• KIPS Transactions on Computer and Communication Systems
• /
• v.5 no.10
• /
• pp.311-318
• /
• 2016

IoT(Internet of Things areas) rich information based on the user easy access to service creation must be one of the power system of specificity due following: The IoT spread obstacle to the act be, and 'Smart Grid information of this is not easy under power plants approach the Directive on the protection measures, particularly when stringent security policies IoT technologies applied to Advanced Metering Infrastructure sector has been desired. This is a situation that occurs is limited to the application and use of IoT technologies in the power system. Power Information Network is whilst closed network operating is has a smart grid infrastructure, smart grid in an open two-way communication for review and although information security vulnerabilities increased risk of accidents increases as according to comprehensive security policies and technologies are required and can. In this paper, the IoT platform architecture design of information systems as part of the power of research and development IoT-based energy information platform aims. And to establish a standard framework for a connection to one 'Sensor-Gateway-Network-platform sensors Service' to provide power based on the IoT services and solutions. Framework is divided into "sensor-gateway" platform to link information modeling and gateways that can accommodate the interlocking standards and handling protocols variety of sensors Based on this real-time data collection, analysis and delivery platform that performs the role of the relevant and to secure technology.

• Journal of Navigation and Port Research
• /
• v.43 no.6
• /
• pp.403-412
• /
• 2019

The characteristics of the manoeuvring motion of a ship are dependent on the ship type, as well as draft or speed in the same ship. In recent years, the number of extra-large vessels has increased significantly, which can cause enormous material and environmental damage in the event of a marine accident. Thus, the importance of ship maneuvering is increasing. The IMO has forced the officers to be trained in simulators through the STCW 95 amendment. However, FMSS is costly and difficult to access and the PC-based simulator has the disadvantage that only one person can engage in simulation. The purpose of this study was to solve the shortcomings of the FMSS and PC-based simulators by enabling multiple people to use their PCs to simulate based on a network. The simulator is implemented through the analysis and numerical calculation of the Nomoto model, Radar function mounting, data transfer protocol design, and GUI building. To verify the simulator, the simulation results were compared and analyzed with the test results of T.S. HANBADA according to the criteria of the Korean Register of Shipping(KR) and IMO standards for ship maneuverability. As a result, It showed a relative error of 0%~ 32.1% with an average of 13.7%, and it satisfied the IMO criteria for ship maneuverability.

• The KIPS Transactions:PartC
• /
• v.11C no.6 s.95
• /
• pp.799-806
• /
• 2004

A growing diversity of pervasive devices is gaming access to the Internet and other information. However, much of the rich multimedia contents cannot be easily handled by the client devices because of the limited communication, processing, storage and display capabilities. The in-tegration of voice, data and video service modified the target of networking technologies. Networks must have some the capabilities for in-tegration of various services and also for QoS support as required by each of those service. Because of these reasons, we developed EAGIS(Efficient ATM Gateway for real time Internet Service) to provide seamless multimedia service between the ATM network and the Internet. EAGIS consists of the interworking unit, content server, transcoding server, and the serveice broker to provide seamless multimedia service be-tween the ATM network and the Internet. In this paper, we design the architecture and transcoding service scenario of the EAGIS. When the RTP is used for the bi-directional communication, transcoding time is configured by the time-stamp of RTCP. When HTTP is used for unidirec-tional communication, self-timer is used. By using these reference time, standard transcoding method is applicable according to the frame trans-mission rate and network traffic load. And we can also assure the QoS of the multiple users` effective bandwidth by our algorithm.

