• 제목/요약/키워드: Absorption quantity

검색결과 157건 처리시간 0.066초

Experimental and numerical study on the structural behavior of Multi-Cell Beams reinforced with metallic and non-metallic materials

  • Yousry B.I. Shaheen;Ghada M. Hekal;Ahmed K. Fadel;Ashraf M. Mahmoud
    • Structural Engineering and Mechanics
    • /
    • 제90권6호
    • /
    • pp.611-633
    • /
    • 2024
  • This study intends to investigate the response of multi-cell (MC) beams to flexural loads in which the primary reinforcement is composed of both metallic and non-metallic materials. "Multi-cell" describes beam sections with multiple longitudinal voids separated by thin webs. Seven reinforced concrete MC beams measuring 300×200×1800 mm were tested under flexural loadings until failure. Two series of beams are formed, depending on the type of main reinforcement that is being used. A control RC beam with no openings and six MC beams are found in these two series. Series one and two are reinforced with metallic and non-metallic main reinforcement, respectively, in order to maintain a constant reinforcement ratio. The first crack, ultimate load, deflection, ductility index, energy absorption, strain characteristics, crack pattern, and failure mode were among the structural parameters of the beams under investigation that were documented. The primary variables that vary are the kind of reinforcing materials that are utilized, as well as the kind and quantity of mesh layers. The outcomes of this study that looked at the experimental and numerical performance of ferrocement reinforced concrete MC beams are presented in this article. Nonlinear finite element analysis (NLFEA) was performed with ANSYS-16.0 software to demonstrate the behavior of composite MC beams with holes. A parametric study is also carried out to investigate the factors, such as opening size, that can most strongly affect the mechanical behavior of the suggested model. The experimental and numerical results obtained demonstrate that the FE simulations generated an acceptable degree of experimental value estimation. It's also important to demonstrate that, when compared to the control beam, the MC beam reinforced with geogrid mesh (MCGB) decreases its strength capacity by a maximum of 73.33%. In contrast, the minimum strength reduction value of 16.71% is observed in the MC beams reinforced with carbon reinforcing bars (MCCR). The findings of the experiments on MC beams with openings demonstrate that the presence of openings has a significant impact on the behavior of the beams, as there is a decrease in both the ultimate load and maximum deflection.

국내 골재의 물리적 특성 분석 (Physical Characterization of Domestic Aggregate)

  • 고준영;박은규;최정해;김종태
    • 지질공학
    • /
    • 제33권1호
    • /
    • pp.169-187
    • /
    • 2023
  • 골재자원조사를 통해 수집된 84개 시‧군의 품질시험을 바탕으로 하천/육상/산림 골재의 물리적 특성값을 분석하였다. 하천/육상골재는 18개 시험 항목과 산림 골재는 12개 시험 항목에 대해 각각 유역과 지질에 따라 분류하였다. 물리적 특성으로 유역별 하천골재는 금강 유역이 2.5 mm, 1.2 mm, 0.6 mm, 0.3 mm, 0.15 mm, 0.08체 통과량과 낙동강유역은 점토덩어리와, 섬진강유역은 10 mm, 5 mm, 2.5 mm, 1.2 mm, 0.6 mm, 0.3 mm, 0.15 mm, 0.08체 통과량, 안정성과, 영산강유역은 10 mm, 5 mm, 2.5 mm, 1.2 mm, 0.6 mm, 0.3 mm, 0.08체 통과량과, 한강유역은 10 mm, 0.6 mm, 0.08체 통과량, 실적율이 평균의 표준오차가 다른 물리적 특성과는 다른 분포 양상을 보이는 것으로 분석됐다. 분산분석은 18개 항목 중 흡수율과 실적율을 제외한 16개 항목이 권역별로 평균에 통계적으로 유의한 차이가 있는 것으로 분석됐다. 또한, 유역별 육상골재는 금강유역을 제외한 낙동강유역이 점토덩어리와, 섬진강유역은 10 mm, 5 mm과, 영산강유역은 0.08체 통과량과, 한강유역은 10 mm, 0.6 mm, 0.08체 통과량이 평균의 표준오차가 다른 물리적 특성과는 다른 분포 양상을 보이는 것으로 분석됐다. 분산분석은 18개 항목 모두 권역별로 평균에 통계적으로 유의한 차이가 있는 것으로 분석됐다. 그리고, 지질별 산림골재는 화성암을 제외한 변성암이 공극률과, 퇴적암은 마모율과 공극률이 다른 물리적 특성과는 다른 분포 양상을 보이는 것으로 분석됐다. 분산분석은 표면건조밀도와 절대건조밀도, 진밀도, 단위용적질량, 흡수율, 마모율, 실리카중합비(Sc/Rc) 항목이 지질별로 평균에 통계적으로 유의한 차이가 있는 것으로 분석됐다.

