crucial for the effective development and performance of automated scoring models. Additionally, text preprocessing by mathematics education experts proved effective in improving both the performance and interpretability of the automated scoring model. Selecting a vectorization method that matches the characteristics of the items and data was identified as one way to enhance model performance. Furthermore, we confirmed that oversampling is a useful method to supplement performance in situations where practical limitations hinder balanced data collection. To enhance educational utility, further research is needed on how to utilize feature importance derived from the Random Forest-based automated scoring model to generate useful information for teaching and learning, such as feedback. This study is significant as foundational research in the field of mathematics descriptive automatic scoring, and there is a need for various subsequent studies through close collaboration between AI experts and math education experts.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.2
• /
• pp.423-430
• /
• 2013

Recently, the personal identification technologies using vein pattern of back of the hand, palm, and finger have been developed actively because it has the advantage that the vein blood vessel in the body is impossible to damage, make a replication and forge. However, it is difficult to extract clearly the vein region from captured vein images through common image prcessing based region segmentation method, because of the light scattering and non-uniform internal tissue by skin layer and inside layer skeleton, etc. Especially, it takes a long time for processing time and makes a discontinuity of blood vessel just in a image because it has non-uniform illumination due to use a locally different adaptive threshold for the binarization of acquired finger-vein image. To solve this problem, we propose illumination normalization based fast method for extracting the finger-vein region. The proposed method has advantages compared to the previous methods as follows. Firstly, for remove a non-uniform illumination of the captured vein image, we obtain a illumination component of the captured vein image by using a low-pass filter. Secondly, by extracting the finger-vein path using one time binarization of a single threshold selection, we were able to reduce the processing time. Through experimental results, we confirmed that the accuracy of extracting the finger-vein region was increased and the processing time was shortened than prior methods.

• Korean Journal of Remote Sensing
• /
• v.28 no.1
• /
• pp.171-180
• /
• 2012

The field of wildlife habitat conservation research has attracted attention as integrated biodiversity management strategies. Considering the status of the species surveying data and the environmental variables in Korea, the GARP and Maxent models optimized for presence-only data could be one of the most suitable models in habitat modeling. For make sure applicability in the domestic environment we applied the machine learning species distribution model for analyzing habitats of the Korea water deer($Hydropotes$ $inermis$ $argyropus$) in the $Sapgyocheon$ watershed, $Chungcheong$ province. We used the $3^{rd}$ National Natural Environment Survey data and 10 environment variables by literature review for the modelling. Analysis results showed that habitats for the Korea water deer were predicted 16.3%(Maxent) and 27.1%(GARP), respectively. In terms of accuracy(training/test) the Maxent(0.85/0.69) was higher than the GARP(0.65/0.61), and the Spearman's rank correlation coefficient result of the Maxent(${\rho}$=0.71, p<0.01) was higher than the result of GARP(${\rho}$=0.55, p<0.05). However results could be depended on sites and target species, therefore selection of the appropriate model considering on the situation will be important to analyzing habitats.

• Journal of Korea Water Resources Association
• /
• v.47 no.11
• /
• pp.1039-1050
• /
• 2014

The goal of this study is to demonstrate the diversity of model performance for various climatic elements and indicators. We evaluated the skills of the most advanced 17 General Circulation Models (GCMs) i.e., CMIP5 (Climate Model Inter-comparison project, phase 5) climate models in reproducing retrospective climatology from 1950 to 2000 over the Southeast US for the key climatic elements important in the hydrological and agricultural perspectives (i.e., precipitation, maximum and minimum temperature, and wind speed). The biases of raw CMIP5 GCMs were estimated for 16 different climatic indicators that imply mean climatology, temporal variability, extreme frequency, etc. using a grid-based observational dataset as reference. Based on the error (RMSE) and correlation (R) of GCM outputs, the error-based GCM ranks were assigned on average over the indicators. Overall, the GCMs showed much better accuracy in representing mean climatology of temperature comparing to other elements whereas few GCM showed acceptable skills for precipitation. It was also found that the model skills and ranks would be substantially different by the climatic elements, error statistics applied for evaluation, and indicators as well. This study presents significance of GCM uncertainty and the needs of considering rational strategies for climate model evaluation and selection.

