• 한국음향학회지
• /
• 제36권4호
• /
• pp.254-260
• /
• 2017

본 연구는 만석 객석의자 등의 흡음특성 시 활용될 수 있는 표준더미 개발을 위한 기초연구로서 착의량에 따른 인체의 흡음특성을 잔향실법 측정방법을 이용하여 평가하였다. 측정방법은 기존 연구(Conti et al., 2004)에 따라 잔향실 중앙에 1인의 피험자가 서 있는 조건에서, 다양한 소재의 의복착용에 따른 주파수 대역별 흡음면적을 측정하였다. 측정 결과, 겉옷을 제외한 상하의를 착용하였을 때 전주파수대역 평균 흡음면적은 피험자에 따라 $0.25m^2-0.48m^2$의 분포를 보였고, 외투 착용에 따라 $0.38m^2-0.98m^2$의 분포를 보였다. 섬유소재에 따라 폴리에스터 류의 겉옷은 800 Hz - 1 kHz 대역에서 피크 특성을 보였고, 모나 면 소재의 겉옷은 고주파수 대역으로 갈수록 흡음면적이 높아지는 특성을 보였다. 착의량에 따른 흡음면적의 변화는 착용한 의복의 열저항(clo)과 체표면적당 무게로 구분하여 비교하였다.

• 오토저널
• /
• 제13권5호
• /
• pp.65-72
• /
• 1991

This paper presents the results of static crushing test that was conducted to characterize the energy absorption and collapse characteristics of composite box tubes. Fifteen specimens were fabricated with woven fabric prepreg using [0/90] glass/epoxy and were autoclave cured. Quasistatic compression test was performed on them. Collapse mode and energy absorption capacity vary significantly as a function of the thickness and length of a square side of composite box tube.

• 약학회지
• /
• 제37권1호
• /
• pp.66-75
• /
• 1993

Dental abrasive, dicalcium phosphate dehydrate (DCPD) was prepared and the several important factors affecting on the quality of toothpaste were investigated by means of set test, glycerine absorption, Coulter counter test, color difference, BET adsorption, mercury porosimetery, and rheogram comparing with two foreign DCPDs, MFO4 and Dentphos K. Sample DCPD was prepared by reaction between 85% H$_{3}$PO$_{4}$ and 15% milk of lime at $39^{\circ}C$ (pH6.5), and stabilized with TSPP and TMP. The physicochemical properties of Sample DCPD were obtained as follows: whiteness (98.99), average particle size (15.5 $\mu\textrm{m}$), pH (7.9), remainder particle weight (0.49w/w%), glycerine absorption value (64 ml), and set test (passed). N$_{2}$ adsorption curves (BET) of three kinds of DCPD showed non-porous type III isotherm. BET adsorption parameters of sample DCPD showed that surface area was 24.9 m$^{2}$/g, total pore volume 0.09 cm$^{3}$/g and average pore radius 72.0 $\AA$. The rheogram of the toothpaste containing each DCPD showed bulged plastic flow with yield vlaue and thixotropic behavior. These results meet standard requirements as abrasive standard, and suggested that synthesized sample DCPD could be used a dental abrasive such as a high quality grade in practice as foreign DCPDs.

• 한국시뮬레이션학회논문지
• /
• 제24권4호
• /
• pp.89-96
• /
• 2015

매개효과 검정기법으로 널리 사용하고 있는 Baron and Kenny 접근법, Sobel, Aroian, Goodman 검정법들의 통계적 검정력이 약할 뿐만 아니라, 정확하지 않다는 비판이 대두되면서, bootstrapping 기법이 대안으로 제시되고 있다. 이에 본 연구는 bootstrapping 기법을 토대로 세 개 이상의 변수로 구성된 다중매개모델에서의 매개효과 검정을 위해 가상의 phantom 변수를 도입하여 검정하였다. 특히, 경영전략분야의 자원기준관점 연구에서 진행되고 있는 조직자원과 매개변수 흡수능력, 그리고 기술사업화역량 관계 모델을 다중매개모델로 설정하여, bootstrapping 접근방법과 phantom 변수 설정을 통해 총간접효과 크기와 유의확률을 계산하고, 흡수능력의 매개효과를 검정하였다. 검정결과 매우 효율적이고, 체계적인 매개효과 검정이 가능하였음을 확인할 수 있었으며, 인적자원과 물적자원의 자원 특성에 따라 흡수능력의 매개 특성도 차이가 있음을 확인하였다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 추계학술대회논문초록집
• /
• pp.370.1-370
• /
• 2002