ATHEROSCLEROSIS, CHOLESTEROL AND EGG - REVIEW -

  • Paik, I.K.;Blair, R.
    • Asian-Australasian Journal of Animal Sciences
    • /
    • 제9권1호
    • /
    • pp.1-25
    • /
    • 1996
  • The pathogenesis of atherosclerosis can not be summarized as a single process. Lipid infiltration hypothesis and endothelial injury hypothesis have been proposed and investigated. Recent developments show that there are many points of potential interactions between them and that they can actually be regarded as two phases of a single, unifying hypothesis. Among the many risk factors of atherosclerosis, plasma homocysteine and lipoprotein(a) draw a considerable interest because they are independent indicators of atherogenicity. Triglyceride (TG)-rich lipoproteins (chylomicron and VLDL) are not considered to be atherogenic but they are related to the metabolism of HDL cholesterol and indirectly related to coronary heart disease (CHD). LDL can of itself be atherogenic but the oxidative products of this lipoprotein are more detrimental. HDL cholesterol has been considered to be a favorable cholesterol. The so-called 'causalist view' claims that HDL traps excess cholesterol from cellular membranes and transfers it to TG-rich lipoproteins that are subsequently removed by hepatic receptors. In the so-called 'noncausalist view', HDL does not interfere directly with cholesterol deposition in the arterial wall but instead reflects he metabolism of TG-rich lipoproteins and their conversion to atherogenic remnants. Approximately 70-80% of the human population shows an effective feedback control mechanism in cholesterol homeostasis. Type of dietary fat has a significant effect on the lipoprotein cholesterol metabolism and atherosclerosis. Generally, saturated fatty acids elevate and PUFA lower serum cholesterol, whereas MUFA have no specific effect. EPA and DHA inhibit the synthesis of TG, VLDL and LDL, and may have favourable effects on some of the risk factors. Phospholipids, particularly lecithin, have an antiatherosclerotic effect. Essential phospholipids (EPL) may enhance the formation of polyunsaturated cholesteryl ester (CE) which is less sclerotic and more easily dispersed via enhanced hydrolysis of CE in the arterial wall. Also, neutral fecal steroid elimination may be enhanced and cholesterol absorption reduced following EPL treatment. Antioxidants protect lipoproteins from oxidation, and cells from the injury of toxic, oxidized LDL. The rationale for lowering of serum cholesterol is the strong association between elevation of plasma or serum cholesterol and CHD. Cholesterol-lowing, especially LDL cholesterol, to the target level could be achieved using diet and combination of drug therapy. Information on the link between cholesterol and CHD has decreased egg consumption by 16-25%. Some clinical studies have indicated that dietary cholesterol and egg have a significant hypercholesterolemic effect, while others have indicated no effect. These studies differed in the use of purified cholesterol or cholesterol in eggs, in the range of baseline and challenge cholesterol levels, in the quality and quantity of concomitant dietary fat, in the study population demographics and initial serum cholesterol levels, and clinical settings. Cholesterol content of eggs varies to a certain extent depending on the age, breed and diet of hens. However, egg yolk cholesterol level is very resistant to change because of the particular mechanism involved in yolk formation. Egg yolk contains a factor of factors responsible for accelerated cholesterol metabolism and excretion compared with crystalline cholesterol. One of these factors could be egg lecithin. Egg lecithin may not be as effective as soybean lecithin in lowering serum cholesterol level due probably to the differences of fatty acid composition. However, egg lecithin may have positive effects in hypercholesterolemia by increasing serum HDL level and excretion of fecal cholesterol. The association of serum cholesterol with egg consumption has been widely studied. When the basal or control diet contained little or no cholesterol, consumption of 1 or 2 eggs daily increased the concentration of plasma cholesterol, whereas that of the normolipemic persons on a normal diet was not significantly influenced by consuming 2 to 3 eggs daily. At higher levels of egg consumption, the concentration of HDL tends to increase as well as LDL. There exist hyper-and hypo-responders to dietary (egg) cholesterol. Identifying individuals in both categories would be useful from the point of view of nutrition guidelines. Dietary modification of fatty acid composition has been pursued as a viable method of modifying fat composition of eggs and adding value to eggs. In many cases beneficial effects of PUFA enriched eggs have been demonstrated. Generally, consumption of n-3 fatty acids enriched eggs lowered the concentration of plasma TG and total cholesterol compared to the consumption of regular eggs. Due to the highly oxidative nature of PUFA, stability of this fat is essential. The implication of hepatic lipid accumulation which was observed in hens fed on fish oils should be explored. Nutritional manipulations, such as supplementation with iodine, inhibitors of cholesterol biosynthesis, garlic products, amino acids and high fibre ingredients, have met a limited success in lowering egg cholesterol.

