• Journal of the Korean Society for Heat Treatment
• /
• v.26 no.3
• /
• pp.120-125
• /
• 2013

In this study, the effect of tempering treatment on the mechanical properties in modified 440A steel has been investigated. The amount of remaining carbide decreased with increasing the austenitizing treatment temperature, and all carbides were completely dissolved at $1250^{\circ}C$. The amount of remaining carbide decreased with increasing the time of austenitizing, but the carbide remained insoluble up to 120 minutes at $1050^{\circ}C$. With increasing the tempering temperature, tensile strength decreased, and elongation increased slowly, while hardness rapidly decreased, and impact value unchanged and then rapidly increased over $500^{\circ}C$. The strength and hardness slowly decreased, while the elongation and impact absorbed energy increased with increasing the tempering time. $Cr_{23}C_6$ type carbide was precipitated and sharp decrease of elongation and toughness by tempering did not appear.

• Journal of the Korean Chemical Society
• /
• v.39 no.1
• /
• pp.76-80
• /
• 1995

Polydimethylsiloxane(PDMS)-co-poly(2-hydroxyethyl methacrylate)(PHEMA) was prepared and the degree of swelling of solvents into the polymers was examined. It was confirmed that the solubility parameter of PHEMA homopolymer is 26 (J/cm3)1/2. Ethanol was significantly absorbed into copolymers containing large amount of PHEMA, while tetrahydrofuran was effectively absorbed into copolymers containing large amount of PDMS. Absorption of polar solvents into the copolymers were increased with the increase of PDMS content. The model drug, crystal violet (CV), was more absorbable into PDMS-HPEMA copolymers than PHEMA homopolymer. Absorption of CV was decreased with the increase of PDMS content of the copolymers.

• Journal of the Korean Electrochemical Society
• /
• v.1 no.1
• /
• pp.55-59
• /
• 1998

The water absorption in protective coatings, which may greatly influence the durability of these coatings, was studied using quartz crystal microbalance and electrochemical impedance technique. The water absorption in protective coatings and the change of coating capacitance with concentration of electrolyte were measured. The water absorption in coatings seems to be driven by osmotic pressure, and larger amount of water was absorbed in thinner coatings at initial stage of absorption. The amount of water absorbed in coatings changed with the type and crosslinking density of resin used in coating formulation. When water absorption and desorption of coating occured by exposing the coatings to electrolyte solutions of different concentration, increase in impedance caused by desorption of water was found to be higher in the case of thinner film.

• Korean Journal of Plant Resources
• /
• v.27 no.6
• /
• pp.635-641
• /
• 2014

Scutellaria baicalensis $G_{EORGI}$ (Scutellariae Radix) has been used to clear heat and to dry dampness in the stomach or intestines, which manifests as diarrhea or dysenteric disorder. In this study, we investigated the effective preparation of active components in Scutellariae Radix using the methods of solvent extraction and absorption fractionation for the development of new functional food or pharmaceuticals. The marker substances, baicalin, baicalein, wogonoside, and wogonin were directly isolated from the Scutellariae Radix. There chemical structures were elucidated by spectroscopic analysis. The Scutellariae Radix was extracted with hot water. To enhance yield of flavonoids in Scutellariae Radix, the hot water extract was dissolved in ethanol with concentration dependent manner. The precipitates were separated using centrifugal techniques at 10,000 rpm. Supernatant liquid was applied to the HPLC for quantification of major compounds. Separately, the hot water extract was absorbed on Diaion HP-20 resin. And then, the absorbed fraction was eluted with methanol for HPLC. The contents of baicalin, baicalein, wogonoside and wogonin in different treatment methods were analyzed by HPLC. Total amount of four major components were 16.9% in 50% ethanol extract, 21.7% in 70% ethanol extract, 20.5% in 90% ethanol extract, and 39.3% in absorbed fraction of Diaion HP-20 resin. In these results, we found that resin absorption method is suitable for the extraction of enriched flavonoids from Scutellariae Radix.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.11 no.2
• /
• pp.40-47
• /
• 2003

This paper presents a new evaporative system monitoring method using a virtual HC sensor for an automotive on-board diagnosis. A development was made at providing mathematical expressions from the lambda control information to estimate the HC mass flow purged into the intake manifold from the canister for implementing a virtual HC sensor. The change of the lambda averagevalue reflected the influence of the additional fuel from purging results the sensor estimation of the purged HC amount. Based on this virtual HC sensor, a new evaporative system monitoring method was proposed comparing the amount of purged HC amount with the amount of the HC gas evaporated from the fuel tank and absorbed into the canister. Finally, the method was validated with a simulation using the data logged from the retail car.

