• 생명과학회지
• /
• 제32권2호
• /
• pp.142-147
• /
• 2022

Oxysterols은 콜레스테롤의 산화 유도체로서 죽상경화증(atherosclerosis)에서 병태생리학으로 큰 관련성을 가진다. 본 연구는 oxysterols 중 많은 양을 차지하는 7-ketocholesterol (7-KC)이 단핵구(monocyte)의 분화와 활성화에 미치는 영향을 인간 단핵구세포주 THP-1을 이용하여 조사하였다. 7-KC를 처리한 THP-1 세포는 세포독성 없이 약간의 세포증식이 감소하였고, 세포내 lipids의 양이 크게 증가함을 Nile red 염색에 의해 관찰하였다. 7-KC는 단독으로 세포의 부착능(adhesion)에 영향을 주지 않았지만, phorbol 12-myristate 13-acetate (PMA)로 자극한 THP-1 세포에서는 부착능의 뚜렷한 감소를 나타내었다. 그리고, 형광이 부착된 latex beads를 이용하여 7-KC의 phagocytosis (포식능)를 조사하였다. 7-KC는 PMA로 분화를 자극한 세포의 phagocytosis를 현저히 감소시켰다. 또한, 7-KC를 처리한 THP-1 세포는 대식세포(macrophage)의 막표면 인자인 ICAM-1, CD11a, scavenger receptor(SR, 청소수용체) SR-A1, SR-B2 (CD36)의 발현을 감소시켰다. 하지만, 7-KC는 단독으로 혹은 PMA로 자극한 세포에서도 SR-D1 (CD68)의 발현을 현저히 증가시켰다. 이를 종합하면, 7-KC는 단핵구를 sterols이 풍부한 거품세포(foam cell)로 변형시킴으로써 생리적 자극에 의한 정상적인 단핵구의 분화와 활성화를 저해한다는 것을 시사한다.

• ALGAE
• /
• 제38권2호
• /
• pp.141-150
• /
• 2023

Light quality is a common environmental factor which influences the metabolism of biochemical substances in algae and leads to the response of algal growth and development. Pyropia yezoensis is a kind of economic macroalgae that naturally grows in the intertidal zone where the light environment changes dramatically. In the present study, P. yezoensis thalli were treated under white light (control) and monochromatic lights with primary colors (blue, green, and red) for 14 days to explore their physiological response to light quality. During the first 3 days of treatment, P. yezoensis grew faster under blue light than other light qualities. In the next 11 days, it showed better adaptation to green light, with higher growth rate and photosynthetic capacity (reflected by a higher rETR_max = 61.58 and E_k = 237.78). A higher non-photochemical quenching was observed in the treatment of red light than others for 14 days. Furthermore, the response of P. yezoensis to light quality also results in the difference of photosynthetic pigment contents. The monochromatic light could reduce the synthesis of all pigments, but the reduction degree was different, which may relate to the spectral absorption characteristics of pigments. It was speculated that P. yezoensis adapted to a specific or changing light environments by regulating the synthesis of pigments to achieve the best use of light energy in photosynthesis and premium growth and metabolism.

• 한국작물학회:학술대회논문집
• /
• 한국작물학회 2022년도 추계학술대회
• /
• pp.296-296
• /
• 2022

This study was investigated to compare the milling and physicochemical characteristics of six Korean wheat cultivars (Keumkang, KK; Jokyung, JK; Goso, GS; Joongmo2008, JM; Baekkang, BK; Saekeumkang, SKK) and five foreign wheat classes (Australian standard white wheat, ASW; Australian hard, AH; US northern spring, NS; US hard red winter, HRW; Soft wheat, SW). Korea and foreign wheat grains were milled using a Buhler MLU-202. Flour moisture, ash, protein, gluten, sedimentation, particle size, solvent retention capacity (SRC) and dough properties of flour were analyzed. Results showed that the hard wheats had a greater total flour yield and reduction fraction yield than the soft wheats regardless of the country. However, there were in the milling characteristics between the US and Korean soft wheats. GS, a soft wheat in Korea, had the lowest flour yield (59.6%) and the highest bran fraction yield (21.4%). The particle sizes of flour by milling fraction were B1>B2>B3 for the largest, and the R1〈R2〈R3 for the smallest. Particle size, ash, protein contents and the values of lactic acid SRC showed highly correlated with flour yield. The gluten-performance-index (GPI) is the ratio of the lactic acid SRC value to the sum of sodium carbonate and sucrose SRC values, and it has been used as a quality indicator for overall performance potential of flour. GPI values differed depending on the wheat variety or class, JM (0.82) was the highest value, and SKK (0.56) and SW (0.59) were low. The curve pattern of the Mixolab result also gives a quality indication of the flour sample. JM and NS flour had similar pattern at water absorption and gluten strength parameters and BK and HRW had similar viscosity patterns. These results will enable further study for blending Korean wheat cultivar to improve the flour quality.

