• Journal of the Korean Society of Clothing and Textiles
• /
• v.22 no.6
• /
• pp.699-705
• /
• 1998

This paper surveys the effect of rice straw ash solution to the physical properties of Sappan Wood dyeing fabrics. In the quantitative analysis of rice straw ash solution, the quantities of absorbed ingredients in fabrics were increased by bath pull treatment but the amount of absorption(K/S value) was increased by bath pH4.5 treatment. This is related to the metal ion. Among the metal ion, effect of Fe iou and Al ion were related. In case added extracted dye solution to mordants, the color dye solution became dark and increased reddish. The changes of mechanical properties of fabrics tensile resilience, bending rigidity(B), compressional resilience(RC) were increased. Generally mechanical properties were increased by rice straw ash solution treatment, specially bath pH9 treatment. Rice straw ash solution treatment of dyeing fabrics made the improvement in tensile strength and elongation and in the amount of absorption, dye ability, color fastness, mechanical properties, tensile strength, elongation.

• Journal of Environmental Science International
• /
• v.21 no.8
• /
• pp.901-907
• /
• 2012

The objective of this study was to evaluate bacteria removal ability of the metallic silver which was baked silver ion impregnated ceramic filter at heating condition. Silver leaking from baked ceramic filter was tested to sustain bacteria removal for a long time. Silver impregnated ceramic filter could remove E. coli completely at $10^{12}$ MPN/100ml to $10^{13}$ MPN/100ml of influent. However, ceramic filter without silver did not remove E. coli completely under the same condition. After baking, the silver impregnated ceramic filter almost didn't leak out the silver ion from filter. Photo of TEM (Transmission Electron Microscopy) showed that absorbed silver ions remained in ceramic filter after baking process and most of silver were less than 10 nm. According to the increase in the amount of silver in the ceramic filter, removal efficiencies of E. coli were increased but turbidity removal was decreased. It can be accounted that increased removal efficiency of E. coli was from disinfection of silver that is in the ceramic filter. Simulated concentrations of bacteria agree well with the observed experimental effluent concentration data. Moreover, first-order decay coefficients increased to 0.0034/min after silver was added in the ceramic filter. Increase of first-order decay coefficient proves that silver-added ceramic filter can remove bacteria easily.

• Asian-Australasian Journal of Animal Sciences
• /
• v.11 no.5
• /
• pp.620-633
• /
• 1998

Methods developed for measuring digestibility and availability of amino acids in feedstuffs used in pig nutrition are reviewed. Digestibility is a proportion of an amino acid in a feed that is absorbed from the digestive tract and should be determined from the difference between the amount of amino acid consumed and passing the distal ileum. Techniques for ileal digesta sampling including various types of cannulas: a re-entrant, T-piece, IPV, IPVC and ileaorectal anastomosis are described and comparisons amongst these methods are presented. Other methodologies like mobile bag technique, in vitro assays and mathematical prediction method are also described. Significance and methodologies for measurement of endogenous nitrogen and amino acids losses at the distal ileum and their effect on the apparent and true nitrogen and amino acid digestibilities in feeds are discussed. Factors influencing the apparent and true amino acid digestibilities such as dry matter intake, protein, fibre and antinutritive compounds content in the diet are discussed. Amino acid bioavailability -the proportion of the total amino acid digested and absorbed in a form utilized in metabolism - measured by the growth assay may differ from its ileal digestibility. Chemical methods for determination of available lysine content in heat treated feeds are evaluated.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2001.10a
• /
• pp.292-300
• /
• 2001

The paper describes spectroscopic characteristics of plasma induces in the pulsed YAG laser welding of alloys containing a large amount of volatile elements. The authors have conducted the spectroscopic analyses of laser induced Al-Mg alloys plasma in the air and argon atmosphere. In the air environment, the identified spectra were atomic lines of Al, Mg, Cr, Mn, Cu, Fe and Zn, and singly ionized Mg lines, as well as the intense molecular spectra of A10 and Mg0 formed by chemical reactions of evaporated Al and Mg atoms from the pool surface with oxygen in the air. In argon atmosphere, Mg0 and AI0 spectra vanished, but AIH spectrum was detected. The hydrogen source was presumably hydrogen dissolved in the base metals, water absorbed on the surface oxide layer, or $H_2$ and $H_2O$ in the shielding gas. The resonant 1ines of Al and Mg were strongly self-absorbed, in particular, self-absorption of the Mg 1ine was predominant. These results show that the laser induced plasma was made of metal1ic vapor with relatively low temperature and high density.

