• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.11a
• /
• pp.212-216
• /
• 2000

ZnO varistors for distribution surge arrester (18kV, 5kA) were developed and tested microstructure and electrical characteristics. Microstructure of ZnO varistor was consisted of ZnO grain, spinel phase and Bi-rich phase. Average grain size of ZnO varistor was $\mu\textrm{m}$ Reference voltage and lightning impulse residual voltage of ZnO varistor exhibited a good haracteristics above 5.5kV and below 11.56kV, respectively. Consequently, discharge capacity which is the most important characteristics of ZnO varistor for surge arrester exhibited excellent properties above 70kA at twice high-current impulse test. Moreover, variation rate of reference voltage and lightning impulse residual voltage showed below 5% and 2% after high-current impulse test, respectively. Leakage current and watt loss of ZnO varistor will not increase during accelerated aging test at stress condition, such as 3.213kV/$115^{\circ}C$/1000h.

• Toxicological Research
• /
• v.11 no.2
• /
• pp.261-266
• /
• 1995

Age-related change in the frequency of spontaneous sister chromatid exchange (SCE) and chromosornal aberrations were investigated in bone marrow cells of accelerated senescence-resistant mice (SAM R1) and senescence accelerated ones (SAM P1). And the effect of chronic treatment of ginseng extract (Panax ginseng C.A. Meyer) on these chromosomal abnormalities was tested in SAM P1. SCE frequency in the cells was progressively increased with age in both mice, but it was consistently higher in SAM P1 than in SAM R1 at all corresponding age. Chromosomal aberrations were, however, not significantly changed with age except that it was slightly increased in only aged SAM P1. Interestingly, the rate of these genetic instabilities in SAM P1 was remarkably retarded by long-term administration of ginseng water extract (0.05% in drinking water). These results suggest that frequency of spontaneous SCE in bone marrow cells increase in parallel with senescence of the mice, and SAM P1 is in the condition of being more exposed than SAM R1 to DNA damaging factors. These also indicate that long-term treatment of ginseng may reduce the genetic damage.

• Transactions of the Korean Society of Pressure Vessels and Piping
• /
• v.13 no.1
• /
• pp.92-100
• /
• 2017

Due to the presence of ferrite phase in the finished welds, austenitic stainless steel welds (ASSWs) are considered susceptible to the thermal aging embrittlement during long-term service in light water reactor environment. In this study, the thermal aging embrittlement of typical ASSWs, E308 and ER316L welds, were evaluated after the long-term exposure up to 20,000 h at $400^{\circ}C$, which is considered as an accelerated thermal aging condition. After thermal aging, the decrease of tensile ductility and fracture toughness was observed. The microstructure observation with high resolution transmission electron microscopy revealed that spinodal decomposition in ferrite phase of both E308 and ER316L welds would be the main cause of the degradation of mechanical properties. Also, it was shown that the difference of thermal ageing embrittlement between ER316L and E308 welds was significant, such that the reduction of fracture resistance for ER316L weld was much larger than that of E308 weld.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.2061_2062
• /
• 2009

Within serviced period of time in transformer, thermal stress is the most influential parameter affecting the aging behavior of an insulation system. The thermal stress on the insulation system may occur from operation in a high temperature environment due to Joule's heat at winding coils. This paper describes a development of capacitive sensor and preventive diagnosis techniques for electrical insulating oil, widely used for power and distribution transformer. To survey the dielectric properties of the virgin and used mineral insulating oil, we utilized the highly precise measuring system of KRISS. And the results were used to determine the design factors of the sensor. To evaluate diagnosis by the sensor, we performed accelerated aging test about insulating oils. The condition of aged specimens were investigated by measurements of relative permittivity i.e. capacitance change by capacitive sensor.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.47 no.2
• /
• pp.73-84
• /
• 2005

The main objective was to evaluate the tensile and bond properties of FRP rebar and durability performance after exposure of accelerated aging condition. Five types of FRP rebar include CFRP ISO, GFRP Asian, AFRP Technora, CFRP(D) and GFRP(D) rebars used in tensile and bond tests. Tensile test results of CFRP(D) and GFRP(D) were shown to possess acceptable tensile and durability performance compared with CFRP ISO, GFRP Asian, and AFRP Technora, Also, bond test results indicated that CFRP(D) and GFRP(D) rebars showed an ability to improve the bond strength.