• Journal of KIISE:Computing Practices and Letters
• /
• v.10 no.2
• /
• pp.134-145
• /
• 2004

With rapid growth in the amount of data transferred on the Internet, traditional storage systems have reached the limits of their capacity and performance. SAN (Storage Area Network), which connects hosts to disk with the Fibre Channel switches, provides one of the powerful solutions to scale the data storage and servers. In this environment, the maintenance of data consistency among hosts is an important issue because multiple hosts share the files on disks attached to the SAN. To preserve data consistency, each host can execute the disk I/O whenever disk read and write operations are requested. However, frequent disk I/O requests cause the deterioration of the overall performance of a SAN cluster. In this paper, we introduce a SANtopia global buffer manager to improve the performance of a SAN cluster reducing the number of disk I/Os. We describe the design and algorithms of the SANtopia global buffer manager, which provides a buffer cache sharing mechanism among the hosts in the SAN cluster. Micro-benchmark results to measure the performance of block I/O operations show that the global buffer manager achieves speed-up by the factor of 1.8-12.8 compared with the existing method using disk I/O operations. Also, File system micro-benchmark results show that SANtopia file system with the global buffer manager improves performance by the factor of 1.06 in case of directories and 1.14 in case of files compared with the file system without a global buffer manager.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.12B
• /
• pp.1050-1057
• /
• 2008

Wireless Mesh Networks (WMNs) have recently become a hot issue to support high link capacity in wireless access networks. The IEEE 802. I 1 standard which is mainly used for the network interface technology in WMNs supports up to 3 or 12 multiple channels according to the IEEE 802.11 specification. However, two important problems must be addressed when we design a channel assigmnent algorithm: channel dependency problem and channel scanning delay. The former occurs when the dynamic channel switching of an interface leads to the channel switching of other interfaces to maintain node connectivity. The latter happens per channel switching of the interface, and affects the network performance. Therefore, in this paper, we propose the Distance-Based Channel Assigmnent (DB-CA) scheme for multi-channel WMNs to solve such problems. In DB-CA, nodes just perform channel switching without channel scanning to communicate with neighboring nodes that operate on different channels. Furthermore, DB-CA minimizes the interference of channels being used by nodes near the gateway in WMNs. Our simulation results show that DB-CA achieves improved performance in WMNs.

• The Journal of Engineering Geology
• /
• v.30 no.4
• /
• pp.457-468
• /
• 2020

Problems arising during pile design works for plant construction, civil and architecture work are mostly come from uncertainty of geotechnical characteristics. In particular, obtaining the N-value measured through the Standard Penetration Test (SPT) is the most important data. However, it is difficult to obtain N-value by drilling investigation throughout the all target area. There are many constraints such as licensing, time, cost, equipment access and residential complaints etc. it is impossible to obtain geotechnical characteristics through drilling investigation within a short bidding period in overseas. The geotechnical characteristics at non-drilling investigation points are usually determined by the engineer's empirical judgment, which can leads to errors in pile design and quantity calculation causing construction delay and cost increase. It would be possible to overcome this problem if N-value could be predicted at the non-drilling investigation points using limited minimum drilling investigation data. This study was conducted to predicted the N-value using an Artificial Neural Network (ANN) which one of the Artificial intelligence (AI) method. An Artificial Neural Network treats a limited amount of geotechnical characteristics as a biological logic process, providing more reliable results for input variables. The purpose of this study is to predict N-value at the non-drilling investigation points through patterns which is studied by multi-layer perceptron and error back-propagation algorithms using the minimum geotechnical data. It has been reviewed the reliability of the values that predicted by AI method compared to the measured values, and we were able to confirm the high reliability as a result. To solving geotechnical uncertainty, we will perform sensitivity analysis of input variables to increase learning effect in next steps and it may need some technical update of program. We hope that our study will be helpful to design works in the future.