A method using beamforming has been developed to measure absorption coefncient of oblique incidence. MUSIC(Multiple Signal Classification) method detects the angle of incidence and reflection. And beamforming method separates the incident and reflected wave. And spatial smoothing technique is used to reduce the coherence between the incident and reflected wave. The test material were modeled as a locally reacting surface. Numerical and experiment results are performed to verify the performance of proposed method.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2002년도 춘계학술대회 논문집
• /
• pp.17-20
• /
• 2002

Recently tube hydroforming technology has been one of the most important technology in automotive industry in the point of saving weight and high quality for collision accidents. In this paper, experimental studies for axial compression tests of hydroformed tubes are performed to investigate the collapse absorption characteristics. The collapse absorption abilities are discussed and compared for as-received, hydroformed, and press formed tubes.

• 대한조선학회지
• /
• 제19권4호
• /
• pp.1-10
• /
• 1982

An experimental investigation on the energy absorption of two staged combined structures is presented, which deals with the plastic collapse test as a series of research on soft bow structure involved in a ship collision. The principle of arithmetic superposition of energy absorption is derived upon experimental analysis and based upon the characteristics of the energy absorptions of component structures. This relationship is related to the further approach toward the design of soft bow.

• Bulletin of the Korean Chemical Society
• /
• 제32권11호
• /
• pp.3865-3872
• /
• 2011

A quantitative structure-property relationship (QSPR) study was performed for the prediction of the absorption maxima of azobenzene dyes. The entire set of 191 azobenzenes was divided into a training set of 150 azobenzenes and a test set of 41 azobenzenes according to Kennard and Stones algorithm. A seven-descriptor model, with squared correlation coefficient ($R^2$) of 0.8755 and standard error of estimation (s) of 14.476, was developed by applying stepwise multiple linear regression (MLR) analysis on the training set. The reliability of the proposed model was further illustrated using various evaluation techniques: leave-many-out crossvalidation procedure, randomization tests, and validation through the test set.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2003년도 춘계학술발표대회 논문집
• /
• pp.135-138
• /
• 2003

Recently, sandwich structures have been widely employed in load bearing structures due to their high specific stiffness and high specific strength. Some sandwich structures are subjected to not only static loads but also impact loads which might induce failure of structures at far less load than expected. Since sandwich structures can fail in various modes, estimation of the impact energy absorption is difficult. In this work, the impact failure modes and the impact energy absorption characteristics of the sandwich beams were predicted by the FE analysis and confirmed by the impact test. From the analytic and experimental results, the impact failure mode map was constructed with respect to non-dimensional parameters.

• 한국도로학회논문집
• /
• 제15권2호
• /
• pp.57-63
• /
• 2013

PURPOSES : This study was performed to investigate a feasibility of job-site use of recycled concrete aggregate exceeding 3% of absorption rate. Test variables are coarse aggregate types such as natural aggregate, job-site processed recycled aggregate, and recycled aggregate processed from the intermediate waste treatment company. METHODS : First, aggregate properties such as gradation, specific gravity and absorption rate were determined. Next a basic series of mechanical properties of concrete was tested. RESULTS : All strength test results such as compression, flexure and modulus were satisfied for the minimum requirements. Finally up to first 48 elapsed days the shrinkage strains of concretes made from both recycled aggregates (in case of volume-surface ratio of 300) appeared to be greater than 26% of the companion concretes made from natural aggregates. CONCLUSIONS : Drying shrinkage result is ascribed to greater absorption rate and specific gravity of those specimens made from recycled aggregate. This may be reduced with an addition of admixtures.