• Journal of the Korean Solar Energy Society
• /
• 제22권4호
• /
• pp.35-43
• /
• 2002

This research makes that quantitative radiation property of an actual town ward is obtained in quest of the parameter with regard to a radiation heat transfer property and set up several town ward models that reproduced a solid form of a city along the attribute of the city. A regular trend possibility that is able to evaluate a radiation characteristics of a town ward quantitatively from a town ward guideline and confirmation that is produced about each parameter as a result of a numerical value simulation it obtained. This research shot a coefficient of Gebhart's emission absorption. sky radiation absorption rate direct solar radiation absorption rate the parameter with regard to a radiation heat transfer characteristics of a town ward in each town ward model and a volume rate of a town ward advances case study under regular such condition and shot the absorption rate, direct and others days and calculated an absorption rate and checked about the relation between a town ward and each radiation heat transfer property of a city.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 한국전기전자재료학회 2004년도 추계학술대회 논문집 Vol.17
• /
• pp.297-300
• /
• 2004

In this paper, we investigated insulation property of epoxy resin which includes elastomers to improve mechanical property, as varied to additive elastomer contents and to moisture absorption. There are four samples with 5[phr], 10[phr], 15[phr] and 20[phr]. we experimented to acquire insulation property(absorption rate, dissolution rate, apparent rate) and electrical property(perittivity, $tan\delta$, BDV) during respectively the time such as 6[h], 12[h], 18[h], 24[h] for moisture absorption. According to the experimental results, it is appeared that when the additive elastomer contents are increasing or when specimens remain more moisture, absorption rate, dissolution rate, permittivity and $tan\delta$ are slightly increasing but apparent rate and BDV(break-Down Voltage) strength are decreasing in particular, elastomer content [20]phr appeared remarkedly the more increase or decrease than others.

• Journal of Navigation and Port Research
• /
• 제34권2호
• /
• pp.111-115
• /
• 2010

In this paper, the electromagnetic (EM) wave absorbers using TiO2 as a dielectric material with chlorinated polyethylene (CPE) were investigated in W-band radio frequencies. We compared the relative permittivity with reflectionless curve and the absorption properties of samples containing 40 wt.%, 50 wt.%, 60 wt.%, 70 wt.%, and 80 wt.% TiO2. It is possible to realize a complex relative permittivity satisfying the reflectionless condition by choosing composition ratio of TiO2. The optimized composition ratio of TiO2 for the maximum absorption property is about 70 wt.%. As a result, we have confirmed the realization of an EM wave absorber with a high absorption property in W-band radio frequencies.

• Journal of the Korean Wood Science and Technology
• /
• 제46권6호
• /
• pp.703-712
• /
• 2018

The sound absorption property, hand feel, air permeability and pore size of 25 kinds of traditional Korean natural wallpapers (Hanji) were measured and analyzed in this study. The sound absorption rate of Hanji became larger with increasing of frequency beginning from 3.2 kHz, reached 2 times in frequency range of nearby 4 kHz. The sound absorption rate of Hanji was increased as the permeability was lowered and the pore size was decreased. The sound absorption property of Hanji wallpaper could be improved by manufacturing process such as super calendering process.

• Journal of the Korea Furniture Society
• /
• 제27권2호
• /
• pp.91-95
• /
• 2016

This study was conducted to investigate the relationship between water absorption (or hygroscopic property) and growth rate of rubra oak (Quercus rubra) from 5 different origins of seed (Carleton, Simcoe, Chatham, Bancroft, Unknown). Water absorption at cross section of Quercus rubra was $0.43{\sim}0.92g/cm^2$ and the property was not related with growth rate. Overall equilibrium moisture content of rubra oak were 11.35~11.56% and 15.15~15.83% at $40^{\circ}C$ with 75% and 90% relative humidities, respectively. There was no relationship between growth rate and moisture content(hygroscopy) in rubra oak. Based on the results, Rubra oak can be classified as a low hygroscopic wood grade, and thus might be a good raw material for furniture productions owing to its superior dimensional stability.

