• Journal of Bio-Environment Control
• /
• v.10 no.4
• /
• pp.225-231
• /
• 2001

This study was conducted to examine effect of different environment conditions in glass, PC, PET and PE greenhouses controlled by different environment control systems on the growth of green pepper. Light transmittance of 64.7% in the glass greenhouse was the highest among different green-houses. Air temperature was the highest in the glass greenhouse when ventilators were closed, and was the highest in the PE greenhouse when ventilators were open. Air relative humidity was the highest in the PE greenhouse during 24 hours. The amount of solar energy accumulated in soil was the greatest in the glass greenhouse and this energy released during the night escaped through covering materials. Latent heat and solar energy affected air temperature increased in greenhouses. The air temperature of glass greenhouse was 27.5$^{\circ}C$ at 11 O clock, which was the highest air temperature among the all greenhouse types. Clear differences were observed in leaf area and plant height at 30 days after transplanting. Days to first flowering was the shortest in the glass greenhouse with 72.7 days. Flower shedding was the greatest in the PE greenhouse with 12.6%. Days to fruit harvesting was the shortest in the glass greenhouse with 14.3 days. Fruit quality, such as fruit length, fruit diameter, fruit flesh thickness, and vitamin C content, was the best in the glass greenhouse. Percent marketable fruits was the highest with 95.3% when the pepper was grown hydroponically in the glass greenhouse.

• Applied Biological Chemistry
• /
• v.33 no.2
• /
• pp.125-128
• /
• 1990

Previous work has shown that the levels of free and total IAA and tryptophan decrease on exposing etiolated pea (Pisum sativum L. var. Sparkle) seedlings grown at $25^{\circ}C$ to $5^{\circ}C$ for 3 days, suggesting that low temperature down-regulates the level of endogenous IAA, in part, by reducing tryptophan biosynthesis. To understand, in this study, the effect of low temperature on the regulation of IAA degradation system in etiolated pea seedlings, enzyme levels of IAA degradation system and hydrogen peroxide content were analyzed during and after chilling($5^{\circ}C$) 6-day-old pea seedlings grown at $25^{\circ}C$. The levels of IAA oxidase and peroxidase increased during chilling and gradually restored to the level of control on termination of chilling. Catalase levels decreased upon chilling and increased to the level of control on termination of chilling. $H_2O_2$ was accumulated during chilling up to the level of $5.5\;{\mu}mol/g$ fresh weight while at $25^{\circ}C$ maintained a relatively constant $H_2O_2$ level of $4\;{\mu}mol/g$ FW. All together, it appears that low temperature, in part, by increasing enzyme levels of IAA degradation system and accumulating $H_2O_2$, down-regulates endogenous level of IAA in etiolated pea shoots.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.323-323
• /
• 2013

High power light-emitting diodes (LEDs) are widely used in many device applications due to its ability to operate at high power and produce high luminance. However, releasing the heat accumulated in the device during operating time is a serious problem that needs to be resolved to ensure high optical efficiency. Ceramic or Aluminium base metal printed circuit boards are generally used as integral parts of communication and power devices due to its outstanding thermal dissipation capabilities as heat sink or heat spreader. We investigated the characterisation of electroless plating of Ni-B film according to plating bath temperature, ranging from $50^{\circ}C$ to $75^{\circ}C$ on Ag paste/anodised Al ($Al_2O_3$)/Al substrate to be used in metal PCB for high power LED packing systems. X-ray diffraction (XRD), Field-Emission Scanning Electron Microscopy (FE-SEM) and X-ray Photoelectron Spectroscopy (XPS) were used in the film analysis. By XRD result, the structure of the as deposited Ni-B film was amorphous irrespective of bath temperature. The activation energy of electroless Ni-B plating was 59.78 kJ/mol at the temperature region of $50{\sim}75^{\circ}C$. In addition, the Ni-B film grew selectively on the patterned Ag paste surface.

• Nuclear Engineering and Technology
• /
• v.44 no.5
• /
• pp.551-560
• /
• 2012

The Wolsong-1 (W-1) Phase-B pre-simulations were carried out in preparation for tests to be conducted for the restart of the reactor after a major refurbishment project that included replacement of the pressure tube. These pre-simulations for Wolsong-1 Phase-B differ from those in the past that were performed for the Wolsong-1,2,3,4 tests in that these tests use the WIMS/DRAGON/RFSP-IST code suite for verification of the tests and gadolinium instead of the traditional PPV/MULTICELL/RFSP code system and boron as poison in the moderator system. The use of gadolinium is deemed not to have domestically accumulated experience gained from the previous Phase-B tests. Thus, it is appropriate to conduct a study in order to gain a correct understanding and interpretation of potential differences in test results stemming from using gadolinium rather than boron. Although the calibration of the reactivity device will not be noticeably different using boron and gadolinium at a constant moderator temperature, the temperature dependency of the neutronic behavior due to the presence of gadolinium in the moderator system might be pronounced. The results of the pre-simulations using gadolinium revealed that the moderator temperature reactivity coefficients indeed showed significant differences in comparison with those with boron. In order to secure the validity of the analysis results, the newly acquired WIMS/DRAGON/RFSP-IST code suite was verified against the W-2,3,4 Phase-B test results. The results of the new code suite verifications revealed some overall improvements in accuracy; justification of the use of the code can be claimed for the validation of the W-1 Phase-B test results.