• Journal of the Korea Safety Management & Science
• /
• v.12 no.4
• /
• pp.61-66
• /
• 2010

Organic light emitting diode(OLED) has been developed fast from 1963 when electric light emitting phenomenon was discovered. PMOLED(passive matrix OLED) is producted earlier than AMOLED(active matrix OLED). PMOLED is mainly mounted at sub display, but AMOLED is mounted at main display. Nowadays AMOLED is expanded to PMP(portable multimedia players), navigation and TV market. Even thought OLED's market is opening to many applications, OLED's life is worried until now. If we know about OLED's real life, we need time to test so much time over 20,000hrs. Realistically, there is difficult to test such as long time with products from the information-technology sector having a short life cycle. In this paper, we study about OLED's accelerated test to reduce life test by current. We can design OLED's accelerated life model by the result of test. The model consists of design variables like ratio of light emitting, organic material structure, condition of aging, etc. In conclusion, this model can be applied to study about organic material, machine and manufacturing process etc, and also it's possible to develop a method of manufacturing process & materials, so we need to study on the subject of this paper continuously.

• Korean Journal of Food Science and Technology
• /
• v.30 no.4
• /
• pp.751-758
• /
• 1998

Lipoxygenase-deficient soybeans, Jinpumkong (lipoxygenase-2, 3 lacking) and Jinpumkong 2 (lipoxygenase-1, 2, 3 lacking), were breeded for the improvement of beany flavor problem. The objectives of this study were to characterize and to examine the storage stability of two lipoxygenase-deficient soybeans by comparing with Hwangkeumkong having high lipoxygenase activity. The crude protein and crude lipid content of Jinpumkong 2 were lower than those of Hwkangkeumkong and Jimpumkong. All soybean samples were middle-sized and yellow-coated seeds. The rate of water uptake and trypsin inhibitor activity of Jinpumkong were greater than those of others. The cooking rate of Hwangkeumkong was the highest among all. The lipoxygenase activity of Hwangkeumkong was decreased when the soybeans were stored at $40^{\circ}C$ for 96hrs at 90% RH which is the condition of accelerated aging. After accelerated aging, the germination ratio of Hwangkeumkong was not changed but the ratio and speed of germination dropped rapidly in Jinpumkong and Jinpumkong 2.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.38 no.3 s.116
• /
• pp.61-65
• /
• 2006

The objective of this study was to find in what color Korean handmade paper(Hanji) is dyed when it is dyed with a pigment extracted from mugworts using different kinds of mordant, and how the paper is discolored and variety of strength under the condition of accelerated aging test. The results of this experiment are as follows. Among mugwort mordants, only ferrous sulfate mordant produced unique khaki color with a slightly lower degree of discoloration, so it is considered to be applicable in dyeing Korean paper. Bright yellow and light green colors were obtained using mugwort but their chroma was too low for actual use. With regard to water used, colors obtained using underground water had high chroma, but when distilled water was used paper was colored in useless light green. Mordant was found to lower the strength of Korean handmade paper, and the lowering of strength was even more serious under the condition of forced deterioration.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2010.06a
• /
• pp.50-50
• /
• 2010

전력케이블의 수명예측은 전력설비의 적절한 전력설비의 신뢰성 확보에 목적이 있다. 그러나 장기간의 수명으로 설계되는 관계로 가속실험을 수행하여 중장기적인 절연성 추세를 평가하기 위해서 와이블 분포함수와 같은 통계적인 접근과 수영과 관련된 보상조건에 대한 고려가 필수적이다.

• Proceedings of the Korean Society for Quality Management Conference
• /
• 2010.04a
• /
• pp.262-268
• /
• 2010

Organic light emitting diode is developed fast from 1963 after discovering electric light emitting phenomenon. First PMOLED(passive matrix OLED) product is manufactured and AMOLED(active matrix OLED) using TFT(thin film ransistor) is now in the center. PMOLED is mainly mounted at sub display. but AMOLED is mounted at main display. Also AMOLED expand the market to PMP(portable multimedia players), navigation and TV. Even thought OLED's market is opening to many applications, OLED is worried about lifetime until now. That's appeared in market in a very short time and is not known well about result of OLED's lifetime and reliability test. And there is no standard ssessment method and not enough study to standardization the method. A study's purpose is reduce the time for life test by accelerated current and it can do production possible design by accelerated life model in design phase. It's must be add to process variables and design variables(like ratio of light emitting, organic material structure, condition of aging, etc) to make the best use of supplied accelerated lifetime model in this paper. In terms of lifetime it needs each criterion of applications because of image sticking. In conclusion, it's possible to discover new defect because there is not much time to be opened in market and develop a method of manufacturing process & materials, so we need to study on the subject of this paper continuously.