구르타민 산발효잔사가공물(酸醱酵殘渣加工物)의 성질(性質)과 비효 -I. 그 성질(性質)과 옥수수에 대(對)한 비효 (The Chemical Properties and Fertilizer Effect of a Residual By-product of Glutamic Acid Fermentation -I. Chemical properties and effect on the growth of corn)

  • 홍종운;정이근;박천서;김영섭
    • 한국토양비료학회지
    • /
    • 제6권3호
    • /
    • pp.159-163
    • /
    • 1973
  • 당밀(糖密)을 원료(原料)로 하여 발효법(醱酵法)으로 구르타민산(酸)소다를 제조(製造)할 때 부생(副生)하는 잔사(殘渣)를 가공(加工)하여 만든 구르타민산잔사가공비료(酸殘渣加工肥料) 시제품(試製品)에 대(對)하여 그 성질(性質)을 조사(調査)하고 그 비효를 요소(尿素), 퇴비(堆肥) 및 미강(米糠)과 대비(對比)해 옥수수 재배시험(栽培試驗)을 통(通)하여 검토(檢討)했든바 그 결과(結果)를 요약(要約)하면 아래와 같다. 1) 공시(供試) 구르타민산잔사가공물(酸殘渣加工物)은 유안(硫安), 염안(鹽安) 및 종류미상(種類未詳)의 복염등(複鹽等)의 무기물(無機物)과 수용성(水溶性) 아미노산류(酸類) 및 불용성(不溶性) 탄소화합물(炭素化合物)의 혼합물(混合物)임이 밝혀졌다. 2) 이 물질(物質)에 함유(含有)된 속효성N비료부분(肥料部分)의 효과는 요소(尿素)와 대등(對等)하다. 3) 이 물질(物質)에 함유(含有)된 유기물(有機物)은 옥수수의 수량(收量)에 미친 효과면에서 퇴비(堆肥)나 미강(米糠)과 대등(對等)한것 같다. 4) 이 물질(物質)의 시용(施用)은 옥수수의 양분흡수(養分吸收)나 기타(基他) 생리작용(生理作用)에 특이성(特異性)있는 해(害)를 미치지 않았다. 5) 이 물질(物質)에 함유(含有)된 유기물(有機物)이 토양중(土壤中) 철(鐵)의 유효화에 미치는 영향(影響)이 타유기물(他有機物)과 상이(相異)할 가능성(可能性)이 있음을 논(論)했다. 6) 이 물질(物質)의 시용(施用)은 토양(土壤)을 산성화(酸性化) 시키는 경향(傾向)이 뚜렷하며 토양중(土壤中) 가급태유황(可給態硫黃)과 토양유기물함량(土壤有機物含量)을 높이는 경향(傾向)이 있었다.

