• 제목/요약/키워드: Absorption capacity

검색결과 903건 처리시간 0.027초

연소전 조건에서 탄산칼륨계 흡수제의 이산화탄소 흡수특성 (Absorption of CO2 in Aqueous K2CO3 Absorbents at Pre-Combustion Condition)

  • 유승한;오명석;차왕석
    • 한국산학기술학회논문지
    • /
    • 제12권2호
    • /
    • pp.993-998
    • /
    • 2011
  • 기액 흡수평형(VLE)장치를 사용하여 연소전 조건에서 흡수용액인 $K_2CO_3$의 이산화탄소 흡수능 및 초기흡수속도를 측정하였다. 흡수실험은 온도 $40{\sim}80^{\circ}C$, 이산화탄소 압력 0~50기압 범위에서 수행되었으며, 또한 흡수용액 중 $K_2CO_3$ 농도에 따른 흡수능 변화도 조사하였으며 이때 농도변화는 5~20%이었다. 실험결과, 흡수용액 중 $K_2CO_3$ 농도가 증가할수록 이산화탄소 흡수능과 초기흡수속도는 증가하였으며, 반응온도에 따른 초기흡수속도는 $40^{\circ}C$에서 가장 높았다. $K_2CO_3$ 흡수용액의 흡수능을 증진시키기 위해 Piperazine과 homopiperazine을 각각 첨가하여 흡수 실험한 결과 Piperazine을 첨가한 경우가 이산화탄소 흡수능을 다소 증진시킴을 알 수 있었다.

Ni 첨가량에 따른 중력 주조 Mg-Ni 합금의 수소화 반응 특성의 변화 (Change of Hydriding Properties of Gravity Cast Mg-Ni Alloys with Ni Content)

  • 임창동;문용민;유봉선;나영상;배종수
    • 한국수소및신에너지학회논문집
    • /
    • 제15권3호
    • /
    • pp.250-256
    • /
    • 2004
  • Magnesium and its alloys have the high potential as hydrogen storage materials because of their highest hydrogen storage capacity, low density and abundant resources. But poor kinetic properties of hydriding and dehydriding and high working temperature have limited their practical applications. In this study, the Mg-Ni binary alloys with different amount of Ni were produced by gravity casting and characterized in order to investigate the relationship between the microstructures and hydriding properties. The maximum hydrogen absorption capacity decreased, but the absorption kinetics increased with Ni content. The difference in the absorption kinetics was resulted from the differences in the sort and shape of primary solid phases and eutectic microstructure.

홍게 가공회수 단백질의 용해도, 유화력 및 안정성 (Solubility, Emulsion Capacity, and Emulsion Stability of Protein Recovered from Red Crab Processing Water)

  • 김용진;신태선;오훈일
    • 한국식품영양학회지
    • /
    • 제9권3호
    • /
    • pp.319-324
    • /
    • 1996
  • The functional properties of protein recovered from red crab (Chitinonecetes opiiie) processing in water (RCP) were examined and compared with those of soybean protein isolate at pH 2~10 in water and NaCl solu5ion. The solubilities of RCP and SPI were miniumu at pH 4, the isoelectric point and increased significantly at lower or higher than pH 4. Solubilities in NaCl solution for both proteins decreased with incr NaCl concentration increase at all pH ranges. Emulsion capacity for both proteins was also minimum at pH 4 and increased as protein concentration increased from 2 to 6%. Emulsion capacity of RCP was higher than these of SPI at pH 6∼10 and all protein concentrations. Emulsion stability showed a similar trend to that of emulsion capacity. RCP had higher oft absorption capacity and lower water absorption capacity than SPI.

  • PDF

다중매개모델에서 bootstrapping기법을 이용한 흡수능력의 매개효과 분석 (A Mediation Analysis of Absorption Capacity by Bootstrapping Technique in Multiple Mediator Model)

  • 김현우;이홍배;신용호
    • 한국시뮬레이션학회논문지
    • /
    • 제24권4호
    • /
    • pp.89-96
    • /
    • 2015
  • 매개효과 검정기법으로 널리 사용하고 있는 Baron and Kenny 접근법, Sobel, Aroian, Goodman 검정법들의 통계적 검정력이 약할 뿐만 아니라, 정확하지 않다는 비판이 대두되면서, bootstrapping 기법이 대안으로 제시되고 있다. 이에 본 연구는 bootstrapping 기법을 토대로 세 개 이상의 변수로 구성된 다중매개모델에서의 매개효과 검정을 위해 가상의 phantom 변수를 도입하여 검정하였다. 특히, 경영전략분야의 자원기준관점 연구에서 진행되고 있는 조직자원과 매개변수 흡수능력, 그리고 기술사업화역량 관계 모델을 다중매개모델로 설정하여, bootstrapping 접근방법과 phantom 변수 설정을 통해 총간접효과 크기와 유의확률을 계산하고, 흡수능력의 매개효과를 검정하였다. 검정결과 매우 효율적이고, 체계적인 매개효과 검정이 가능하였음을 확인할 수 있었으며, 인적자원과 물적자원의 자원 특성에 따라 흡수능력의 매개 특성도 차이가 있음을 확인하였다.

