• 제목/요약/키워드: Absorbent)

검색결과 490건 처리시간 0.023초

고압에서 알킬카보네이트와 트리아세틴의 이산화탄소 용해도 측정 (Solubility Measurement of Carbon Dioxide in Alkylcarbonates and Triacetin at High Pressure)

  • 김지원;홍원희;홍연기
    • 청정기술
    • /
    • 제21권2호
    • /
    • pp.124-129
    • /
    • 2015
  • 본 연구에서는 5~30 bar의 이산화탄소에 대한 DMPEG250 (dimethyl ether of polyethylene glycol), DEC (diethyl carbonate), DMC (dimethyl carbonate), 그리고 TAT (triacetin)의 용해도를 측정하기 위해 일정 부피법에 따른 용해도 측정 장치를 사용하였다. 이들에 대한 이산화탄소 용해도는 측정된 부피와 압력을 Peng-Robinson 방정식에 대입하여 얻은 이산화탄소의 몰수로부터 얻어졌다. 이산화탄소에 대한 물리 흡수제의 용해도는 같은 온도에 대해 DMPEG250 > TAT > DEC > DMC 순으로 나타났다. DMPEG250에 DEC를 혼합한 물리 흡수제를 사용할 경우 이산화탄소에 대한 용해도는 DMPEG250 단독에 의한 경우보다 높은 값을 가지는 것으로 확인되었다. 그러므로 DEC가 혼합된 DMPEG250/DEC 혼합 물리 흡수제는 기존의 DMPEG250이 가지는 높은 비용을 절감할 수 있을 뿐 아니라 용해도 향상까지 거둘 수 있어 향후 연소 후 이산화탄소 포집 공정에 효과적인 적용을 기대할 수 있다.

PVDF 중공사막 제조 및 벤치규모 기-액 접촉기를 이용한 SO2 흡수특성 (Preparation of PVDF Hollow Fiber Membrane and Absorption of SO2 from Flue Gas Using Bench Scale Gas-Liquid Contactor)

  • 박현희;조항대;김인원;이형근
    • Korean Chemical Engineering Research
    • /
    • 제46권3호
    • /
    • pp.521-528
    • /
    • 2008
  • 중공사막 접촉기에 적절한 PVDF 중공사막을 상전이 공정에 의하여 제조하였으며, SEM 과 기체투과도에 의하여 그 특성을 분석하였다. 벤치규모 중공사막 접촉기에서 $SO_2$ 제거를 위한 흡수제는 수산화나트륨 수용액을 사용하였다. 기체는 shell side, 액체는 lumen side로 흐르는 counter-current로 실험하였으며, 흡수제의 농도, 기체의 유속, 액가스비, 유입 $SO_2$ 농도에 따른 영향을 알아보았으며, 수학적 모델링에 의해 막 물질전달계수($k_m$)를 측정하였다. 흡수제의 농도와 액기비가 증가함에 따라 기-액 계면에서 충분한 알칼리도가 제공되므로, 액체막 저항이 감소하며, 총괄물질전달 용량계수는 증가하였다. 기체유속이 증가함에 따라 기체막저항은 감소하게 되므로 총괄물질전달 용량계수는 증가하였다.

폴리아크릴아마이드를 기반으로 하는 다기능성 토양안정제의 특성에 관한 연구 (Research on Characteristics of Multifunctional Soil Binder Based on Polyacrylamide)

  • 김진경;김대호;주상현;이명천
    • 공업화학
    • /
    • 제29권2호
    • /
    • pp.155-161
    • /
    • 2018
  • 훼손된 비탈면을 효율적으로 복구하고 토양을 견고하게 지지하고 식물 생장을 도울 수 있는 토양바인더 사용이 매우 중요하다고 할 수 있다. 이러한 토양바인더는 토양을 오염시키지 않는 친환경 소재이면서 토양의 생태를 복원할 수 있어야 한다. 본 연구에서는 토양바인더 외에 흡수제와 응집제를 첨가하여, 최적의 함수율, 투수계수, 직접전단강도 값을 갖는 조건을 도출하였다. 토양바인더로는 다양한 음이온강도의 polyacrylamide (PAM)를, 흡수제로는 super absorbent polymer (SAP), 응집제로는 cellulose ether (CE)를 사용하여 그 효과를 관찰하였다. 그 결과 우선 토양바인더를 사용한 경우 토양시험편의 직접전단강도와 함수율을 각각 수십 배 이상 그리고 두 배 이상 증가시킬 수 있었으며 변수위 투수계수를 낮춤으로 인해 방수의 효과가 증가함을 관찰되었다. 첨가제로서 SAP를 사용한 경우 그 효과를 더욱 높일 수 있었고 SAP의 응집력을 높이기 위해 첨가된 CE 역시 직접전단강도와 함수율을 높임을 관찰할 수 있었다.