• Korean Journal of Construction Engineering and Management
• /
• v.14 no.3
• /
• pp.42-52
• /
• 2013

The aim of this study is to present a prediction model of construction cost for a bridge that has a high reliability using historical data from the planning phase based on a CBR (Case-Based Reasoning) method in order to overcome limitations of existing construction cost prediction methods, which is linearly estimated. To do this, a reasoning model of bridge construction cost by a spreadsheet template was suggested using complexly both CBR and GA (Genetic Algorithm). Besides, this study performed a case study to verify the suggested cost reasoning model for bridge construction projects. Measuring efficiency for a result of the case study was 8.69% on average. Since accuracy of the suggested prediction cost is relatively high compared to the other analysis methods for a prediction of construction cost, reliability of the suggested model was secured. In the case that information for detailed specifications of each bridge type in an initial design phase is difficult to be collected, the suggested model is able to predict the bridge construction cost within the minimized measuring efficiency with only the representative specifications for bridges as an improved correction method. Therefore, it is expected that the model will be used to estimate a reasonable construction cost for a bridge project.

• Journal of Service Research and Studies
• /
• v.13 no.2
• /
• pp.99-113
• /
• 2023

In a customer-based industry, customer retention is the competitiveness of a company, and improving customer retention improves the competitiveness of the company. Therefore, accurate prediction and management of potential dormant customers is paramount to increasing the competitiveness of the enterprise. In particular, there are numerous competitors in the domestic card industry, and the government is introducing an automatic closing system for dormant card management. As a result of these social changes, the card industry must focus on better predicting and managing potential dormant cards, and better predicting dormant customers is emerging as an important challenge. In this study, the Recurrent Neural Network (RNN) methodology was used to predict potential dormant customers in the card industry, and in particular, Long-Short Term Memory (LSTM) was used to efficiently learn data for a long time. In addition, to redefine the variables needed to predict dormant customers in the card industry, Unified Theory of Technology (UTAUT), an integrated technology acceptance theory, was applied to redefine and group the variables used in the model. As a result, stable model accuracy and F-1 score were obtained, and Hit-Ratio proved that models using LSTM can produce stable results compared to other algorithms. It was also found that there was no moderating effect of demographic information that could occur in UTAUT, which was pointed out in previous studies. Therefore, among variable selection models using UTAUT, dormant customer prediction models using LSTM are proven to have non-biased stable results. This study revealed that there may be academic contributions to the prediction of dormant customers using LSTM algorithms that can learn well from previously untried time series data. In addition, it is a good example to show that it is possible to respond to customers who are preemptively dormant in terms of customer management because it is predicted at a time difference with the actual dormant capture, and it is expected to contribute greatly to the industry.

• The Journal of Bigdata
• /
• v.8 no.2
• /
• pp.149-163
• /
• 2023

Due to the continuous growth of the E-commerce market, the volume of orders that fulfillment centers have to process has increased, and various customer requirements have increased the complexity of order processing. Along with this trend, the operational efficiency of fulfillment centers due to increased labor costs is becoming more important from a corporate management perspective. Using historical performance data as training data, this study focused on real-time box recommendations applicable to packaging areas during fulfillment center shipping. Four types of data, such as product information, order information, packaging information, and delivery information, were applied to the machine learning model through pre-processing and feature-engineering processes. As an input vector, three characteristics were used as product specification information: width, length, and height, the characteristics of the input vector were extracted through a feature engineering process that converts product information from real numbers to an integer system for each section. As a result of comparing the performance of each model, it was confirmed that when the Gradient Boosting model was applied, the prediction was performed with the highest accuracy at 95.2% when the product specification information was converted into integers in 21 sections. This study proposes a machine learning model as a way to reduce the increase in costs and inefficiency of box packaging time caused by incorrect box selection in the fulfillment center, and also proposes a feature engineering method to effectively extract the characteristics of product specification information.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.13 no.3
• /
• pp.661-668
• /
• 2018

Biomedical signals using skin resistance have different characteristics according to stress diseases. Biological diagnostic devices for diagnosing stress diseases have been developed by using these characteristics, and devices have been developed so that the signals measured by the skin storage meter can be easily analyzed. Experts in the field will look directly at the output signal to determine the likelihood of any stress disorder. However, it is very difficult for a person to accurately determine whether a person to be measured has a stress disorder by analyzing a bio-signal measured by each person to be measured, and the result of the judgment is very likely to be wrong. In order to solve these problems, we implemented the function of determining the signal of a stress disorder by using the machine learning technique. SVM was used as a classification method in consideration of low computing ability of measurement equipment. Training data and test data were randomly generated for each disease using error range 5 based on 13 diseases. Simulation results showed more than 90% decision accuracy. In the future, if the measurement equipment is actually applied to the patients, we can retrain the classifier with the newly generated data.