• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.5 no.5
• /
• pp.454-457
• /
• 2004

Partial response maximum likelihood (PRML) is a powerful and indispensable detection scheme for perpendicular magnetic recording channels. The proposed method is a low complexity detection scheme which is related to the PRML system. The simulation results show that PR(1,2,3,4,3,2,1)ML and PR(l,2,3,3,2,1)ML using modulation encoding with R=2/3 have the most improved performance at K=3,4. However, in the case of K=3, R=2/3 PR(1,1,1,1)ML effectively reduces the complexity compared to PR(1,2,3,3,2,1), but it has L5dB performance degradation at most. In the case of K=4, R=l PR(1,2,2,1)ML has very low complexity compared to R=2/3 PR(l,2,3,4,3,2,1)ML. but it has about 2dB performance degradation at most.

• Proceedings of the KAIS Fall Conference
• /
• 2011.05b
• /
• pp.824-827
• /
• 2011

본 논문에서는 자동차 시트 리클라이너 기어의 파인 블랭킹 성형 실험을 통하여 V-링 설치 위치에 따른 기어의 다이 롤 높이 변화를 검토하였다. 3 종류의 다이 편과 가이드 플레이트 편을 설계하여 파인 블랭킹 금형을 제작하였으며 650 ton 파인블랭킹 프레스에서 성형 실험을 수행하였다. 실험으로부터 제품을 취출하여 다이 롤 높이를 측정하여 분석한 결과 기어 모듈과 관계없이 V-링 설치 위치가 가이드 플레이트에서 멀어짐에 따라 다이 롤 높이가 증가함을 파악할 수 있었다. 이와 같은 결과는 향후 파인 블랭킹 금형의 V-링을 설계할 때 다이 롤 높이를 최소화하기 위하여 유용하게 활용될 수 있을 것이다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.12
• /
• pp.3761-3767
• /
• 2009

This study was investigated to determine the combustion characteristics, decomposition efficiency, and the flue gas concentrations after combustion in the high temperature reactor($1,250{\sim}1,400^{\circ}C$, 1 atm) for the liquid wastes(waste oil and waste solvent) generated from the industrial complex. The concentration of nitrogen oxide(NOx) is decreased and the synthetic gas is increased when the mass ratio of $O_2$/waste is about 1.53 because the reaction condition was changed to reduction state. And BTEXs(benzene, toluene, ethylbenzene, xylene) are decomposed more than 99.99%. If the highly concentrated liquid waste (waste oil and waste solvent) is treated under the operating conditions suggested by this study, our treatment method for the liquid waste was found to be proper because of the contaminants emission concentration is very low. In addition, the synthetic gas after combustion can be used as an alternative fuel.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.4
• /
• pp.551-556
• /
• 2018

With the rise of the fourth industrial revolution, the importance of establishing R&D strategies to develop ICT technologies such as Big Data, Artificial Intelligence, Robots, the Internet of Objects, and 3D Printing is increasing. In this study, we analyzed the effects of the fourth industrial revolution on society and the present state of the national defense technology planning system, and proposed improvement measures for the utilization of the fourth industrial revolution in the defense industry from the perspective of defense R&D. The current defense R&D strategy focuses on securing the core technologies of each weapon system required by the military through research and development. Under the current system, the role of fourth industrial revolution technology will be confined to some of the weapons systems required by the military. In order to overcome this limitation, we propose a technology roadmap for the future weapons systems.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.4
• /
• pp.1775-1780
• /
• 2011

In this paper, it is analyzed about the mechanical characteristics of pedicle screw system which is a artificial implant for surgery to treatment serious lumbar vertebra diseases. The disk of lumbar vertebra to be fixed by pedicle screw system shows regressive phenomena. But if flexible rod, to give a flexibility(under 6 degree) to fixable disk is applied, it can protect against the degeneration of disk. This research is carried out a mechanical characteristic of pedicle screw system used flexible rod through finite elements analysis, and then flexible rod system was verified about safe movement through compression, tension and torsion test which is the pedicle screw system official recognition test(ASTM F 1717).

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.9
• /
• pp.5726-5737
• /
• 2014

The increasing importance of software has highlighted the need for the proper application of software ILS. On the other hand, the development of ILS has been somewhat limited to the area of hardware development. Therefore, this study examined the potential difficulties in applying software ILS to practical uses, and analyzed the drawbacks by reporting several domestic or foreign regulation cases. In addition, the differences between hardware and software ILS were examined by considering their characteristics of maintenance. Eventually, by establishing the proper range, this study proposes a development plan that is suitable for domestic weapon systems. The proposed research is expected to be helpful for offering specific plans for designing software ILS.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.8
• /
• pp.2088-2102
• /
• 2009

This study is the result of meta evaluation for the self evaluation of defense R&D programs in Korea. The overall meta evaluation result gained 74.3 points out of 100, so it was evaluated as 'Good'. T- test and one-way ANOVA were used to identify the difference between groups. As a result of difference analysis between groups, some evaluation items showed difference within significance level. From this analysis, it is attempted to identify possible problems and to find out the ways of improvements related to the self evaluation system of defense R&D Programs. The ultimate objective of this study is to manage the programs effectively and improve the reliability and the objectiveness of the defense R&D performances.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.10
• /
• pp.149-158
• /
• 2019

The scheduling of planned maintenance problem of a system consisting of a number of components was studied. The purpose of maintenance scheduling is to minimize the cost of maintaining long-term operations. On the system side, the cost of a system shutdown can be minimized by grouping and inspecting a number of components. In addition, proper inspection cycles can be selected for each component to identify the failure sufficiently early to minimize the cost of the failure. To reduce the complexity of the calculations, the 'base interval approach' used in previous studies was applied and, in addition, the inspection cost savings from simultaneous inspections of multiple components were considered. To compare the effectiveness of inspection cost savings, this paper presents the results of simulation analysis performed by referring to the cases in the existing studies.

• Proceedings of the KAIS Fall Conference
• /
• 2011.12a
• /
• pp.37-39
• /
• 2011

광역경제권 선도산업은 지역 간 협력 및 연계를 통해 산업 경쟁력을 높이는 것을 정책 목표로 하고 있어 R&D 경제적 파급효과에 대한 권역별 분석이 요구된다. 본 연구에서는 충청광역경제권 선도산업 중 'New IT' 분야 '차세대무선통신 단말기 부품소재 글로벌 경재력 강화' 프로젝트에 대한 경제적 파급효과를 한국은행에서 발간한 지역산업연관표를 활용하여 분석하였다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.2
• /
• pp.565-577
• /
• 2020

This study empirically examined how a firm size affects the determinants of innovative activities using the data of the Korean Innovation Survey (KIS) 2016. With data from 2,003 firms in the manufacturing sector, we performed logistic regression analysis and zero-inflated negative binomial regression analysis. R&D expenditure and patent applications were used as proxies for innovative activity. The independent variables included the firm's characteristics variables such as the firm's age, tech-level industry, RDemp (R&D employee ratio), venture, export, and industrial characteristics variables such as networking, appropriability, and spillovers. The empirical findings are that there are some differences in firms' innovative activity determinants among the firms' size groups. Next, strategic appropriability has negative impacts on small firms' R&D expenditure and medium-firms' patents. Networking is an important determinant of innovative activity for all firms, except for large firms. Furthermore, in deciding R&D activities, small and medium-sized firms were significantly influenced by industrial characteristics as compared to that of large firms. Our findings suggest some R&D promotion policies. Policies fostering firms' technological interaction would allow firms to take advantage of technological spillovers and thus raise the probability of investing in R&D.