• The KIPS Transactions:PartC
• /
• v.14C no.7
• /
• pp.597-602
• /
• 2007

In conventional cooperative communication data rate is 1/2 than non cooperative protocols. In this paper, we propose a full data rate DF (Decode and Forward) cooperative transmission scheme. Proposed scheme is based on time division multiplexing (TDM) channel access. When DF protocol has full data rate, it can not obtain diversity gain under the pairwise error probability (PEP) view point. If it increases time slot to obtain diversity gain, then data rate is reduced. The proposed algorithm uses orthogonal frequency and constellation rotation to obtain both full data rate and diversity order 2. Moreover, performance is analyzed according to distance and optimized components that affect the system performance by using computer simulation. The simulation results revealed that the cooperation can save the network power up to 7dB over direct transmission and 5dB over multi-hop transmission at BER of $10^{-2}$. Besides, it can improve date rate of system compared with the conventional DF protocol.

• KIPS Transactions on Computer and Communication Systems
• /
• v.6 no.9
• /
• pp.369-376
• /
• 2017

Recently, an RSSI-based fingerprinting localization technology has been widely used in indoor location-based services. In the conventional fingerprinting method, as many APs as possible are used to increase the accuracy of location estimation. In another study, a part of APs having the strongest RSSI signal intensity are selected and used to reduce the time spent for positioning. However, it does not reflect the influence of RSSI occurred from the changes of the surrounding environments such as human movement or moving obstacles in a real environment. The environmental changes may cause the difference between the predicted RSSI signal strength value and the measured value, and thus occur an unpredictable error in the position estimation. Therefore, in order to mitigate the error caused by environmental factors, it is necessary to select APs suitable for indoor positioning estimation considering the changes in the surrounding environments. In this paper, we propose a method to select stable APs considering the influence of surrounding environments and derive a suitable positioning algorithm. In addition, we compare and analyze the performance of the proposed method with that of the existing AP selection methods through experiments.

• Journal of Aerospace System Engineering
• /
• v.10 no.4
• /
• pp.98-104
• /
• 2016

This research describes the functional requirements of anti-ship ballistic missile (ASBM) defense systems, which depend on the threat characteristics of the ASBM. Recently, China has carried out a training launch of the DF-21D strategic countermeasures for the placement of Korean terminal high-altitude air defense (THAAD). The ASBM is being used as a primary means of attacking aircraft carriers, using an anti-access/area denial (A2/AD) strategy. Considering the missile technology connection between China and North Korea, there is a very high probability that North Korea already owns an ASBM. From this point of view, work with Aegis operational concepts provided implications for an ASBM threat. Utilizing quality function deployment (QFD) based on the operational concepts, the functional requirement were calculated.

• Journal of the Korea Society for Simulation
• /
• v.27 no.2
• /
• pp.91-100
• /
• 2018

Recently, the traditional call center, which has an important role as the customer's primary contact point, has been transformed into the omni-channel contact center which supports an additional variety of access channels in addition to phone calls in order to improve customer accessibility and convenience. The omni-channel contact center has agents on each channel which are vital in determining the response rate and waiting time for the customer. In traditional call centers, agents can be assigned to a call based on the characteristics of the call, however in omni-channel contact centers, the characteristics of issues vary and come in through multiple channels, each with their own characteristics, making it difficult to assign the appropriate agent for the issue. Customers must also be processed at the same time, adding an additional layer of complexity to the issue. This paper analyzes and simulates an omni-channel contact center that accommodates email, chat, voice calls and video consultation, and investigates how to optimize the allocation of agents.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.52 no.1
• /
• pp.40-47
• /
• 2015

We propose a method to provide a selective VoD service during live streaming sessions. In the proposed method, each peer joined the live streaming session receives video stream packets with P2P manner and stores the packets to provide a VoD service. To mitigate the overhead of each peer node to store the video stream packets, the proposed scheme categorizes peers into three different groups based on their link types. To increase data gathering speed and reduce the network load, we also proposes the P2P transmission scheme within the same AP network for the peers with Wi-Fi link. To evaluate the performance of the proposed method, we implement computer simulator using NS-3. Simulation results show that the proposed method reduces the overhead about 66% and increases the P2P data gathering speed about 50% compared to the conventional schemes.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.48 no.3
• /
• pp.60-67
• /
• 2011