• 한국지반공학회논문집
• /
• 제40권1호
• /
• pp.47-54
• /
• 2024

기존의 사면안정해석은 포화토 이론에 기반하여 비탈면 안정성에 대한 평가가 진행되었다. 그러나 자연 지반은 기후에 따라 함수 특성이 변화하기 때문에 포화토 이론은 한계가 있어 불포화토의 특성을 고려한 안정해석 연구가 필요하다. 또한, 실제 불포화토 지반은 호우로 인해 모관흡수력이 감소하여 사면 안정성의 저감을 유발하기 때문에 이에 대한 공학적 특성을 평가하는 것이 중요한 실정이다. 본 연구에서는 국내 산지에 내포된 화강풍화토를 활용하여 세립분 함량을 0%, 10%, 20%, 30%로 구분한 4가지 시료를 통해 흙-함수 특성 시험을 수행하였으며, 특히 건조과정뿐만 아니라 실제 사면에서 호우로 인한 안정성 평가를 고려하기 위해 함수비를 증가시키는 습윤과정을 진행하였다. 또한, 다양한 이론식을 적용하여 실험에 가장 일치하는 이론식인 van Genuchten(1980) 모델을 활용하였으며, 건조과정과 습윤과정에 대한 화강풍화토의 세립분에 따른 파라미터를 분석하였다.

• 대한조선학회논문집
• /
• 제61권1호
• /
• pp.51-60
• /
• 2024

Hi Air Korea and Hanwha ocean are currently developing an Onboard Carbon dioxide Capture System (OCCS) to absorb CO₂ emitted from ship's engine using a sodium hydroxide(NaOH) solution, and converting the resulting salt into a solid form through a chemical reaction with calcium oxide (CaO). The system process involves the following steps; 1)The reaction of CO₂ gas absorption in water, 2)The reaction between carbonic acid (H₂CO₃) and NaOH solution to produce carbonate or bicarbonate, and 3)The reaction between carbonate or bicarbonate and CaO to form calcium carbonate (CaCO₃). And ultimately, the solid material, CaCO₃, is separated and discharged using a separator. The OCCS has been installed on an ship and the test results have confirmed significant reduction effects of CO₂ in the ship's exhaust gas. A portion of the exhaust gas emitted from the engine was transferred to the OCCS using a blower. The flow rate of the transferred gas ranged from 800 to 1384 m³/hr, and the CO₂ concentration in the exhaust gas was 5.1 vol% for VLSFO, 3.7 vol% for LNG and a 12 wt% NaOH solution was used. The results showed a CO₂ capture efficiency of approximately 42.5 to 64.1 vol% and the CO₂ capture rate approximately 48.4 to 52.2kg/hr. Additionally, to assess the impact of the discharged CaCO₃on the marine ecosystem, we conducted "marine ecotoxicity test" and performed Computational Fluid Dynamics (CFD) analysis to evaluate the dispersion and dilution of the discharged effluent.

• Structural Engineering and Mechanics
• /
• 제90권6호
• /
• pp.611-633
• /
• 2024

This study intends to investigate the response of multi-cell (MC) beams to flexural loads in which the primary reinforcement is composed of both metallic and non-metallic materials. "Multi-cell" describes beam sections with multiple longitudinal voids separated by thin webs. Seven reinforced concrete MC beams measuring 300×200×1800 mm were tested under flexural loadings until failure. Two series of beams are formed, depending on the type of main reinforcement that is being used. A control RC beam with no openings and six MC beams are found in these two series. Series one and two are reinforced with metallic and non-metallic main reinforcement, respectively, in order to maintain a constant reinforcement ratio. The first crack, ultimate load, deflection, ductility index, energy absorption, strain characteristics, crack pattern, and failure mode were among the structural parameters of the beams under investigation that were documented. The primary variables that vary are the kind of reinforcing materials that are utilized, as well as the kind and quantity of mesh layers. The outcomes of this study that looked at the experimental and numerical performance of ferrocement reinforced concrete MC beams are presented in this article. Nonlinear finite element analysis (NLFEA) was performed with ANSYS-16.0 software to demonstrate the behavior of composite MC beams with holes. A parametric study is also carried out to investigate the factors, such as opening size, that can most strongly affect the mechanical behavior of the suggested model. The experimental and numerical results obtained demonstrate that the FE simulations generated an acceptable degree of experimental value estimation. It's also important to demonstrate that, when compared to the control beam, the MC beam reinforced with geogrid mesh (MCGB) decreases its strength capacity by a maximum of 73.33%. In contrast, the minimum strength reduction value of 16.71% is observed in the MC beams reinforced with carbon reinforcing bars (MCCR). The findings of the experiments on MC beams with openings demonstrate that the presence of openings has a significant impact on the behavior of the beams, as there is a decrease in both the ultimate load and maximum deflection.