기술혁신형 중소기업의 조직요인이 경영성과에 미치는 영향: 흡수역량의 매개효과를 중심으로 (Influence of Organizational Factors on Business Performance in INNOBIZ SMEs: Focusing on the Mediating Effects of Absorption Capacity)

  • 성기욱;엄기용
    • 한국산업정보학회논문지
    • /
    • 제27권3호
    • /
    • pp.59-88
    • /
    • 2022
  • 개방형 혁신이 확산되면서 외부의 새로운 지식을 탐색하고 이를 조직의 기존 지식과 결합하여 활용하는 흡수역량이 기업의 경영성과를 높이는 데 중요한 역할을 하는 것으로 평가되고 있다. 본 연구는 기술혁신형 중소기업에서 흡수역량을 매개로 조직 요인인 임파워링 리더십, 조직학습 문화 그리고 부서간 협력이 경영성과에 미치는 영향을 실증적으로 분석하였다. 이를 위해 이노비즈 협회 회원사 15,227개 기업을 대상으로 설문조사를 수행하였으며, 수집된 326건의 설문응답 내용을 구조방정식 모형을 이용하여 분석하였다. 설문 분석결과에 의하면 조직 요인인 임파워링 리더십, 조직학습 문화 및 부서간 협력은 경영성과에 직접적인 영향은 주지 않았지만, 흡수역량을 매개로 경영성과에 유의한 영향을 주는 것으로 나타났다. 이러한 결과는 임파워링 리더십, 조직학습 문화 및 부서간 협력이 흡수역량의 매개효과를 통해 경영성과에 간접적인 영향을 주고 있음을 의미하는 동시에, 기업의 조직 요인들이 흡수역량의 선행요인 중의 하나로 작용함을 입증해준다.

흡열제가 첨가된 일회용 기저귀의 착용이 유아의 온열생리적 반응에 미치는 영향 (Effects of wearing disposable diaper with the endothermic agent on thermal responses of infant)

  • 성유진;이수원
    • 한국의류학회지
    • /
    • 제23권4호
    • /
    • pp.499-509
    • /
    • 1999
  • This study was carried out to investigate the effects of wearing disposable diaper with the endothermic agent on thermoregulatory response of infant. Five healthy female infants aged about 5 months were taken as a subject of this experiment. Experimental diapers were six kinds of disposable diaper constructed of nonwoven tissue, fluff pulp, super absorbent polymer, back sheet film, leg elastic, and 0g urea(A) 1g urea(B) , 2g urea(C), 3g urea (D), 4g urea(E) 5g, urea(F) respectively. Urea(98% or over purity) was used as an endothermic agent. Experiment was proceeded while infants were sleeping at 27.5$\pm$0.5$^{\circ}C$, 50$\pm$5% R.H, 0.04m/sec. Each disposable diaper's properties was tested. During the experiment rectal temperature skin temperature of 9 areas temperature inside the disposable diapers were measured, the results were as follows : 1) There was not significant difference among the diapers in absorption capacity retention capacity and rewet(p=0.05). The absorption under load was showed to A, B,

  • PDF

중소기업의 환경요인과 흡수역량을 통한 Smart Factory 구축 연구 (A Study on the Establishment of Smart Factory through the Environmental Factors and Absorption Capacity of Small and Medium Businesses)

  • 진성옥;서영욱
    • 융합정보논문지
    • /
    • 제9권7호
    • /
    • pp.67-77
    • /
    • 2019
  • 많은 중소기업이 Smart Factory를 구축할 때 기업 내 외부의 환경변화나 구성원들의 역량 등 기업이 처해있는 상황에 대한 충분한 고려 없이 구축하고 있다. 그래서 구축 후 활용도와 효과도 낮다. 본 연구는 '중소기업의 환경요인과 흡수역량을 통한 Smart Factory 구축'을 실증연구를 통하여 검증해 보는 것이다. 설문은 Smart Factory를 구축한 중소기업에서 관련 업무를 하는 인원에게 받았다. 연구결과는, 첫째, 기업 내 외부의 환경요인은 기업 내부의 흡수역량에 긍정적인 영향을 미쳤다. 둘째, 기업 내부의 흡수역량은 Smart Factory 구축에 긍정적인 영향을 미쳤다. 위의 입증을 통해서 중소기업에서 Smart Factory를 구축할 때 기업의 내 외부 환경요인과 흡수역량을 바탕으로 Smart Factory 핵심영역을 구축하면 효과적이라는 것이 입증되었다. 향후는 Smart Factory 구축성과의 연구를 하고자 한다.