• Textile Coloration and Finishing
• /
• v.20 no.5
• /
• pp.35-40
• /
• 2008

Dyeing and washing fastness properties of polyurethane-impregnated polyester (PU-impregnated PET), and the distribution of two disperse dyes between PET and PU film were studied to investigate the effect of PU portion to exhaustion and washing fastness. Dyeing properties of PU-impregnated PET were quite different with those of PET: PU-impregnated PET absorbed disperse dye linearly from the early stage of dyeing to equilibrium, and it exhibited excellent build-up property up to 4 %owf dyeing. The absorbed dye on PU film at early dyeing stage migrated to more substantive PET at the temperature higher than $115^{\circ}C$. The amount of exhausted dye on PET portion was larger than on PU film and the distribution ratio was $2.08{\sim}2.34$. The grade of washing fastness of PU-impregnated PET was the same as or lower by $0.5{\sim}1$ grade than PU film whose washing fastness was lower by $0.5{\sim}1$ than PET.

• Journal of Power System Engineering
• /
• v.18 no.5
• /
• pp.55-59
• /
• 2014

This study performed experimental research to visualize the moisture content absorbed in R-22, refrigerant of refrigerator. Sulfuric acids were mixed with bromothylmol blue solution to make indicating solutions, and humidity papers were prepared by impregnation of the indicating solutions into solid supporters. Prior to the impregnation, small amount of lithium chloride was added into indicating solution. Moisture measuring cell was composed to test sensitivity of the humidity papers. Color changing characteristics of the humidity papers were also examined at various moisture contents in R-22. Color of the humidity paper varied linearly with the moisture content in R-22 in the range from 150 ppm to 300 ppm. The humidity papers showed complete color change to yellow at the moisture content of 300 ppm within 8 hours.

• Textile Coloration and Finishing
• /
• v.16 no.1
• /
• pp.26-33
• /
• 2004

Two reactive disperse dyes having $\alpha$-bromoacrylamide or acrylamide group were synthesized and their dyeing properties were compared with a disperse dye. Dyeing properties of reactive disperse dyes were strongly influenced by the chemical structure of reactive group. The amount of absorbed reactive disperse dye containing $\alpha$-bromoacrylamide group on polyester fiber was less than the disperse dye, and that on nylon fiber was much higher. When polyester and nylon fiber were simultaneously dyed in a dye pot, nylon fiber absorbed the reactive disperse dye more than polyester fiber. The reactive disperse dye having acrylamide group could reduces difference in color depth to a large extent, but the application of carrier or variation of dyebath pH were not sufficient for giving the same color depth to both fibers. The N/P union fabric could be dyed with the reactive disperse dye and its wash fastness were good to excellent.

• Corrosion Science and Technology
• /
• v.4 no.1
• /
• pp.15-18
• /
• 2005

Hydroxyapatite(HAp) was synthesized using the waste sludge from semiconductor process and used as an anticorrosive pigment. The water absorption of coating pigmented with anticorrosive pigment and the corrosion at interface between coating and substrate were monitored using AC impedance techniques. The anticorrosive performance of HAp was compared with those of red lead(RL) and zinc potassium chromate(ZPC), which have been known as representative anticorrosive pigments. The amount of absorbed water in ZPC- and HAp- pigmented coatings was much higher compared to that in RL-pigmented and unpigmented film. However, it seems that the water absorbed into HAp- or ZPC-pigmented film is beneficial to anticorrosive function. The anticorrosive performance of HAp is superior or at least comparable to those of ZPC and RL. The excellent anticorrosive properties of HAp can be explained by its passivating ability, caused by the reaction of the soluble component of HAp with Fe to form iron phosphate in the presence of water.

• Journal of Plant Biology
• /
• v.20 no.3
• /
• pp.109-118
• /
• 1977

Seasonal distribution of N, P and K contents and their cycling were studied in Korean oak (Quercus acutissima) and Korean alder (Alnus sibirica) stands in central part of Korean peninsula. The amounts of three minerals were high in young leaves but gradually decreased with the process of leaf development in both stands. The amounts of minerals in the branches, trunks and roots were decreased in summer, however, they increased again in autumn. Seansonal changes of these minerals were not significant in the two stands. The amounts of phosphorus and potassium in plant and soil were higher in the oak stand than the alder one, but those of nitrogen were reversed. The amounts of minerals absorbed during one year were greater in the oak stand than in the alder one, but those returned into soil through mineralization of litter were less in the former than in the latter. The nutrient requirements of the oak stand were greater than the alders, but the cycling rate, the ratio of the amount of minerals absorbed to returned, was opposite.