• 제목/요약/키워드: Accumulated temperature

검색결과 553건 처리시간 0.029초

Extension Test of Midday Apparent Evapotranspiration toward Daily Value Using a Complete Remotely-Sensed Input

  • Han, Kyung-Soo;Kim, Young-Seup
    • 대한원격탐사학회지
    • /
    • 제19권5호
    • /
    • pp.341-349
    • /
    • 2003
  • The so-called B-method, a simplified surface energy budget, permits calculation of daily actual evapotranspiration (ET) using remotely sensed data, such as NOAA-AVHRR. Even if the use of satellite data allows estimation of the albedo and surface temperature, this model requires meteorological data measured at ground-level to obtain the other inputs. In addition, a difficulty may be occurred by the difference of temporal scales between the net radiation in daily scale and instantaneous measurement at midday of the surface and air temperatures because the data covered whole day are necessary to obtain accumulated daily net radiation. In order to solve these problems, this study attempted a modification of B-method through an extension of hourly ET value calculated using a complete instantaneous inputs. The estimation of the daily apparent ET from newly proposed system showed a root mean square error of 0.26 mm/day as compared the output obtained from the classical model. It is evident that this may offer more rapid estimation and reduced data volume.

적산온도 방법을 활용한 초지연 모르타르의 응결특성 고찰 (Setting Time of Super-Retarding Mortar Applying Maturity)

  • 한수환;임군수;현승용;윤치환;한민철;한천구
    • 한국건축시공학회:학술대회논문집
    • /
    • 한국건축시공학회 2021년도 봄 학술논문 발표대회
    • /
    • pp.229-230
    • /
    • 2021
  • This study is conducted to identify the setting time of mortar mixed with super retarding agent as a series of studies to predict setting time based on the equivalent age method. The experimental results showed that mixing super-retarding agents did not adversely affect the quality of mortar, and the equivalent age calculation showed similar results regardless of curing temperature.

  • PDF

토양(土壤)pH가 상이(相異)한 몇가지 연초경작지(煙草耕作地) 토양(土壤)에서 질산화작용(窒酸化作用)에 대한 온도효과(溫度效果) 및 NO3-N와 잎담배 생산성(生産性)과의 상호관계(相互關係) (Temperature Effect on Nitrification and Interrelationship between Nitrifiable NO3-N and Tobacco Productivity in Some Tobacco Tillage Soils with Different Soil pH)