  • PDF

SWAT 및 CE-QUAL-W2 모델을 연계 활용한 기후변화 시나리오에 따른 용담댐 유입수 및 호내 수질 변화 예측 (Water quality prediction of inflow of the Yongdam Dam basin and its reservoir using SWAT and CE-QUAL-W2 models in series to climate change scenarios)

  • 박종태;장유진;서동일
    • 한국수자원학회논문집
    • /
    • 제50권10호
    • /
    • pp.703-714
    • /
    • 2017
  • 본 연구에서는 IPCC가 발간한 AR5 의 시나리오 중 임의로 선택된 RCP 4.5와 RCP 8.5 기후변화 시나리오가 용담댐 유역과 호내의 유량과 수질변화에 미치는 영향을 분석 및 그 방법론을 수립하기 위해서 SWAT 모델과 CE-QUAL-W2 모델을 차례로 사용하였다. 기후변화 시나리오는 용담댐 유역에 대해 상세화 된 자료를 사용하였으며 2016~2095년의 기간을 2016~2035년, 2036~2065년 그리고 2066~2095년의 세 가지의 기간으로 구분하고 또한 각 연도별로 5월과 10월 사이의 우기(Wet Season)와 11월과 4월 사이의 건기(Dry Season)로 또한 구분하여 분석하였다. 전체 모의 기간에 대해 산술평균한 용담댐 유역의 유량과 TSS 및 TP는 RCP 4.5가 RCP 8.5 보다 큰 것으로 나타나고 TN의 경우 다른 경향을 나타내었다. 반면, 모델의 예측결과를 기간별 또는 연중 강우특성별로 구별하여 분석한 경우에는 각 경우마다 서로 다른 결과를 나타내고 있다. 기후변화 시나리오가 진행됨에 따라 전반적으로 강우일수는 감소하고 강우강도는 증가하여 갈수기에는 오염물질의 유출이 감소하고, 홍수기에는 오염물질의 유출이 증가하여 연간 오염물질 유출량이 홍수기에 집중되는 특성을 나타내었다. 상기와 동일한 기간에 대해 SWAT 모델에서 생성된 유역의 자료를 CE-QUAL-W2 모델의 경계조건으로 사용하여 용담댐의 수질변화특성을 모의하였다. TSS와 TP농도는 하절기 강우량의 증가에 따라 특히, 높은 값을 나타내는 것으로 분석되었으나, 고형물질에 잘 흡착되지 않는 TN은 다른 경향이 나타났다. 따라서 기후변화에 의한 장래의 유량 및 수질 변화는 전반적인 경향과 더불어 지역적, 시기적 특성을 또한 반영하여 분석하는 것이 바람직하다고 판단되며 이에 따라 갈수 및 홍수에 의한 시기별, 지역별 유량 및 수질 관리 대책이 별도로 필요할 것으로 판단된다.

탈지 대두분 첨가가 제빵 특성에 미치는 영향 (Effect of Defatted Soy flour on the Bread Making Properties of Wheat flour)