• 공업화학
• /
• 제35권4호
• /
• pp.296-302
• /
• 2024

염화 철(III)을 이용한 2-에티닐피리딘의 in-situ 4차염화 중합을 통하여 이온성 폴리아세틸렌-염화 철(III) 복합체를 용이하게 합성하였다. 합성한 폴리아세틸렌-염화 철(III) 복합체의 구조를 여러 가지 분석장비를 통해 확인한 결과 설계한 염화 철(III)-피리디늄 치환기를 갖는 공액구조 고분자가 생성되었음을 확인할 수 있었다. 본 중합의 메커니즘은 첫 번째 단계에서 형성된 에티닐피리디늄 염의 중합반응이 개시되고 전파되는 것으로 분석되었다. P2EP-FeCl₃ 복합체의 전기 광학 및 전기화학적 특성을 연구하였다. P2EP-FeCl₃ 복합체의 UV-visible 스펙트럼에서 흡수 최대값은 480 nm 및 533 nm이었고 PL 최대값은 598 nm로 나타났다. P2EP-FeCl₃ 복합체의 순환 전압전류 특성 측정결과 산화 피크와 환원 피크가 비가역적인 전기화학적 거동을 보였으며, 복합체의 산화 환원 과정의 동역학은 스캔 속도 대비 산화 전류 값의 도표부터 확산 제어 프로세스에 가까운 것으로 확인되었다.

• Korean Chemical Engineering Research
• /
• 제58권3호
• /
• pp.325-345
• /
• 2020

본 연구에서는 다매체 퓨가시티 모델을 기반으로 Volatile organic compounds (VOCs) 방지기술의 인체위해성·환경성·경제성 평가를 수행하여 석유화학 산업단지 내 VOCs 저감을 위한 최적가용기법(Best available technology, BAT)을 선정하였다. 다매체 퓨가시티 모델을 이용하여 U-city에 소재한 석유화학 산업단지에서 배출되는 VOCs 중 Benzene, Toluene, Ethylbenzene, Xylene (BTEX)의 다매체 거동 특성과 잔류농도 분포를 예측하였다. 매체 통합 인체위해성 평가 및 민감도 분석을 이용해 BTEX의 물질별 인체위해성을 예측하고 주요 영향 변수를 규명하였으며, 다매체 환경시스템 내 잔류농도 기준의 환경성 평가와 비용-편익 경제성 평가를 수행하여 우수환경관리기법군(BAT군)을 선정하였다. BTEX의 다매체 거동 분석 결과, 토양 매체에서 높은 잔류 분포 특성(60%, 61%, 64%, 63%)을 보였으며, Xylene은 모든 다매체 환경에서 가장 높은 잔류성을 보였다. BAT후보군 중에서 흡수법은 가장 높은 인체위해성을 보여 BAT 선정에서 제외하였으며, 민감도 분석 결과 대기 매체에서의 물질 반감기와 경로별 노출계수가 인체위해성과 높은 상관성이 있는 것으로 판단되었다. 환경성 평가와 비용-편익 경제성 평가를 고려하여, 재생 열산화법, 재생 촉매산화법, 바이오 필터법, UV 산화법, 활성탄 흡착법을 석유화학 산업단지 내 VOCs 저감을 위한 BAT군으로 선정하였으며, 본 연구에서 제시한 매체통합적 접근 방식의 BAT 선정 방법론은 사업장에서 오염물질 저감을 위한 최적의 배출시설 선정과 통합환경관리제도 운영에 기여할 수 있을 것으로 기대된다.