  • 홍순달;정훈채;이윤환;김재정
    • 한국토양비료학회지
    • /
    • 제22권4호
    • /
    • pp.290-295
    • /
    • 1989
  • 토양(土壤)pH가 강산성(强酸性)에시 약(弱)알카리성(性)의 분포(分布)를 갖는 8개연초경작지토양종류(個煙草耕作地土壤種類), 고평통(진천, pH4.51), 예산통(진천, pH4.54), 지곡통(음성, pH4.71), 송산통(괴산, pH5.01), 안계통(성주, pH5.34), 반호통(성주, pH5.73), 원곡통(진천, pH5.93) 및 반호통(성주, pH7.70) 등(等)에 대하여 토양수분함양(土壤水分含量)을 최대용수양(最大容水量)의 60%, 배양온도(培養溫度)를 $15^{\circ}C$$25^{\circ}C$로 하고 질소무첨가(窒素無添加)와 질소첨가(窒素添加)(연초용복합비료(煙草用複合肥料), 10-10-20, 200mgN/g 첨가(添加))로 구분(區分)하여 8주간(週間) 배양(培養)하고 질산화작용(窒酸化作用)에 대(對)한 토양(土壤)pH 및 온도효과(溫度效果)를 조사(調査)하였다. 또한 배양후(培養後) 축적(蓄積)된 $NO_3-N$함양(含量)과 무비구(無肥區)잎담배수양(收量)과의 상호관계(相互關係)를 검토(檢討)한 결과(結果)는 다음과 같다. 1. 배양온도(培養溫度)에 따른 질산화작용(窒酸化作用)은 토양종류(土壤種類)에 따라 다양(多樣)한 양상을 나타냈으며 대부분(大部分) $25^{\circ}C$조건(條件)이 $15^{\circ}C$조건(條件)보다 현저하게 양호(良好)하였고 배양온도간(培養溫度間) 차이(差異)는 배양(培養) 2주후(週後)부터 뚜렷하였으며 토양(土壤)pH가 증가(增加)할수록 적어지는 경향이었다. 2. 배양(培養) 2주(週) 및 4주후(週後)에 축적(蓄積)된 순(純)$NO_3-N$함양(含量)(N첨가구(添加區)-N무첨가구(無添加區))은 각각(各各)의 배양온도조건(培養溫度條件)에서 토양(土壤) pH 증가(增加)에 따라 증가(增加)되는 정(正)의 상관(相關)을 나타냈다. 3. 토양(土壤)의 질소공급능력(窒素供給能力)을 평가(評價)하기 위한 질소유효도(窒素有效度) 지표(指標)로 이용(利用)되고 있는 배양(培養) 2주후(週後) 축적(蓄積)된 $NO_3-N$ 및 순(純)$NO_3-N$함량으로 무비구(無肥區)잎담배수양(收量)과의 상호관계(相互關係)를 검토(檢討)한 결과(結果) 본포이식후(本圃移植後) 초기생육단계(初期生育段階)의 근권토양온도(根圈土壤溫度)와 비슷한 $15^{\circ}C$조건(條件)은 최적온도(最適溫度)인 $25^{\circ}C$조건(條件)보다 더 밀접한 상관(相關)을 나타냈다.

  • PDF

전부도재 수복을 위한 무색지르코니아 세라믹의 저온열화에 따른 굴곡강도 변화 (The flexural strength Changes by the Low Temperature Degradation of Uncolored zirconia Ceramic for All Ceramic Restoration)

  • 김정숙
    • 대한치과기공학회지
    • /
    • 제31권2호
    • /
    • pp.39-44
    • /
    • 2009
  • In the orthopedic field which firstly used zirconia as artificial joints, researchers had studied the reasons for collapsing zirconia used as restorative material by accumulated inner cracks in several years and they found out Low Temperature Degradation is one of the reasons. In the dentistry field, it has not been too long since they used zirconia as the cores of all-ceramic restoration; however, the study is needed as prophylactic measure against Low Temperature Degradation which can be caused by saliva wetting the mouth all the time and frictional forces such as bite pressure and masticatory pressure. Artificial aging by autoclaving is used because there are difficulties of testing in the patient's mouth. To study the changes in the material properties, the flexural strength of dental zirconia ceramic is measured before and after the test. The following are the result of the test. 1) The zirconia blocks in the autoclaves at $130^{\circ}C$ and $200^{\circ}C$ are phase-shifted tetragonal to monoclinic by Low Temperature Degradation. 2)The non-autoclaved specimens have the average fractural strength of 1346.4MPa, the specimens autoclaved at $130^{\circ}C$ have 1226.4Mpa and the specimens autoclaved at $200^{\circ}C$ have 1024.1MPa. The tests show that as the temperature increases, the flexural strength tend to decrease and the differences are noticeable(p<0.001). 3)Through the Duncan's post-hoc test, the differences in flexural strength of the 3 groups were listed in order of strength like normal temperature>at $130^{\circ}C$ autoclave low temperature degradation> at $200^{\circ}C$ autoclave low temperature degradation.

