• International Journal of Aeronautical and Space Sciences
• /
• 제18권2호
• /
• pp.186-196
• /
• 2017

In order to resolve the trimming difficulty in rotor CFD calculations, a high-efficiency and improved "delta trim method" is established to compute the blade control settings that are necessary to identify the blade motion. In this method, a simplified model which combines the blade element theory and different inflow models is employed to calculate the control settings according to the target aerodynamic forces, then it is coupled into a CFD solver with unsteady Navier-Stokes equations by the delta methodology, which makes the control settings and aerodynamics calculated and updated in the meantime at every trim cycle. Different from the previous work, the current research combines the inflow model based on prescribed wake theory. Using the method established, the control settings and aerodynamic characteristics of Helishape 7A, AH-1G and Caradonna-Tung rotors are calculated. The influence of different inflow models on trimming calculations is analyzed and the computational efficiency of the current "delta trim method" is compared with that of the "CFD-based trim method". Furthermore, for the sake of improving the calculation efficiency, a novel acceleration factor method is introduced to accelerate the trimming process. From the numerical cases, it is demonstrated that the current "delta trim method" has higher computational efficiency than "CFD-based trim method" in both hover and forward flight, and up to 70% of the amount of calculation can be saved by current "delta trim method" which turns out to be satisfactory for engineering applications. In addition, the proposed acceleration factor shows a good ability to accelerate the trim procedure, and the prescribed wake inflow model is always of better stability than other simple inflow models whether the acceleration factor is utilized in trimming calculations.

• 한국도로학회논문집
• /
• 제6권4호
• /
• pp.35-43
• /
• 2004

미끄럼저항은 자동차의 타이 어 와 포장노면 사이에서 발생하는 미끄러짐을 방지하여 제동거리를 제어하고 주행 안전성을 확보하는데 중요한 역할을 한다. 우천시의 미끄럼저항 감소는 치명적인 교통사고를 유발할 수 있다. 노면위에 남은 토사 및 겨울철 제설재는 미끄럼저항을 감소시킬 수 있는 요소가 될 수 있다. 본 연구에서는 노면상의 잔류하는 이물질이 타이어와 포장노면사이에서 발생하는 미끄럼저항에 미치는 영향을 다양한 콘크리트 노면조직 형태 (횡방향타이닝, 종방향타이닝, 골재노출) 및 노면조직의 마모조건(신설노면, 마모된 노면)에 대하여 검토하였다. 노면상의 이물질로는 모래, 염화칼슘과 자동차에서 발생하는 폐 오일을 사용하였으며 각 경우별로 이물질의 양을 달리하여, 모래의 경우는 입도 및 양을 달리해가며 미끄럼저항에 미치는 영향을 검토하였다.

• Journal of Periodontal and Implant Science
• /
• 제34권2호
• /
• pp.425-448
• /
• 2004

A bioactive and degradable poly(epsilon -caprolactone)/silica nanohybrid(PSH) was synthesized for the application as a bone substitute. PSH was manufactured by using silica and polycaprolacton. PSH was manufactured in some composition after low crystaline apatite had been formed in simulated body fluid and, was used this study. The safety of the PSH was established by test of acute, and subacute toxicity, sensitization cytotoxicity and sterility. In order to assess activity of osteoblast, the test for attaching osteoblast, proliferation test for osteoblast, differentiating gene expression test are performed in vitro. And bone substitutes were grafted in rabbit's calvarium, during 8 weeks for testing efficacy of bone substitutes. Degree of osteogenesis and absorption of substitutes were evaluated in microscopic level. In result, it was not appeared that acute and subacute toxicity, sensitization in intradermal induction phase, topical induction phase and challenge phase. It was shown that the test can not inhibit cell proliferation. adversely, it had some ability to accelerate cell proliferation. The result of sterility test described bacterial growth was not detected in most test tube. The attaching and proliferation test of osteoblast had good results. In the result of differentiating gene expression test for osteoblast, cbfa1 and, alkaline phosphatase, osteocalcin and GAPDH were detected with mRNA analysis. In the PSH bone formation test, ostgeoblastic activity would be different as material constitution but it had good new bone formation ability except group #218. futhermore, some material had been absorbed within 8 weeks. Above studies, PSH had bio-compatibility with human body, new bone formation ability and accelerate osteoblastic activity. So it would be the efficient bone substitute material with bio-active and biodegradable.