Visible light communication system transmits data by controlling light emission of LED and receives data through photo detecter, which is considered as one of strong candidates of next generation wireless communication systems. The transmission capacity of visible light communication system depends on light intensity emitted from LED, sensitivity of PD, distance between transmitter and receiver, angle of incidence at the receiver. In particular, the receiver's vertical and horizontal movement changes distance between transmitter and receiver and angle of incidence, which may degrades transmission capacity of system. In this paper, we propose an estimation algorithm of receiver's position and angle based on tracking of received light intensity for indoor visible light communication systems. The performance evaluation of proposed algorithm confirms that the estimation algorithm of receiver's position and angle is quite important for visible light communication system to improve its transmission capacity.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.17 no.4
• /
• pp.159-167
• /
• 2018

In this paper, we propose an algorithm to optimize energy efficiency in a multi-user decoupled RF energy harvesting network and experiment on the trend of energy efficiency change assuming users' various geographical distribution scenarios. In the RF energy harvesting network where both wireless data transmission and RF energy harvesting are simultaneously performed, the energy efficiency is a key indicator of network performance, and it is necessary to investigate how various factors can affect the energy efficiency. In order to increase energy efficiency effectively, we can confirm that users' distributions are important factors in the RF energy harvesting network from the simulation results.

• International journal of advanced smart convergence
• /
• v.6 no.1
• /
• pp.76-81
• /
• 2017

This paper presents a low cost and flexible IoT enabled smart LED controller using Arduino that is used for emergency exit signs. The Internet of Things (IoT) is become a global network that put together physical objects using network communications for the purpose of inter-communication of devices, access information on internet, interaction with users as well as permanent connected environment. A crucial point in this paper, is underlined on the potential key points of applying the Arduino platform as low cost, easy to use microcontroller with combination of various sensors applied in IoT technology to facilitate and establishment of intelligent products. To demonstrate the feasibility and effectiveness of the system, devices such as LED strip, combination of various sensors, Arduino, power plug and ZigBee module have been integrated to setup smart emergency exit sign system. The general concept of the proposed system design discussed in this paper is all about the combination of various sensor such as smoke detector sensor, humidity, temperature sensor, glass break sensors as well as camera sensor that are connected to the main controller (Arduino) for the purpose of communicating with LED exit signs displayer and dedicated PC monitors from integrated system monitoring (controller room) through gateway devices using Zig bee module. A critical appraisal of the approach in the area concludes the paper.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.9 no.6
• /
• pp.75-87
• /
• 2009

It is difficult to support QoS service in existing MAC Protocols in Wireless Mesh Network environments. while DCF can not support QoS, EDCA is operated with prioritized channel access method but can not give full performance. This thesis proposes frame management method to support QoS in Multi-Media DCF(MMDCF) MAC Protocol working in wireless mesh network. MMDCF uses ACH phase in TDMA frame to perform selection and elimination. Prioritized phases's count m and Fair Elimination phases's count n determine contention level and make string probability to only one win the contention. Forced TDMA Frame release method can support QoS requirements. MMDCF results good performance and good channel efficiency to support QoS requirements better than EDCA in multimedia stream environments.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.12C
• /
• pp.1288-1296
• /
• 2006

This paper proposes a fast authentication scheme based on hierarchical key structure (HiFA) for roaming mobile nodes in both intra-domain and inter-domain. The full authentication procedure standardized in IEEE 802.11 and 802.16 is difficult to be applied to a handover since it needs a heavy operation and long delay time during a handover. Though a number of schemes were proposed to solve the problem, the existing schemes might degrade the security of authentication or impose heavy administrative burden on the Pome authentication server. The main contribution of this paper is to reduce the communication and computation overhead of the home authentication sewer without degrading the security strength of the fast roaming authentication using hierarchical authentication key structure. The proposed scheme iii this paper decentralizes the administrative burden of the home authentication server to other network entities such as a local authentication server or access point and supports the security separation of the authentication key among local authentication servers using hash key chain.