  • PDF

콘크리트구조물의 반복적 동결융해에 대한 수치 해석적 열화 예측 및 신뢰성 모델 개발 (Development of Deterioration Prediction Model and Reliability Model for the Cyclic Freeze-Thaw of Concrete Structures)

  • 조태준;김이현;조효남
    • 콘크리트학회논문집
    • /
    • 제20권1호
    • /
    • pp.13-22
    • /
    • 2008
  • 다공성 시스템 내부 동결체의 생성과 성장은 온도경사와 화학적 에너지뿐만 아니라 열 물리학적 영향과 이동 물질에 의해서도 영향을 받는다. 더욱이 융해 화학물질의 확산율은 반복적인 동경융해 환경 하에서 매우 높은 값을 나타낸다. 결과적으로 콘크리트구조물의 열화는 해양환경과, 높은 고도 및 북쪽 지방에서 특히 크게 발생된다. 그러나 균열 성장과 누적된 손상에 의한 열화를 동반한 동결융해의 특성은 실험을 통해서 추정하기가 곤란하다. 이러한 손상을 예측하기 위해서 응답면기법 (RSM)을 이용한 회귀분석법을 사용하였다. 콘크리트구조물에서 반복되는 동결융해로 인한 열화의 주요 변수인 물-시멘트비, 연행공기, 동결융해의 반복 횟수 등은 응답면기법의 한계상태방정식을 구성하는데 중요한 입력 변수로 사용되었다. 누적변형률, 상대동탄성계수, 또는 등가 소성변형과 같은 주요한 열화 변수에 대한 회귀방정식은 열화된 구조물의 성능을 평가할 수 있다. 300번의 동결융해 반복 후의 상대동탄성계수와 잔류변형의 결과는 실험 결과와 매우 유사한 경향을 나타내었다. 응답면기법의 결과는 설계 시 한계값에 대한 초과 확률을 예측하는데 사용되어질 수 있다. 그러므로 개발된 예측 기법을 활용하여 반복적인 동결융해에 의해서 누적 손상을 받는 콘크리트구조물의 생애주기 관리에 사용될 수 있다.

담수 처리에 따른 잡초성벼의 출현 변화 (Emergence Characteristics of Weedy Rice under Flooding depth)

  • 황운하;정재혁;이현석;박태선;양서영;최인배;최경진
    • Weed & Turfgrass Science
    • /
    • 제7권3호
    • /
    • pp.171-179
    • /
    • 2018
  • 국내에서 수집되어 농업유전자원센터에 기탁된 잡초성벼 유전자원 중 100점을 이용하여 토양 매몰 깊이, 담수 처리 깊이 및 기간, 생육 온도에 따른 출현율을 분석하고 출현하지 못하고 토양 속에 존재하는 종자를 회수하여 종자 상태를 분석하였다. 토양 매몰 깊이가 1 cm로 얕을 시 담수 깊이 5 cm 및 10 cm 처리에서 출현율이 각각 54, 57% 감소하였으며, 토양 매몰 깊이가 5 cm 깊어지면서 담수 처리에 따른 출현율 감소는 담수 5 cm, 10 cm에서 66, 84%로 크게 증가하였다. 잡초성벼 유전자원 별 담수 처리에 따른 출현율 변화를 분석한 결과, 토양매몰깊이 1 cm 및 담수 깊이 5 cm에서는 대부분의 유전자원이 60% 이하의 출현율을 보였으며, 토양매몰깊이 5 cm 및 담수 깊이 5 cm에서는 출현율은 크게 감소하여 94%의 유전자원이 10%이하의 출현율을 나타내었다. 출현이 완료된 뒤 출현하지 않고 토양 속에 남아있는 종자를 회수하여 종자 상태를 분석한 결과, 토양 매몰 깊이가 5 cm 일 시, 담수 처리에 의해 발아는 하였지만 출현하지 못하는 비율이 증가한 반면 죽거나 소멸된 종자의 비율은 감소하였다. 생육 온도를 달리하여 담수 처리 기간 동안의 유효 적산 온도에 따른 종자의 변화를 분석한 결과, 출현율은 유효 적산 온도와 유의한 상관관계를 보이지 않았으나 종자 사멸율 및 발아/미출현율은 유효 적산온도에 따라 증가, 감소하는 경향이었다. 담수 처리에 따른 출현율 변화는 담수 처리 온도 보다는 담수 처리 기간에 따른 차이가 컸으며 담수 처리 기간이 21일 이상일 시 출현율이 크게 감소하였다.