• The Journal of Korean Physical Therapy
• /
• 제27권3호
• /
• pp.140-146
• /
• 2015

Purpose: To determine the effects of 630 nm light emitting diode (LED) on full-thickness wound healing. Methods: Twelve male Sprague-Dawley rats were randomly divided into LED (n=6) and control group (n=6). Two $19.63mm^2$ wounds were created on the mid dorsum. LED group received a 630 nm LED irradiation with $3.67mW/cm^2$ for 30 minutes ($6.60J/cm^2$) for 7 days, while control group received sham LED irradiation. Epithelial gap, collagen density, ${\alpha}$-SMA fibroblast and PCNA keratinocyte were measured on histochemical and immunohistochemical staining using image analysis system. An independent t-test was conducted to compare the difference between groups. Results: The wound closure rate, collagen density, ${\alpha}$-SMA fibroblast number, epithelial gap and PCNA keratinocyte number have shown no significant difference between LED and control group at day 3 after the treatment. At day 7 after the treatment, the wound closure rate in LED group was increased when compared with control group (p<0.05). The collagen density (p<0.05) and ${\alpha}$-SMA immunoreactive fibroblast number (p<0.001) were increased when compared with control group at day 7. The epithelial gap in LED group was significantly shorten than control group at day 7 (p<0.01). The PCNA positive cell number in LED group was higher than control group at day 7 (p<0.01). Conclusion: 630 nm LED with $3.67mW/cm^2$, $6.60J/cm^2$ accelerate collagen deposition by stimulating fibroblasts, and enhance wound contraction by differentiating myofibroblasts in the dermis, and accelerate keratinocyte proliferation by facilitating DNA synthesis in the epidermis. It may promote the healing process in proliferation stage of wound healing.

• 한국게임학회 논문지
• /
• 제12권2호
• /
• pp.53-62
• /
• 2012

볼륨 광선 투사법은 볼륨 데이터를 가시화하는 기법 중 고화질 영상을 만들어내는 기법이다. 하지만 일반적으로 볼륨 데이터는 매우 크기 때문에 렌더링 시간이 오래 걸리는 문제가 있다. 이를 보완하기 위하여 최근에는 GPU를 이용하여 볼륨 광선 투사법을 가속화하는 많은 기법들이 연구되고 있다. 본 논문에서는 볼륨 광선 투사법을 가속화하기 위한 GPU 기반의 옥트리 탐색을 통한 효과적인 빈 공간 도약 기법을 제안한다. 여기서는 최대-최소 옥트리를 생성하고 옥트리의 루트 노드부터 정점분할을 이용하여 빈 공간을 식별한다. 찾아낸 빈 공간을 삭제함으로써 볼륨 데이터에서 의미 있는 객체를 둘러싸는 바운딩 다면체를 최소화 시킨다. 최소화 된 바운딩 다면체에 대해서만 렌더링을 진행함으로써 기존의 볼륨 광선 투사법과 비교하여 빠른 시간에 동일한 결과물을 생성한다.

• Journal of Microbiology and Biotechnology
• /
• 제27권11호
• /
• pp.1952-1960
• /
• 2017

Recently, soybean isoflavone aglycones (i.e., daidzein and genistein) and ${\gamma}-aminobutyric$ acid (GABA) have begun to receive considerable consumer attention owing to their potential as nutraceuticals. To produce these ingredients, multiple microorganisms and their enzymes are commonly used for catalysis in the nutraceutical industry. In this work, we introduce a novel fermentation process that uses whole-cell biocatalysis to accelerate GABA and isoflavone aglycone production in doenjang (a traditional Korean soybean paste). Microbial enzymes transform soybean isoflavone glycosides (i.e., daidzin and genistin) and monosodium glutamate into soybean isoflavone aglycones and GABA. Lactobacillus brevis GABA 100 and Aspergillus oryzae KACC 40250 significantly reduced the production time with the aid of a protease. The resulting levels of GABA and daidzein were higher, and genistein production resembled the levels in traditional doenjang fermented for over a year. Concentrations of GABA, daidzein, and genistein were measured as 7,162, 60, and $59{\mu}g/g$, respectively on the seventh day of fermentation. Our results demonstrate that the administration of whole-cell L. brevis GABA 100 and A. oryzae KACC 40250 paired with a protease treatment is an effective method to accelerate GABA, daidzein, and genistein production in doenjang.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제7권8호
• /
• pp.1911-1932
• /
• 2013

Orthogonal frequency-division multiplexing (OFDM) has become a popular modulation scheme for wireless protocols because of its spectral efficiency and robustness against multipath interference. Although the components of various OFDM protocols are functionally similar, they remain distinct because of the characteristics of the environment. Recently, graphics processing units (GPUs) have been used to accelerate the signal processing of the physical layer (PHY) because of their great computational power, high development efficiency, and flexibility. In this paper, we describe the implementation of parameterized baseband modules using GPUs for two different OFDM protocols, namely, 802.11a and 802.16. First, we introduce various modules in the modulator/demodulator parts of the transmitter and receiver and analyze the computational complexity of each module. We then describe the integration of the GPU-based baseband modules of the two protocols using the parameterized method. GPU-based implementations are addressed to explain how to accelerate the baseband processing to archive real-time throughput. Finally, the performance results of each signal processing module are evaluated and analyzed. The experiments show that the GPU-based 802.11a and 802.16 PHY meet the real-time requirement and demonstrate good bit error ratio (BER) performance. The performance comparison indicates that our GPU-based implemented modules have better flexibility and throughput to the current ones.