• 생물환경조절학회지
• /
• 제26권4호
• /
• pp.317-323
• /
• 2017

쓰레기 소각장이나 산업체의 폐열을 농업에 활용한 사례는 몇몇 있었다. 그러나 온배수를 농업에 활용한 사례는 전무하였으며, 치어, 종패 등을 양식하는 수산업이 대부분이었다. 본 연구에서는 화력발전소의 온배수(폐열)를 열원으로 이용하는 120 RT 규모의 냉난방시스템을 제주특별자치도 서귀포시 안덕면 소재의 $5,280m^2$ 아열대 작물(망고) 재배온실에 설치, 10월에서 다음해 2월까지 약 5개월 동안 난방을 실시하여 난방에너지 비용 절감 효과 등 분석하였다. 난방에너지 비용 절감효과는 면세경유에 대하여 87%이였으며, 또한 발전소의 온배수를 에너지원으로 재활용함으로서 62%의 이산화탄소 배출 저감 효과를 얻었다. 본 연구를 계기로 2015년에 해수가 수열에너지 분야로 재생에너지에 포함되었다. 해수의 표층의 열을 히트펌프를 사용하여 변환시켜 얻은 에너지라는 수열에너지 분야의 기준과 범위를 볼 때, 이는 온배수가 재생에너지에 포함되었다고 말해도 과언이 아닐 것으로 사료된다. 그 이유는 온배수도 해수임에도 불구하고 온도가 일반 해수보다 $7{\sim}8^{\circ}C$ 높아, 일반 해수를 히트펌프의 열원으로 이용하는 것보다 온배수를 열원으로 이용했을 때 히트펌프의 성능이 높기 때문이다. 또한 같은 해 농식품부의 폐열 재이용 시설 지원 사업이 발표되어, 발전소 온배수뿐만 아니라 산업체와 소각장의 폐열을 농업에 활용하면 지원을 받을 수 있게 되었다. 이 사업에 의하여 2015년 당진시, 하동군, 제주시, 곡성군이 선정되었으며, 2016년 태안군, 서귀포시 등이 선정되어, 2016년 말 곡성군과 제주시가 공사를 완료, 농업에 폐열을 활용하고 있으며(제주시는 발전소, 곡성군은 산업체 폐열을 이용하고 있음), 기타 지역은 추진 중이다.

• 대한소아치과학회지
• /
• 제23권3호
• /
• pp.640-658
• /
• 1996

The purpose of this study was to examine the mechanism of improving acid resistance of Nd-YAG laser irradiated tooth enamel and determine the most effective energy density for improving acid resistance. The bovine tooth enamel were lased with a pulsed Nd-YAG laser. The energy densities of exposed laser beam were varied from 10 to $70\;J/cm^2$. To investigate the degree of improving acid resistance by irradiation, all the samples were submerged to demineralize in 0.5 N $HClO_4$ solution for 1 minute. After 1 minute, 0.05 % $LaCl_3$ was added to the solution for interrupting the demineralization reaction. The amounts of dissolved calcium and phosphate in the solution were measured by using an atomic absorption spectrophotometer and the UV/VIS spectrophotometer, respectively. To examine the mechanism of improving acid resistance, X-ray diffraction analysis, infrared spectroscopy, and scanning electron microscopy were taken. The X-ray diffraction pattern of the samples were obtained in the $10^{\circ}{\sim}80^{\circ}2{\theta}$ range with $Cu-K{\alpha}$ radiation using M18HF(Mac Science Co.) with X-ray diffractometer operating at 40 KV and 300 mA. The infra-red spectra of the ground samples in 300 mg KBr pellets 10 mm diameter were obtained in the $4000cm^{-1}\;to\;400cm^{-1}$ range using JASCO 300E spectrophotometer. The scanning electron microscopy was carried out using JSM6400(JEOL Co.) with $500{\sim}2000$ times magnification. The results were as follow 1. The concentration of calcium dissolved from laser irradiated enamel with $50J/cm^2$ was significantly lesser than that of unlased control group (p<0.05) 2. From the result of the X-ray diffraction analysis, $\beta$-TCP, which increases acid solubility, was identified in lased enamel but the diffraction peaks of (002) and (004) became sharp with increasing energy density of laser irradiation. This means that the crystals in lased samples were grown through the c-axis and subsequently, the acid solubility of enamel decreased. 3. The a-axis parameter was slightly increased by laser irradiation, whereas the c-axis parameter was almost constant except for a little decrease at $50J/cm^2$. 4. In the infra-red spectra of lased enamels, phosphate bands ($600{\sim}500cm^{-1}$), B-carbonate bands (870, $1415{\sim}1455cm^{-1}$), and A-carbonate band ($1545cm^{-1}$) were observed. The amounts of phosphate bands and the B-carbonate bands were reduced, on the other hand, the amount of the A-carbonate band was increased by increase the energy density. 5. The SEM experiments reveal that the surface melting and recrystallization were appeared at $30J/cm^2$ and the cracks were observed at $70J/cm^2$. From above results, It may be suggested that the most effective energy density for improving acid resistance of tooth enamel with the irradiation of Nd-YAG laser was $50J/cm^2$. The mechanism of improving acid resistance were reduction of permeability due to surface melting and recrystallization of lased enamel and reduction of acid solubility of enamel due to decrease of carbonate content and growth of crystal.