  • 유양자;장학길;최영심
    • 한국식품조리과학회지
    • /
    • 제21권3호
    • /
    • pp.301-310
    • /
    • 2005
  • 본 연구에서는 빵의 재료로 열량이 낮고 단백질이 우수하고 지방이 적은 탈지 대두분의 이용 효과를 극대화시켜 이를 이용한 기능성 제빵을 제조하기 위해 탈지 대두분을 첨가하여 제빵을 제조하여 제빵 적성 및 품질 특성을 살펴본 결과는 다음과 같다. 입도 분포는 전반적으로 밀가루와 탈지 대두분이 $45\~75{\mu}m$에 속하였다. 일반성분 분석은 밀가루는 수분함량 $13.12\%$, 조지방 $2.24\%$, 조단백 $12.91\%$, 회분 $0.49\%$이었고 탈지 대두분은 수분 $8.68\%$, 조지방 $0.75\%$, 조단백 $47.7\%$, 회분 $7.08\%$이었다. Pelshenke test는 대조구가 113.4분이고 탈지 대두분 $12\%$ 첨가구가 105.9분이었고 sedimentation value는 대조구가 66mL, 탈지 대두분 $12\%$가 42mL로 탈지 대두분의 첨가량이 증가할수록 감소하는 경향을 보였다. Water holding capacity와 alkaline water holding capacity는 대조구에 비해 탈지 대두분의 첨가량이 증가할수록 증가되고 flour swelling volume는 감소되었다 Mixograph는 탈지 대두분 첨가에 따라 midline peak time은 유의적으로 차이가 없었고 midline peak height는 탈지 대두분 첨가량이 증가할수록 작은 값을 나타내고 첨가구간에 유의적인 차이가 나타났다. Right of peak slope는 첨가량이 증가됨에 따라 점점 낮게 나타났으며 width at peak와 함께 첨가량에 따라 유의적인 차이가 없었으나 width at 8 min은 유의적인 차이를 보였다. 탈지 대두분 첨가량이 증가할수록 비체적은 감소하였으며 빵 표피의 색도는 탈지 대두분 첨가량이 증가할수록 L 값과 b값은 감소되고 a값과 AE값은 증가하였다. 빵 속의 색도는 L 값과 ${\Delta}E$값은 감소하고 a값과 b값은 증가하였다. 탈지 대두분의 첨가량이 증가할수록 springiness, cohesiveness은 증가하고 gumminess, chewiness은 감소며 유의적인 차이를 보였다. 탈지 대두분으로 제조한 빵의 저장기간에 따른 hardness는 $2.5^{\circ}C$의 저장보다 $5^{\circ}C$의 저장이 빠르게 증가함을 보여 $25^{\circ}C$에서 저장하는 것이 노화 지연 효과가 있었다. 관능 검사에서는 부피와 맛은 탈지 대두분 첨가량에 따라 유의적인 차이가 없었고 그 외의 평가 항목은 유의적인 차이가 나타났다. 부피, 빵 표피 색, 기공, 조직감, 빵 속의 색, 향, 맛은 대조구를 가장 선호하였으며 $12\%$ 첨가구의 경우가 가장 낮은 선호도를 보였으며 첨가량이 증가할수록 선호도가 유의적으로 감소하는 경향을 보였다. 이상에서 살펴본 봐와 같이 빵의 주원료인 밀가루 대신 탈지 대두분을 사용할 때 빵의 품질평가에 중요한 요인인 부피와 관능적 특성에 의해 탈지 대두분을 $4\%$까지 첨가한 것이 기능성 식품으로의 이용 가능성이 있다고 할 수 있다.

내화처리합판(耐火處理合板)의 열판건조(熱板乾燥)에 관(關)한 연구(硏究) (Studies on Press Drying of Fire-Retardant Treated Plywood)