• 한국CDE학회논문집
• /
• 제10권6호
• /
• pp.444-454
• /
• 2005

Recently, the requirements of multi-resolution models of a solid model, which represent an object at multiple levels of feature detail, are increasing for engineering tasks such as analysis, network-based collaborative design, and virtual prototyping and manufacturing. The research on this area has focused on several topics: topological frameworks for representing multi-resolution solid models, criteria for the level of detail (LOD), and generation of valid models after rearrangement of features. As a solution to the feature rearrangement problem, the new concept of the effective zone of a feature is introduced in the former part of the paper. In this paper, we propose a feature-based non-manifold modeling system to provide multi-resolution models of a feature-based solid or non-manifold model on the basis of the effective feature zones. To facilitate the implementation, we introduce the class of the multi-resolution feature whose attributes contain all necessary information to build a multi-resolution solid model and extract LOD models from it. In addition, two methods are introduced to accelerate the extraction of LOD models from the multi-resolution modeling database: the one is using an NMT model, known as a merged set, to represent multi-resolution models, and the other is storing differences between adjacent LOD models to accelerate the transition to the other LOD. We also suggest the volume of the feature, regardless of feature type, as a criterion for the LOD. This criterion can be used in a wide range of applications, since there is no distinction between additive and subtractive features unlike the previous method.

• 문화기술의 융합
• /
• 제7권1호
• /
• pp.256-263
• /
• 2021

본 논문은 정부 부동산 정책의 문제점과 개선방안을 연구하였다. 문재인 정부는 세금 중과로 투기 세력을 잡겠다고 하며 규제 일변도로 나아가고 있다. 공급보다는 재건축 규제나 은행 대출을 강화했고 양도소득세도 인상했다. 정부가 경제보다 정치 논리를 강조하며 대책을 시행하자 시장은 불안하고 경기는 침체에 빠지고 있다. 토지는 인구증가라든지 산업화, 도시화, 부의 증대로 인하여 문제의 악순환을 증가시켜왔다. 부동산 문제는 토지정책을 잘못 수립하면 토지가격 상승뿐만 아니라 무질서한 국토이용이 가속화되고 거래 질서의 문란이 파생된다. 또한 부동산은 한번 엎지른 물은 담기 어려울 정도로 토지문제를 회복하기 어렵다. 이것을 토지의 비가역성이라고 한다. 지가가 한번 폭등하면 다시 잡기 어렵고 무분별한 개발은 생태계의 파괴로 이어지어 되돌기가 여간 쉽지 않다. 이렇게 복잡다단한 부동산 문제을 정부 정책으로 단기간에 단시일에 벌주듯 시행해서는 안 되는 이유다. 이번 논문은 부동산정책의 문제점을 고찰하고 이에 대한 개선방안을 살펴보고자 한다.

• Journal of Periodontal and Implant Science
• /
• 제53권1호
• /
• pp.2-19
• /
• 2023

Purpose: Surgical techniques in orthodontics have received widespread attention in recent years. Meanwhile, biomaterials with high molecular content have been introduced, such as platelet concentrates (PCs), which may accelerate orthodontic tooth movement (OTM) and reduce periodontal damage. The present systematic review aimed to answer the following PICO question: "In patients in whom orthodontic surgical techniques are performed (P), what is the effectiveness of using PCs over the surgical site (I) when compared to not placing PCs (C) to achieve faster tooth movement (O)?" Methods: A search was performed in 6 databases. The criteria employed were those described in the Preferred Reporting Items for Systematic Reviews and Meta-Analyses declaration. The present review included studies with a control group that provided information about the influence of PCs on the rate of OTM. Results: The electronic search identified 10 studies that met the established criteria. Conclusions: The included studies were very diverse, making it difficult to draw convincing conclusions. However, a tendency was observed for OTM to be accelerated when PCs were used as an adjuvant for canine distalization after premolar extraction when distalization was started in the same session. Likewise, studies seem to indicate an association between PC injection and the amount of canine retraction. However, it is not possible to affirm that the use of PCs in corticotomy shortens the overall treatment time, as this question has not been studied adequately.