기후변화에 따른 농업용수공급패턴의 변화로 인한 이수안전도변화분석 (Water Supply Reliability Revaluation For Agricultural Water Supply Pattern Changes Considering Climate Changes)

  • 최영돈;안종서;신현석;차형선
    • 한국수자원학회:학술대회논문집
    • /
    • 한국수자원학회 2010년도 학술발표회
    • /
    • pp.273-277
    • /
    • 2010
  • This research was performed to examine changes in the timing of the growth of crops along with changes in temperatures due tochanges and to analyze the change of water-supply-reliability by adding an analysis of the change of agricultural water supply patterns in the basin area of Miryang dam in Korea. Had-CM3 model from U.K. was the tool adopted for the GCM model, a stochastic, daily-meteorology-generation-model called LARS-WG was alsoused for downscaling and for the climate change scenario (A1B) which represents Korea's circumstances best. First of all, to calculate changes in the timing of the growth of crops during this period, the theory of GDD was applied. Except for the period of transplanting and irrigation, there was no choice but to find the proper accumulated temperature by comparing actual temperature data and the supply pattern of agricultural use due to limited temperature data. As a result, proper temperatures were found for each period. $400^{\circ}C$ for the preparation period of a nursery bed, $704^{\circ}C$ for a nursery bed's period, $1,295^{\circ}C$ for the rice-transplanting period, $1,744^{\circ}C$ for starting irrigation, and $3,972^{\circ}C$ for finishing irrigation. To analyze future agricultural supply patter changes, the A1B scenario of Had-CM3 model was adopted, and then Downscaling was conducted adopting LARS-WG. To conduct a stochastical analysis of LARS-WG, climate scenarios were generated for the periods 2011~2030, 2046~2065, 2080~2099 using the data of precipitation andMax/Min temperatures collected from the Miryang gauging station. Upon reviewing the result of the analysis of accumulated temperatures from 2011~2030, the supply of agricultural water was 10 days earlier, and in the next periods-2046~2065, 2080~2099 it also was 10 days earlier. With these results, it is assumed that the supply of agricultural water should be about 1 month ahead of the existing schedule to meet the proper growth conditions of crops. From the results of the agricultural water supply patterns should be altered, but the reliability of water supply becomes more favorable, which is caused from the high precipitation change. Furthermore, since the unique characteristics of precipitation in Korea, which has high precipitation in the summer, water-supply-reliability has a pattern that the precipitation in September could significantly affect the chances of drought the following winter and spring. It could be more risky to make changes to the constant supply pattern under these conditions due to the high uncertainty of future precipitation. Although, several researches have been conducted concerning climate changes, in the field of water-industry, those researches have been solely dependent on precipitation. Even so, with the high uncertainty of precipitation, it is difficult for it to be reflected in government policy. Therefore, research in the field of water-supply-patterns or evapotranspiration according to the temperature or other diverse effects, which has higher reliability on anticipation, could obtain more reliable results in the future and that could result in water-resource maintenance to be safer and a more advantageous environment.

  • PDF

단순 퍼지 제어기법을 이용한 온실의 천창환기에 의한 냉방제어 (Cooling Control of Greenhouse Using Roof Window Ventilation by Simple Fuzzy Algorithm)