식용버섯 재배시 초고흡수성 폴리머의 효과 (Application of Super Water Absorbent for Edible Mushroom Production)

  • 김명곤;윤숙;문성필;김형무;장태복;홍재식
    • 한국균학회지
    • /
    • 제28권1호
    • /
    • pp.16-21
    • /
    • 2000
  • 식용버섯 인공재배시 수분조정제로 아크릴아미드와 아릴설폰산염의 공중합물의 가수분해물인 CPAM-AS-hyd-1의 흡수겔을 첨가하여 각종 식용버섯의 균사생장 및 자실체 수량에 영향을 살펴본 결과 배지 100cc에 200g까지의 첨가는 균사생장에 큰 영향을 미치지 많았다. 식용버섯 생산을 위한 흡수겔의 적정 농도는 배지 100 cc에 대하여 느타리버섯의 경우는 200 g, 노루궁뎅이버섯은 $200{\sim}250\;g$, 팽이버섯은 200 g 첨가시 양호하였으며, 팽이버섯 재배시 폴리머 흡수겔과 10%(v/v)의 평화왕겨 첨가가 수량증대에 효과적이었다.

  • PDF

발전소 비산재를 결합재로 활용한 로내탈황용 석회 흡수제의 탈황효율 (Desulfurization Efficiency of Lime Absorbent in In-Furnace Desulfurization as Fly Ash Binder in Power Plant)

  • 서준형;백철승;조진상;안지환;윤도영;조계홍
    • 자원리싸이클링
    • /
    • 제27권3호
    • /
    • pp.58-65
    • /
    • 2018
  • 국내 순환유동층보일러형 발전소에서 발생하는 석탄재의 재활용을 위해 석회석 미분말과 CFBC 비산재를 이용하여 0.2~0.4 mm 크기를 가지는 석회계 흡수제를 제조하였다. 석회계 흡수제에 소석회를 소량 혼합한 결과 칼슘실리케이트 성분이 입자 표면에 형성되어 강도가 향상되었으며, 탈황특성을 비교한 결과 상업적으로 사용되고 있는 로내탈황용 석회석보다 약 10% 정도 높은 전환율을 가진 것으로 나타나 탈황 흡수제로 활용 가능함을 확인하였다.

흡습유연 처리에 의한 PET 소재의 성능 변화 분석 (The Effects of Water-Absorbent Softner Treatment on the End-Use Properties of Polyester Knitted Fabrics)

  • 권영아
    • 한국의류산업학회지
    • /
    • 제12권5호
    • /
    • pp.676-682
    • /
    • 2010
  • Superior hydrophilic properties will allow varieties of polyester(PET) fiber materials, fabrics and industrial materials a broader scope of use. The purpose of this study was to investigate the effect of water-absorbent softener treatment on the end-use properties and the hand of polyester knitted fabrics. Two different fabrics were knitted for the summer ladies' outwear; PET jersey and PET mesh. Variables were softner treatment and stitch type(jersey and mesh). Mechanical properties of the fabric samples were measured by KES-FB system. From these, primary hand values(HV) were evaluated by the conversion equation (KW-403-KTU) and the total hand value(T.H.V.) was calculated according to the KN-304 Summer. Both water-absorbent softner treatment and stitch types affected mechanical properties and hand values of PET fabrics. Mesh were thicker than single jersey stitch. As they became thicker, tensile, shear, and compressional energy increased. It appeared that coefficient of friction of mesh stitch was larger than that of single jersey stitch. The coefficient of friction and the mean deviation of surface roughness were decreased by softener treatment. After softner treatment KOSHI and SHARI of the both PET jersey and PET mesh decreased. However, FUKURAMI values of PET jersey increased and that of PET mesh decreased. The T.H.V. of the treated PET jersey was lower than that of the untreated one, while the T.H.V. of the treated PET mesh was higher than that of the untreated one. Overall T.H.V. of the single jersey was better than that of the mesh before and after softner treatment.

고흡수성고분자가 조핵제로 첨가된 빙축열용 축열재 개발 (An Evaluation of a super-absorbent polymer as the Nucleating Agent for a Capsule-type Ice Storage System)

  • 최형준;홍성안;박원훈
    • 태양에너지
    • /
    • 제10권2호
    • /
    • pp.28-37
    • /
    • 1990
  • 빙축열의 문제점인 물의 과냉각을 억제 또는 제거하기 위하여 고흡수성 고분자를 조핵제로 사용하는 방법이 고안되었다. 축열재인 물을 $25^{\circ}C$에서 $-12^{\circ}C$로 냉각시킨 결과 순수한 물의 경우 샘플중 25%의 샘플은 전혀 결빙되지 않았으며 나머지 얼음이 생성된 샘플의 경우도 평균 $9.8^{\circ}C$의 과냉각을 보인 반면, 조핵제가 첨가된 경우 35%가 전혀 과냉각을 보이지 않았으며 과냉각이 일어난 샘플의 평균과 냉각온도 역시 현저히 감소되었다. 0.5wt%의 고흡수성 고분자가 첨가된 축열재를 사용하여 캡슐타입으로 제작한 축열조에서 열전달 실험을 실시한 결과 과냉각은 전혀 관찰되지 않았으며 이로 인하여 순수물을 축열재로 사용하는 경우보다 축열속도가 증가하였다. 이상의 결과로부터 고흡수성 고분자가 빙축열 시스템의 조핵제로 사용될 수 있음을 확인하였다.