• 한국생물공학회:학술대회논문집
• /
• 2003.04a
• /
• pp.116-120
• /
• 2003

Type strain, Methylosinus trichosporium OB3b, was used to convert methane to methanol. To prevent further oxidation of methanol, NaCl and EDTA were used as inhibitors of methanol dehydrogenase. The reaction temperature was $25^{\circ}C$, and the concentrations of cell and sodium formate added to the reaction mixture were 0.6 mg dry cell wt/ml and 20 mM, respectively. During 12hr reaction, 8 mM methanol was accumulated in the reaction mixture. In this reaction $K_m$ and $V_{max}$ values were found to be 532.6 mM and 1.749 mmol/hr, respectively, and the conversion rate was approximately 37%. To increase the concentration of methanol in the medium, a repeated batch reaction was carried out. In this process, methane was injected every eight hours, and the produced methanol concentration was 18 mM.

• 한국신재생에너지학회:학술대회논문집
• /
• 2005.06a
• /
• pp.609-614
• /
• 2005

Gas hydrates are ice-l ike sol id compounds that are composed of water and natural gas. All common gas hydrates belong to the three crystal structures that are composed of five polyhedral cavities formed by hydrogen bonded water molecules and stable in specific high pressure and low temperature conditions. Gas hydrates contain large amounts of organic carbon and widely occur in deep oceans and permafrost regions, and they may therefore represent a potential energy resource in the future. United States and Japan perform the national R&D programs for the commercial production of gas hydrates in 2010's. The study on gas hydrates are also important for exploration and development of natural gas in the regions where gas hydrates are accumulated and could be formed. Although their global abundance is debated, they play an important role in global climate change since methane is a 50 times more effect ive greenhouse gas than carbon dioxide. Natural gas hydrates also form a possible natural hazard if rapidly dissociated and can cause slides and slumps and in the marine environment associated tsunamis.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2003.05a
• /
• pp.84-87
• /
• 2003

Microstructural evolution and dry sliding wear behavior of ultra-fine grained 5052 Al alloy obtained by an accumulative roll-bonding process have been investigated. After 7 ARB cycles, ultra-fine grains with large misorientations between neighboring grains were obtained. The grain size was about 0.2$\mu\textrm{m}$. The hardness, tensile and yield strengths of the ultra-fine grained alloy increased as the amount of accumulated strain increased with the ARB cycles. Sliding wear teats of the ultra-fine grained 5052 Al alloy were conducted at room temperature. Wear rate of the ultra-fine grained alloy increased in spite of the increase of hardness. Surfaces of the worn specimens were examined with SEM to investigate wear mechanism of the ultra-fine grained alloy.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2003.05a
• /
• pp.813-816
• /
• 2003

The dielectric breakdown of epoxy composites used for transformers was experimented and then its data were applied to Weibull distribution probability. First of all, speaking of dielectric breakdown properties, the more hardener increased, the stronger breakdown strength became at low temperature because of cross-linked density by the virtue of ester radical. The breakdown strength of specimens with filler was lower than it of non-filler specimens because it is believed that the adding filler forms interface and charge is accumulated in it, therefore the molecular motility is raised and the electric field is concentrated. In the case of filled specimens with treating silane, the breakdown strength become much higher. Finally, according to Weibull distribution analysis, reducing breakdown probability of equipment insulation lower than 0.1 % level requires the allowable field intensity values to be kept under 21.5 MV/cm.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2007.05a
• /
• pp.924-927
• /
• 2007

In this study, adaptation of two-way shape memory effect of SMA wire to the actuator is examined. Therefore the SMA characteristics which are training, material properties, response time at different thermal cycling rates are tested. During training, permanent deformation is accumulated till a certain number of cycle and then saturated. The amount of two-way strain is unchangeable over all cycle and the slope of strain(or stress)-temperature curve is slower as the increase of applied stress. The rate effect is observed resulted from the thermal distribution which heating profile differs from cooling as thermal cycling time. Using the estimated SMA properties, an experimental test for the simple smart wing is performed.

• Journal of Microbiology and Biotechnology
• /
• v.17 no.1
• /
• pp.104-109
• /
• 2007

Lactic acid bacteria that accumulated ${\gamma}-aminobutyric$ acid (GABA) in culture medium were screened to identify strains with high GAB A-producing ability. One strain, MS, which was isolated from kimchi, showed the highest GABA-producing ability among the screened strains. MS was identified as Lactobacillus buchneri based on Gram-staining, metabolic characteristics, and 16S rDNA sequence determination, Optimum culture conditions for GABA production were determined: MRS broth containing 5% MSG, 1% NaCl, and 1% glucose, at an initial pH of 5.0, the incubation temperature at $30^{\circ}C$ for 36 h. Under these conditions, MS produced GABA at a concentration of 251 mM with a 94% GABA conversion rate. Moreover, culture extracts of Lb. buchneri MS partially or completely protected neuronal cells against neurotoxicantinduced cell death.