• The KIPS Transactions:PartD
• /
• v.18D no.4
• /
• pp.245-260
• /
• 2011

Mobile Devices, which are developed with the fast growing of the Internet, have flexible internet accessibility and can access the network anywere so that they can execute software applications. However, it is very challenging to deploy highly complex applications on mobile devices since they have limited resources. To overcome the limitation, researches on applying a concept of services to mobile applications have been proposed. Android is one of the popular mobile platforms and is designed to effectively execute mobile applications on the mobile devices having limited resources. Since service-based Android applications, which adopt a concept of services and Android platform, invoke remote services and are built with Android-specific components, they are much different from traditional software applications. Consequently, it is not straightforward to apply object-oriented (OO) analysis and design methods to developing service-based Android applications, although they have been frequently applied to developing traditional applications. In this paper, we present a process to develop service-based Android mobile applications, which extends a traditional OO development process. First, we raise design issues to be considered in developing service-based Android applications. Then, to solve the issues, we present detailed guidelines for essential phases of OO-based development process that are customized to service-based Android applications. Finally, to show applicability of the process, we perform a case study. The proposed design process is effectively utilized as a set of guidelines to develop service-based Android applications more systematically and effectively.

• The KIPS Transactions:PartB
• /
• v.9B no.3
• /
• pp.287-292
• /
• 2002

In general cases, the conventional internet connected to a terrestrial network is transmit too large medical images. To overcome this low speed transmitting rate problem of the interned, we have studied about an image division communication system as a fast telemedicine system. The image division communication system was 5-10 times faster than the conventional terrestrial internet link. Also we have developed a Web-based telemedicine system that can access every permitted server of hospitals via the internet. Studied image division communication corrected problem of other reflex quality decline in erratic transmission of reflex by transmission speed imbalance that is problem of single communication techniques that used in existing reflex transmission. Also, could keep quality state of fixed reflex gouge abnormal transmission speed. Visual Basic and C++, ASP programming techniques were used to make our system and it can access and retrieve medical information and image through only public web browse such as internet explorer without additional specific tools. To increase the transmitting speed of our telemedicine system, JPEG method was used. In conclusion, we were able to develop a fast and public telemedicine system using the proposed image division communication system and Web technology. Image division communication system technology increased the speed of the conventional internet and Web technology extended the scope of use for telemedicine system from intrahospital to public use.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.11
• /
• pp.746-754
• /
• 2016

Smart healthcare systems, a convergent industry based on information and communications technologies (ICT), has emerged from personal health management to remote medical treatment as a distinguished industry. The smart healthcare environment provides technology to deliver vital information, such as pulse rate, body temperature, health status, and so on, from wearable devices to the hospital network where the physician is located. However, since it deals with the patient's personal medical information, there is a security issue for personal information management, and the system may be vulnerable to cyber-attacks in wireless networks. Therefore, this study focuses on a key-development and device-management system to generate keys in the smart environment to safely manage devices. The protocol is designed to provide safe communications with the generated key and to manage the devices, as well as the generated key. The security level is analyzed against attack methods that may occur in a healthcare environment, and it was compared with existing key methods and coding capabilities. In the performance evaluation, we analyze the security against attacks occurring in a smart healthcare environment, and the security and efficiency of the existing key encryption method, and we confirmed an improvement of about 15%, compared to the existing cipher systems.

• Journal of KIISE:Databases
• /
• v.31 no.2
• /
• pp.108-121
• /
• 2004

In this paper, we propose an enhanced snapshot technique that solves performance degradation when snapshot is initiated for the storage cluster system. However, traditional snapshot technique has some limits adapted to large amount storage shared by multi-hosts in the following aspects. As volume size grows, (1) it deteriorates crucially the performance of write operations due to additional disk access to verify COW is performed. (2) Also it increases excessively the blocking time of write operation performed during the snapshot creation time. (3)Finally, it deteriorates the performance of write operations due to additional disk I/O for mapping block caused by the verification of COW. In this paper, we propose an efficient snapshot technique for large amount storage shared by multi-hosts in SAN Environments. We eliminate the blocking time of write operation caused by freezing while a snapshot creation is performing. Also to improve the performance of write operation when snapshot is taken, we introduce First Allocation Bit(FAB) and Snapshot Status Bit(SSB). It improves performance of write operation by reducing an additional disk access to volume disk for getting snapshot mapping block. We design and implement an efficient snapshot technique, while the snapshot deletion time, improve performance by deallocation of COW data block using SSB of original mapping entry without snapshot mapping entry obtained mapping block read from the shared disk.