  • PDF

연소 후 CO2 포집을 위한 흡수제의 재생반응에 의한 성능 해석 (Performance Analysis of Absorbent for Post-combustion CO2 Capture by Regeneration)

  • 길태형;이동호;조성호;이창근;박영성;류호정
    • 한국수소및신에너지학회논문집
    • /
    • 제27권1호
    • /
    • pp.83-94
    • /
    • 2016
  • Performance of absorbent for post-combustion $CO_2$ capture was measured and discussed. Fully saturated fresh absorbent (P2-15F) and absorbents sampled from absorption and regeneration reactor of continuous $CO_2$ capture process, P2-15A, P2-15R, respectively, were used as representative absorbents. Small scale fluidized bed reactor (0.05 m I.D., 0.8 m high) which can measure exhaust gas concentration and weight change simultaneously was used to analyze regeneration characteristics for those absorbents. Exhausted moles of $CO_2$ and $H_2O$ were measured with increasing temperature. $H_2O/CO$ ratio and working capacity were determined and discussed to confirm reason of reactivity decay after continuous operation. Moreover, possibility of side reaction was checked based on the $H_2O/CO_2$ mole ratio. Finally, suitable regeneration temperature range was confirmed based on the trend of working capacity with temperature.

Responses of Low-Quality Soil Microbial Community Structure and Activities to Application of a Mixed Material of Humic Acid, Biochar, and Super Absorbent Polymer

  • Li, Fangze;Men, Shuhui;Zhang, Shiwei;Huang, Juan;Puyang, Xuehua;Wu, Zhenqing;Huang, Zhanbin
    • Journal of Microbiology and Biotechnology
    • /
    • 제30권9호
    • /
    • pp.1310-1320
    • /
    • 2020
  • Low-quality soil for land reuse is a crucial problem in vegetation quality and especially to waste disposal sites in mining areas. It is necessary to find suitable materials to improve the soil quality and especially to increase soil microbial diversity and activity. In this study, pot experiments were conducted to investigate the effect of a mixed material of humic acid, super absorbent polymer and biochar on low-quality soil indexes and the microbial community response. The indexes included soil physicochemical properties and the corresponding plant growth. The results showed that the mixed material could improve chemical properties and physical structure of soil by increasing the bulk density, porosity, macro aggregate, and promote the mineralization of nutrient elements in soil. The best performance was achieved by adding 3 g·kg-1 super absorbent polymer, 3 g·kg-1 humic acid, and 10 g·kg-1 biochar to soil with plant total nitrogen, dry weight and height increased by 85.18%, 266.41% and 74.06%, respectively. Physicochemical properties caused changes in soil microbial diversity. Acidobacteria, Bacteroidetes, Chloroflexi, Cyanobacteria, Firmicutes, Nitrospirae, Planctomycetes, and Proteobacteria were significantly positively correlated with most of the physical, chemical and plant indicators. Actinobacteria and Armatimonadetes were significantly negatively correlated with most measurement factors. Therefore, this study can contribute to improving the understanding of low-quality soil and how it affects soil microbial functions and sustainability.

하수슬러지의 수증기 활성화법을 이용한 흡착제 제조와 흡착특성 (Preparation of Adsorbent from Sewage Sludge by Steam Activation and Adsorption Characteristic)

  • 정동현;전영남
    • 대한환경공학회지
    • /
    • 제29권5호
    • /
    • pp.515-520
    • /
    • 2007
  • 현재 슬러지의 처리는 주로 해양투기에 의해 진행되는데 런던협약에 의해 슬러지 내 중금속 함량에 따라 점진적으로 해양투기가 완전 금지되어진다. 이에 하수슬러지의 안정적 처리 방안이 시급히 검토되어야 한다. 그 대책으로 최근 슬러지의 능률적이고 친환경적인 처리를 위한 방법 중 하나로 활성화를 통한 흡착제 제조가 부각되고 있다. 본 연구는 하수슬러지를 수증기 활성화법을 이용하여 흡착제로 활용하기 위한 기초연구로서 양질의 흡착제를 제조하기 위한 변수별 연구를 통한 최적 활성화조건을 연구하였다. 그 결과 요오드 흡착능을 기준으로 하여 변수별 연구를 통해 수증기 주입량 30 mL/hr, 활성화 온도 $500^{\circ}C$, 활성화 시간 60분으로 선정되었다. 이 때 요오드 흡착능과 수율은 228.4 mg/g, 77.23%로 나타났다. 또한 질소 흡착, SEM, EDS를 이용하여 수증기 활성화에 따른 세공 발달, 비표면적, 평균 세공경 및 화학적 성상과 함량을 파악하였다. 수증기 활성화를 통해 발달되는 세공은 주로 미세 세공임을 확인하였다.