  • 김종만
    • 한국산림과학회지
    • /
    • 제56권1호
    • /
    • pp.1-25
    • /
    • 1982
  • 건책물(建策物)의 내장(內裝)에 많이 사용(使用)하고 있는 합판(合板)은 가연성(可燃性) 물질(物質)로서 각종(各種) 대형(大型) 화재(火災)를 유발(誘發)하여 많은 인명(人命)과 재산(財産)의 손실(損失)을 초래(招來)하고 있다. 따라서 이로 인(因)한 피해(被害)를 최대한(最大限)으로 줄이기 위하여 내화합판(耐火合板) 제조(製造)의 필요성(必要性)이 절실(絶實)히 요구(要求)되며 또한 내화합판(耐火合板) 제조(製造)에서 우선적(優先的)으로 해결(解決)해야 될 합판(合板)의 건조(乾燥)에 관(關)해서 연구(硏究)할 필요가 있다고 생각한다. 본(本) 연구(硏究)에서는 3.5mm으로 합판(合板)과 5.0mm 합판(合板)에 황산(黃酸)암모늄, 제(第) 1 인산(燐酸) 암모늄, 제(第) 2 인산(燐酸) 암모늄 및 수분처리(水分處理)는 6 및 9시간(時間)으로 처리(處理)하고 붕사(硼砂)-붕산(硼酸) 및 미나리스는 1, 3, 6 및 9시간(時間)으로 처리(處理)하였으며 90, 120 및 $150^{\circ}C$ 등(等)으로 열판건조(熱板乾燥) 실시(實施)한 후(後), 건조곡선(乾燥曲線), 건조속도(乾燥速度), 내화제(耐火劑)의 흡수량(吸收量) 및 내화도(耐火度) 등(等)을 연구검토(硏究檢討)한 결과(結果)를 요약(要約)하면 다음과 같다. 1) 온냉욕법(溫冷浴法)으로 9후간(後間)의 내화처리(耐火處理) 실시(實施)하므로써 얻은 두께 3.5mm합판(合板)의 약제(藥劑) 보유량(保留量)은 제(第) 1 인산(燐酸) 암모늄 $1.353kg/(30cm)^3$, 제(第) 2 인산(燐酸) 암모늄 $1.331kg/(30cm)^3$, 황산(黃酸)암모늄 $1.263kg/(30cm)^3$ 붕사(硼砂)-붕산(硼酸) $1.226kg/(30cm)^3$으로 최저(最低) 보유량(保留量)에 도달(到達)하였으나 미나리스는 $0.906kg/(30cm)^3$로 미달(未達)되었다. 두께 5.0mm 합판(合板)의 약제(藥劑) 보유량(保留量)은 황산(黃酸)암모늄 $1.356kg/(30cm)^3$, 제(第) 2 인산(燐酸) 암모늄 $1.166kg/(30cm)^3$로서 최저(最低) 보유량(保留量)에 도달(到達)하였으나 제(第) 1 인산(燐酸) 암모늄, 붕사(硼砂)-붕산(硼酸)과 미나리스는 미달(未達)이었다. 2) 3.5mm와 5.0mm 합판(合板)의 건조곡선(乾燥曲線)은 6시간(時間)과 9시간(時間)의 내화처리(耐火處理)에서 약제처리(藥劑處理) 합판(合板)이 수분처리(水分處理) 합판(合板)보다 건조곡선(乾燥曲線)의 경사(傾斜)가 더 적었다. 그리고 두께에 따른 건조속도(乾燥速度)는 3.5mm 합판(合板)의 경우(境遇) 5.0mm 합판(合板) 건조속도(乾燥速度)보다 약(約) 3배(倍) 이상(以上) 더 빨랐다. 3) 약제별(藥劑別) 건조속도(乾燥速度)는 열판온도(熱板溫度) $120^{\circ}C$로 건조(乾燥)하였을 때 두께 3.5mm의 합판(合板)에서 제(第) 2 인산(燐酸) 암모늄이 가장 높은 경향(傾向)을 나타내었고 두께 5.0mm의 합판(合板)에서도 제(第) 2 인산(燐酸) 암모늄이 가장 높은 경향(傾向)을 나타내었다. 그러나 처리시간(處理時間) 6시간(時間) 이상(以上)에서 수분처리(水分處理) 합판(合板)의 건조속도(乾燥速度)가 더욱 높았다. 4) 열판온도(熱板溫度)에 따른 건조속도(乾燥速度)는 열판온도(熱板溫度)가 상승(上昇)함에 따라 뚜렷하게 상승(上昇)하였으며 두께 3.5mm 합판(合板)의 경우(境遇) 열판온도(熱板溫度) 90, 120 및 $150^{\circ}C$에서 각각(各各) 1.23%/min., 6.54%/min., 25.75%/min. 였고 두께 5.0mm의 합판(合板)에서는 각각(各各) 0.55%/min., 2.49%/min., 8.19%/min.를 나타내었다. 5) 내화처리(耐火處理) 합판(合板)의 내화도(耐火度)에 있어서 약제(藥劑)사이의 중량(重量) 감소율(減少率)은 두께 3.5mm와 5.0mm 합판(合板)에서 제(第) 2 인산(燐酸) 암모늄이 가장 적었고 다음은 제(第) 1 인산(燐酸) 암모늄이었으며 그 다음은 황산(黃酸)암모늄, 미나리스 및 붕사(硼砂)-붕산(硼酸)의 순서(順序)로 증가(增加)하였다. 착화시간(着火時間), 잔화시간(殘火時間), 이면(裏面)의 탄화면적(炭火面積)에 있어서는 제(第) 2 인산(燐酸) 암모늄이 가장 우수(優秀)하였고, 다음은 제(第) 1 인산(燐酸) 암모늄, 황산(黃酸) 암모늄, 붕사(硼砂)-붕산(硼酸), 미나리스순(順)으로 효과(効果)를 나타냈다.

  • PDF