• Journal of the Korean Home Economics Association
• /
• 제30권3호
• /
• pp.101-117
• /
• 1992

Effects of gamma irradiation(2.5∼20kGy) on water absorption property was studied for a local variety of black soybeans. In water absorption patterns of black soybeans, the time to reach a fixed moisture content was reduced depending on the increment of water soaking temperature and irradiation dose. Irradiation at 2.5∼10kGy resulted in the reduction of soaking time of black soybeans by about 1∼3 hours and the increase of hydration capacity by 10∼20%, respectively, compared to the nonirradiated control black soybean. The water uptake rate constant of the irradiated black soybean difinitely increased with the increase of dose levels and water soaking temperature. The activation energy for water absorption and z-value were lower in the irradiated black soybeans than in the nonirradiated control black soybean. The efficacy of water absorption property in the irradiated black soybeans was also recognized after one year of storage at room temperature.

• Journal of the Korean Wood Science and Technology
• /
• 제38권2호
• /
• pp.101-107
• /
• 2010

Heat treatment was performed to improve sound absorption properties for four tree species; Tulip tree, Korean Paulownia, Red pine and Costata birch, at temperature of $175^{\circ}C$ and $200^{\circ}C$under vacuum condition. Sound absorption properties of two kinds of boards, which were in radial and tangential sections, were measured under a frequency range of 100 to 3200 Hz by the two microphone transfer function method. It was found that sound absorption properties were increased by heat treatment and the efficiency was higher at $200^{\circ}C$ than that at $175^{\circ}C$. Even Costata birch had a little effect on low temperature of $175^{\circ}C$, $200^{\circ}C$ heat treatment for sound absorption property, the efficiencies of sound absorption were 14, 19%, respectively. The efficiencies of sound absorption ranged 22 to 120% for heat-treated Tulip tree, Korean Paulownia.

• Journal of the Korean Society of Clothing and Textiles
• /
• 제28권3_4호
• /
• pp.539-545
• /
• 2004

In this study, the effect of washing, bleaching, and abrasion on tactile and the water absorption properties of the split-type Nylon/Polyester (N/P) microfiber pile-knit was investigated under various enduse conditions. We examined the water absorption and surface properties of PET microfiber which will be very useful in the future. We also studied the variations of their performance during usage caused by friction and repeated washing, regard to all kinds of physical, chemical changes which will appear while using those textiles. Progress in further splitting of PET microfiber fabric is observed with increases in the number of washing and bleaching cycles, and treatment temperature. Initial water absorption (%) was increased with progress in splitting, which provided efficient capillary channel. Surface properties were varied with additional splitting by washing and abrasion. Formation of pilling and splitting by abrasion increase surface roughness, diminishing tactile property, and reduced water absorption property. The current results from this study is expected to provide the appropriate washing management guide to consumers, and to inform end-use performance of product to a producer for improving product quality.

• International Journal of Internet, Broadcasting and Communication
• /
• 제10권4호
• /
• pp.1-5
• /
• 2018

The property of magnetic field and properties of EMW(Electro Magnetic Wave) absorption with multi-shaped EMW absorber was simulated. As a magnetic field having high density was showed at bottom of EMW absorber, simulation showed that overall EMW was absorbed at the bottom of multi-shaped absorber. The absorption properties of EMW according to thickness of absorber showed that it enhanced about 50-60 percent. Also, EMW absorption properties was checked with surface area of EMW absorber. A cylinder-shaped EMW absorber exhibited good property among multi-shaped EMW absorber based on these result.

• KIEAE Journal
• /
• 제13권2호
• /
• pp.107-112
• /
• 2013

The purpose of this study is to analyze an insulation property and to establish a design standard for the underground space in architecture. Insulation materials for this study are 12 kinds of Insulation which qualified KS standards(3 classes of EPS type 1, 3 classes of EPS type 2(Neopor), 3 classes of XPS and 3 classes of PU Boards). For insulation materials of underground space, insulating and water tightening property are desired. So conductivity for insulating and water absorption for water tightening are measured in this study. Temperature, insulation is exposed to in the underground space, is different from temperature above the ground. Conductivity is measured in a temperature of $17^{\circ}C$, $20^{\circ}C$, $23^{\circ}C$ and $26^{\circ}C$. In KS standards, water absorption are measure after 24 hours, but insulation is exposed to water for a long time in the underground. So after 110 days, water absorption are measured. As time goes by, increasing of water absorption means decreasing of water tightening and insulating. So after water absorption had measured for 110 days, conductivity has measured again. As a result, XPS is selected as optimized insulation for underground. And Conductivity of XPS insulation with water should be added by 20%.