• Journal of the Korean Wood Science and Technology
• /
• 제37권2호
• /
• pp.121-127
• /
• 2009

Acacia wood (Acacia mangium Willd.) is the most popular fast growing tree species planted in timber estate in Indonesia and is considered to be very valuable raw materials for structural composite products. The objective of the research was to evaluate the properties of OSB prepared from A. Mangium wood with or without immersing the strands to hot water at $80^{\circ}C$ for 2 hours. MDI adhesive was used in 3 levels i.e., 3%, 5%, and 7%. The moisture content of strand was 7%. The results indicated that immersing strands in hot water for 2 hours at $80^{\circ}C$ prior to manufacture OSB improved significantly the mechanical peoperties (i.e., MOR and MOE) of OSB. The higher the adhesive content resulted in the better the dimensional stabilisation (i.e., water absorption and thickness swelling) and the mechanical properties (i.e., MOR, MOE and IB) of OSB. OSB prepared from hot-water immersed strands with 5% adhesive content has met all parameters requirement on the JIS A 5908 (2003) standard.

• Journal of Forest and Environmental Science
• /
• 제31권2호
• /
• pp.119-125
• /
• 2015

This study examined the effects of rice straw steaming time and mixing ratio between rice straw and wood particle on the properties of mixed particle board from Acacia mangium Willd wood and rice straw. Rice straw and Acacia mangium Willd wood were collected in Hanoi, Vietnam. The particle board was three-layer particle board with the structural ratio of 1:3:1. The thickness, density and board size of the particle board were 18 mm, $0.7g/cm^3$, and $800{\times}800{\times}18$ (mm, including trimming), respectively. A resin mixture between commercial Urea-formaldehyde (U-F) adhesive and methylene diphenyl isocyanate (MDI) adhesive was used with a dosage of 12% for the core layer and 14% for the surface layer. In this experimental design, the steaming time for rice straw was 15, 30, 45, 60, and 75 minutes at $100^{\circ}C$. The rice straw-wood mixing ratio was 10, 20, 30, 40, and 50%. The results showed that both mixing ratio and steaming time affect the properties of the particleboard, but the mixing ratio has a stronger impact. A higher mixing ratio and a longer steaming time resulted in a better quality of particleboard. The optimal steaming time for rice straw was 46.12 minutes with the straw-wood mixing ratio of 29.85% with the following characteristics of the particle board: the modulus of rupture (MOR) of 14.64 MPa, internal bond strength (IB) of 0.382 MPa, thickness swelling (TS) of 8.83%, and board density of $0.7-0.7g/cm^3$.

• Journal of Forest and Environmental Science
• /
• 제29권1호
• /
• pp.1-14
• /
• 2013

Acacia mangium is an evergreen fast-growing tropical tree, which can grow up to 30 m tall and 50 cm thick, under favorable conditions. It is a low-elevation species associated with rain forest margins and disturbed, well-drained acid soils. It is native to Papua, Western Irian Jaya and the Maluku islands in Indonesia, Papua New Guinea and north-eastern Queensland in Australia. Due to its rapid growth and tolerance of very poor soils, A. mangium was introduced into some Asian, African and western hemisphere countries where it is used as a plantation tree. A. mangium has good quality wood traits, such as a comparatively low proportion of parenchymatous cells and vessels, white and hard wood, and high calorific value. Therefore, it is useful for a variety of purposes, such as furniture, cabinets, turnery, floors, particleboard, plywood, veneer, fence posts, firewood, and charcoal. It is also being used in pulp and paper making because it has good pulp traits, with high yields of pulp, quality of kraft, and produces paper with good optical, physical and surface properties. Because there are significant provenance differences in growth rate, stem straightness, heartwood formation and frequency of multiple leaders, the productivity and quality also varies depending upon environmental conditions, so genetic improvement programmes have been undertaken in countries like Australia, India, Indonesia, Malaysia, the Philippines, Taiwan and Thailand. The programme includes provenance identifications and testing, plus tree selection and clonal multiplication, establishment of seed orchards and hybridization. The phenology, reproductive biology, fruit characteristics, silvicultural practices for cultivation, pest and diseases problems, production of improved planting stock, harvesting, wood properties and utilization have been discussed in this paper.

• Journal of the Korean Wood Science and Technology
• /
• 제47권3호
• /
• pp.324-335
• /
• 2019

Timber from plantation forests has inferior physical and mechanical properties compared to timber from natural forest because it is mostly from fast-growing tree species that are cut at a young age. Filling cell voids with methyl methacrylate (MMA) can improve the wood properties. The purpose of this study was to determine the physical and mechanical properties of MMA-impregnated wood from three fast-growing wood species, namely jabon (Anthocephalus cadamba (Roxb.) Miq.), mangium (Acacia mangium Willd) and pine (Pinus merkusii Jungh. & de Vriese). Wood samples were either immersed in MMA monomer or impregnated with it and then heated to induce the polymerization process. Jabon, which was the lowest density wood, had the highest polymer loading, followed by pine and mangium. The physical and mechanical properties of samples were affected by wood species and the presence of MMA, with higher-density wood having better properties than wood with a lower density. Physical and mechanical properties of MMA wood were enhanced compared to untreated wood. Furthermore, the impregnation process was better than immersion process resulting the physical and mechanical properties. Based on MOR values, the MMA woods were one strength class higher compared to untreated wood with regard to Strength Classification of Indonesian Wood.

• Journal of the Korean Wood Science and Technology
• /
• 제47권5호
• /
• pp.567-578
• /
• 2019

A common problem with fast-growing hardwoods is dimensional instability that limits use of their wood. In this study, we investigated the effects of pre-drying methods, temperatures, and heating duration on the specific gravity, water absorption, and dimensional stability of three tropical fast-growing hardwoods, jabon (Neolamarckia cadamba Roxb.), sengon (Falcataria moluccana Miq.), and mangium (Acacia mangium Willd.). Wood samples were pre-dried by two methods (fan and oven at $40^{\circ}C$), and heat treatments were performed at three temperatures (120, 150, and $180^{\circ}C$) for two different time periods (2 and 6 hours). The specific gravity, water absorption, dimensional stability, and structural changes of the samples were evaluated. The results revealed that heat treatments slightly reduced the specific gravity of all three wood species. In addition, the heat treatments reduced water absorption and significantly improved dimensional stability of the samples. Oven pre-drying followed by heat treatment at $180^{\circ}C$ for 6 hours resulted in good physical improvement of jabon and sengon wood. Fan pre-drying followed by heat treatment at $180^{\circ}C$ for 2 hours improved the physical properties of mangium wood. The heat treatment shows a promising technique for improving the physical characteristic of fast growing hardwoods.

• Journal of the Korean Wood Science and Technology
• /
• 제48권2호
• /
• pp.245-252
• /
• 2020

This study was performed to analyze the mechanical properties of tropical hybrid cross-laminated timber (CLT) with bamboo laminated board as the core layer in order to evaluate the possibility of its use as a CLT material. Bamboo board was used as the core layer and the tropical species Acacia mangium willd., from Indonesia, was used as the lamination in the outer layer. The modulus of elasticity (MOE), modulus of rupture (MOR), and shear strength of the hybrid CLT were measured according to APA PRG 320-2018 Standard for Performance-Rated Cross-Laminated Timber. The results show that the bending MOE of the hybrid CLT was found to be 2.76 times higher than SPF (Spruce Pine Fir) CLT. The reason why the high MOE value was shown in bamboo board and hybrid CLT applied bamboo board is because of high elasticity of bamboo fiber. However, the shear strength of the hybrid CLT was 0.8 times lower than shear strength of SPF CLT.