Heat Transfer Performance of Plate Type Absorber with Surfactant

  • Yoon, Jung-In;M. M. A. Sarker;Moon, Choon-Geun
    • Journal of Advanced Marine Engineering and Technology
    • /
    • 제28권2호
    • /
    • pp.243-251
    • /
    • 2004
  • Absorption chiller/heater can utilize the unused energy of the daily life waste heat, the industry waste heat. the solar energy and the earth energy. These can contribute to energy savings. But the absorption chiller/heater has a demerit that the size of absorption chiller/heater is larger than that of the vapor compression type based on same capacity. In this study. the experimental apparatus of an absorber is manufactured as a plate. which is newly applied in an absorber. The experimental apparatus is composed of a plate type absorber. which can increase the heat exchange area per unit volume and thus facilitating to deeply investigate more detail features instead of that done by the existing type. i.e.. horizontal tube bundle type. The characteristics of heat transfer and refrigeration capacity are studied experimentally. The absorption enhancement by using surfactant is closely examined through the experiment and comparative figures are presented in quantitative and qualitative analysis.

흡수식 칠러를 장착한 마이크로터빈 구동 열병합시스템의 성능 해석 (Performance Analysis of Microturbine CHP System with Absorption Chiller)

  • 윤린;한승동
    • 설비공학논문집
    • /
    • 제20권7호
    • /
    • pp.486-491
    • /
    • 2008
  • The performance of a microturbine CHP system equipped with an absorption chiller was analyzed by modeling it. The microturbine with recuperator was simulated with the Brayton cycle model. The mass flow rate and available heat energy of the exhaust gas from the microturbine were simulated. These results were utilized as input values for the generator of the absorption chiller. The absorption chiller is a single-effect air cooled type with a solution heat exchanger. The heat input into the generator was proportional to the heat transfer rate and the UA values of the heat exchangers of the absorption chiller. Furthermore, the COP of the absorption chiller increased with respect to an increase of the heat input into the generator, under the sufficient evaporator capacity condition. When the capacity of the CHP system increased from 30 to 60 kW, the mass flow rate of the LiBr for the absorption chiller doubled, and the UA values for evaporator and condenser increased by factors of x3.9 and x3.4, respectively, under the same COP condition.

알카놀아민 수용액을 이용한 이산화탄소 흡수특성 연구 (Study on Absorption Characteristics of $CO_2$ in Aqueous Alkanolamine Solutions)

  • 오상교;이영우;남성찬;윤여일;김영은
    • 에너지공학
    • /
    • 제17권4호
    • /
    • pp.241-246
    • /
    • 2008
  • 화석연료 사용에 의한 이산화탄소의 증가는 지구온난화의 주요인으로, 세계적으로 배출량을 줄이려는 노력을 기울이고 있다. 알카놀아민 수용액을 이용한 흡수법은 산성가스를 제거하기 위하여 폭 넓게 사용되고 있고, 특히 배가스로부터 나오는 이산화탄소의 제거에 효과적인 것으로 알려져 있다. 본 연구에서는 알카놀아민 수용액을 사용하여 이산화탄소 흡수시에 나타나는 흡수특성을 연구하였다. 기/액 평형 실험 장치를 사용하여 이산화탄소의 평형분압(${P_{CO_2}}^*$)과 이산화탄소 최초 1회 주입 후 평형에 도달하는 시간을 측정하여 $60^{\circ}C$에서 각각 흡수 용량과 흡수 속도를 계산하였다. 실험 결과 MEA 10wt%에서의 흡수용량은 낮은 온도($40^{\circ}C$)에서 우수하였고, 평형부하 0.5부근에서 이산화탄소가 포화되었음을 알 수 있었다. 흡수제에 따른 흡수용량은 AMP>DEA>MEA, 흡수속도는 MEA>AMP>DEA. 순으로 나타났다. 따라서 가장 우수한 성능을 가진 흡수제를 선정하기 위해서는 흡수용량과 흡수속도를 동시에 고려해보아야 한다.