  • 민영봉;윤용철;허무룡;강동현;김현태
    • 농업생명과학연구
    • /
    • 제44권4호
    • /
    • pp.69-77
    • /
    • 2010
  • 온실의 환기제어시 외기온도와 풍속변화에 보다 유연하게 대처하면서 온실내 온도제어성능을 향상시키기 위해서 퍼지제어가 많이 이용되고 있지만, 제어로직이 복잡하여 대용량 메모리를 갖는 컨트롤러가 필요하다. 본 연구에서는 소용량의 마이크로 컨트롤러에서 프로그램이 가능한 단순퍼지제어 알고리즘을 개발하여 시험하였다. 개발한 단순퍼지 제어 알고리즘의 성능을 비교하기 위하여 기존의 스텝제어 알고리즘을 도입한 제어프로그램으로 온실의 천창환기에 의한 온도제어를 실시하여 두 알고리즘의 성능을 직접 비교하고, 또 PID 및 표준 퍼지제어 성능과는 기존의 연구 결과와 비교하여 상대적 성능을 평가하므로써 온실의 환기냉방제어의 유리한 제어기법을 확립할 수 있는 기초자료를 얻고자 수행하였다. 단순 퍼지제어에 의한 실내온도 최대 제어오차는 $1.2^{\circ}C$, 1시간동안의 평균환기창 적산열림량과 조작회수는 각각 84%, 13회로 나타났으며, 문헌조사에 의한 퍼지제어에서 각각 $1.3^{\circ}C$, 75% 및 12회에 비해 동등한 제어성능을 보였다. 본 연구에서 개발한 단순퍼지제어는 제어로직이 PID제어보다 단순함에도 불구하고 스텝제어와 PID제어보다 성능이 우수하고, 퍼지제어와 동등한 제어성능을 갖는 것으로 나타났다.

경화공정 및 수분흡수에 따른 복합재료 하니콤 샌드위치 판넬의 접합강도특성 연구 (Bondline Strength Evaluation of Honeycomb Sandwich Panel For Cure Process and Moisture Absorption)

  • 최흥섭;전흥재;남재도
    • 대한기계학회논문집A
    • /
    • 제25권1호
    • /
    • pp.115-126
    • /
    • 2001
  • In this paper, through a series of comparative experiments, effects of two different cure processing methods, cocure and precure, on the mechanical properties of honeycomb core materials for aircraft applications are considered. Mass of moisture accumulated into the closed cells of the sandwich panel specimen from the measured mass of moisture diffused to the full saturation state into the elements(skin, adhesive layer, Nomex honeycomb), consisting the honeycomb sandwich specimen has been calculated. Water reservoir of 70$\^{C}$ was used to have specimens absorb moisture to see the influence of moisture absorbed into sandwich panel on its mechanical properties. For the repair condition holding for 2 hours at 177$\^{C}$(350℉) temperature, a pressure due to the vapor expansion in each cell of the sandwich panel, which may result in the local separation of the interface between laminated skin and the surface of the honeycomb, has been estimated by vapor pressure-temperature relation from the thermodynamic steam table and compared to the pressure from the ideal gas state equation. The bonding strengths of the laminated skins on the flat surface of the Nomex honeycomb have been compared by the flatwise tension test and climbing drum peel test performed at room temperature for dry, wet and wet-repair specimens, respectively.

전자빔 조사 폴리머의 전자 분포의 축퇴 과정 (Decay Process of Charge Distribution in E-beam Irradiated Polymers)

  • 최용성;김형곤;황종선;이경섭
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2008년도 춘계학술대회 논문집 센서 박막재료연구회 및 광주 전남지부
    • /
    • pp.69-72
    • /
    • 2008
  • Decay processes of accumulated charge in e-beam irradiated polymers during elevating temperature are observed using pulsed electro-acoustic measurement system. Since the polymeric materials have many superior properties such as light-weight, good mechanical strength, high flexibility and low cost, they are inevitable materials for spacecrafts. In space environment, however, the polymers sometimes have serious damage by irradiation of high energy charged particles. When the polymers of the spacecraft are irradiated by high energy charged particles, some of injected charges accumulate and remain for long time in the bulk of the polymers. Since the bulk charges sometimes cause the degradation or breakdown of the materials, the investigation of the charging and the decay processes in polymeric materials under change of temperature is important to decide an adequate material for the spacecrafts. By measuring the charge behavior in e-beam irradiated polymer, such as polyimide or polystyrene, it is found that the various accumulation and decay patterns are observed in each material. The results seem to be useful and be helpful to progress in the reliability of the polymers for the spacecraft.

  • PDF