• Journal of the Korean Society of Costume
• /
• v.36
• /
• pp.109-119
• /
• 1998

For the purpose of standardization and practicability of natural dyeing, the mordanting and dyeing properties of Caseaslpinia Sappan, L. and Brazilin were studied. Appropriate extraction, dyeing and mordanting condition of Caeaslpinia Sappan, L. were determined, and the effect of mordanting method on dye up-take adn color fastness of dyed fabric was investigated. The most absorbance of Caeaslpinia Sappan, L. solution was 445nm, Brazilin was 448nm. The color of bazilin solution was affected by pH 7~9. The optimum temperature to extract Caesalpinia Sappan, L. was 10$0^{\circ}C$ adn dyeing solution for 1 hour. In case mordants concentration, the most absorbance was 0.3%. In case mordanting test, the best and proper temperature to quantities of absorbed mordants in silk was 8$0^{\circ}C$ and the most quantities of absorbed mordants in silk was mordant treatment by Cu. Effective dyeing time to silk was 60min. Effective mordanting temperature was 8$0^{\circ}C$, and its time was 30min. K/S value of dyeing fabrics was recoginazed by mordanting treat-ment, specially Fe, Sn, Al, Cu. K/S value of pre-mordanting was higher than post-mordanting. After soaping treatment K/S value of pre- and post-mordanting silk was decreased and 0.1%(W/V) quantity of mordant was sufficient for treatment. In the case of Caeaslpinia Sappan, L. fastness was increased by mordanting treatment. Mordants and mordanting treatment method affected the amount of absorption and color change of dyed silk.

• Journal of Advanced Marine Engineering and Technology
• /
• v.23 no.3
• /
• pp.360-368
• /
• 1999

The paper describes spectroscopic characteristics of plasma induced in the pulsed YAG laser welding of alloys containing a large amount of volatile elements. The authors have conducted the spectroscopic analyses of laser induced Al-Mg alloys plasma in the air and argon atmosphere. In the air environment the identified spectra were atomic lines of Al, Mg, Cr, Mn, Cu, Fe and Zn and singly ionized Mg lines as well as the intense molecular spectra of ALO and MgO formed by chemi-cal reactions of evaporated Al and Mg atoms from the pool surface with oxygen in the air. In argon atmosphere MgO and AlO spectra vanished but AlH spectrum was detected. the hydrogen source was presumable hydrogen dissolved in the base metals water absorbed on the surface oxide layer or $H_2$ and $H_2O$ in the shielding gas. The resonant lines of Al and Mg were strongly self-absorbed in particular self-absorption of the Mg line was predominant. These results show that the laser induced plasma was made of metallic vapor with relatively low temperature and high density.

• Textile Coloration and Finishing
• /
• v.13 no.1
• /
• pp.38-44
• /
• 2001

The adsorption ability of dyes on chitin, a natural polymer was investigated for decolorization of dye wastewater. Chitin was manufactured in lab by decalcification in dilute aqueous hydrochloric acid solution and deproteination in dilute aqueous sodium hydroxide solution with shrimp shells. Absorbance of residue solution of dyebaths after dye adsorptions of chtin were measured in varieties of dye concentration and dipping periods. Three kinds of Direct dyes -C.I. Direct Red 81 (red 81), C.I. Direct Brown l(brown 1) and C.I. Direct Green 26(green 26) - were used. Red 81 and brown 1 have smaller molecular weight than green 26. The results from experimentals were of]tamed as follows: 1) Adsorption of green 26 was improved in dyebath by addition of salt, but red 81 and brown 1 were not found any improvements. 2) Smaller size of chitin particles could be absorbed much more speedy. In this experiments, the smallest range of chitin particle size was $250\mu{m}$ and less. 3) The most efficient amount of chitin for 20m1 of dyebath was 0.2g, 4) Both of red 81 and brown 1 showed good and speedy adsorption abilities as dyestuffs of over 90 percent in just one minute in dyebath of 0.01% dye concentration. But green 26 was absorbed slowly because of its large molecular weight. It took 40minutes to absorb dyestuffs of over 90 percent in dyebath of 0.01% dye concentration.

• Journal of Surface Science and Engineering
• /
• v.49 no.4
• /
• pp.389-394
• /
• 2016

The operation method of nuclear power plants is currently changing to high burn-up and long period that can enhance economics and efficiency of the plant. Since nuclear plant operation environment has been becoming severe, the amount of absorbed hydrogen also has increased. Absorbed hydrogen can be fatal securing safety of nuclear fuel cladding in case of Loss of Coolant Accidents(LOCA). In order to examine the impact of hydride on high-temperature oxidation, high-temperature oxidation experiment was performed on normal Zry-4 cladding and on Zry-4 cladding where hydrogen is charged in air pressure steam atmosphere under the $950^{\circ}C$ and $1000^{\circ}C$. According to the results, while oxidation acceleration due to charged hydrogen was not observed prior to breakaway oxidation creation, oxidation began to accelerate in cladding where hydrogens charged as soon as the breakaway oxidation started. If so much hydrogen are charged in the cladding, equiaxial monoclinic phase to unstable of stress is formed and it is presumed that oxidation is accelerated because nearby stress caused a crack in equiaxial phase, and that makes corrosion resistance decline sharply.

• Nutrition Research and Practice
• /
• v.3 no.1
• /
• pp.9-14
• /
• 2009

Aloe products are one of the top selling health-functional foods in Korea, however the adequate level of intake to achieve desirable effects are not well understood. The objective of this study was to determine the intestinal uptake and metabolism of physiologically active aloe components using in vitro intestinal absorption model. The Caco-2 cell monolayer and the everted gut sac were incubated with $5-50{\mu}M$ of aloin, aloe-emodin, and aloesin. The basolateral appearance of test compounds and their glucuronosyl or sulfated forms were quantified using HPLC. The % absorption of aloin, aloe-emodin, and aloesin was ranged from 5.51% to 6.60%, 6.60% to 11.32%, and 7.61% to 13.64%, respectively. Up to 18.15%, 18.18%, and 38.86% of aloin, aloe-emodin, and aloesin, respectively, was absorbed as glucuronidated or sulfated form. These results suggest that a significant amount is transformed during absorption. The absorption rate of test compounds except aloesin was similar in two models; more aloesin was absorbed in the everted gut sac than in the Caco-2 monolayer. These results provide information to establish adequate intake level of aloe supplements to maintain effective plasma level.

• Journal of Radiation Industry
• /
• v.5 no.1
• /
• pp.69-73
• /
• 2011

Polyamide 66 (PA66) nanofibers with Triallyl cyanurate (TAC) were obtained by electrospinning of formic acid and chloroform solution. Electron beam irradiation of PA66 nanofiber with and without TAC was carried out over a range of absorbed doses (20~100 kGy) in nitrogen. The characterization of the irradiated PA66 nanofibers and PA66 nanofibers with TAC was done by scanning electron microscopy (SEM), nuclear magnetic resonance (NMR), thermogravimetric analysis (TGA) and universal testing machine (UTM). The results of the SEM image analysis confirmed that the morphology of PA66 nanofibers was not altered by electron beam. The amount of TAC in PA66 nanofiber with TAC was identified by $^1H-NMR$ analysis. The degradation temperature of PA66 nanofibers with TAC at an absorbed dose of 20~100 kGy was higher than the irradiated PA66 nanofiber without TAC. On the other hand, the decreasing rate of modulus of irradiated PA66 nanofibers with TAC was less than PA66 nanofibers.