• Title/Summary/Keyword: Abrasives

Search Result 192, Processing Time 0.03 seconds

Synthesis of Ceria Nanosphere by Ultrasonic Spray Pyrolysis

  • Kim, Jong-Young;Kim, Ung-Soo;Cho, Woo-Seok
    • Journal of the Korean Ceramic Society
    • /
    • v.46 no.3
    • /
    • pp.249-252
    • /
    • 2009
  • Nanocrystalline ceria particles were prepared by using the ultrasonic spray pyrolysis method. The prepared ceria particles were found to be spherical and non-agglomerated by the SEM and TEM analyses. It was found that carrier gas influences the size and morphology. It was found that the air stream of carrier gas results in porous agglomerated structure of ceria abrasives, whereas solid nano-sphere can be obtained in a more oxidizing atmosphere.

The Grinding Characteristics of 5 kind metals for CBN Wheel (CBN휠에 의한 5종 재료의 연삭 특성 비교)

  • 원종호;김건희;안병민;박순섭;이진오
    • Proceedings of the Korean Society of Precision Engineering Conference
    • /
    • 2001.04a
    • /
    • pp.925-929
    • /
    • 2001
  • Ultra-abrasives such as diamond and CBN have used to maintain accuracy and form deviation for superalloy etc. This study contains the dry cylindrical grinding of metals with Vitrified-bond CBN wheel and Resinoid-bond CBN wheel. For various conditions of grinding speed, workpiece speed, grinding depth and feed speed of table, the grinding resistance, the surface roughness, and the material removal are measured and discussed.

  • PDF

A study Grinding Characteristic of CBN Wheel (CBN 휠의 연삭특성에 관한 비교연구)

  • 안병민;원종호;김건희
    • Proceedings of the Korean Society of Machine Tool Engineers Conference
    • /
    • 2001.04a
    • /
    • pp.315-320
    • /
    • 2001
  • Ultra-abrasives such as diamond and CBN have used to maintain accuracy and form deviation for superalloy etc. This study contains the dry cylindrical grinding of metals with Vitrified-bond CBN wheel and Resinoid-bond CBN wheel. For various condition of grinding speed, workpiece speed, grinding depth and feed speed of table, the grinding resistance, the surface roughness, and material removal are measured and discussed.

  • PDF

A study on the restoring method of the abrasives cylinder liner of cast iron using thermal plastic deformation technique (TPD법에 의해 재생된 실린더 라이너의 야금학적 고찰)

  • 이광렬;김종호;김영식
    • Proceedings of the Korean Society of Marine Engineers Conference
    • /
    • 2002.05a
    • /
    • pp.141-146
    • /
    • 2002
  • The cast iron cylinder liner of the marine engine must be scrapped after its inner surface was definitely worn out due to the friction between the surface and piston ring during the operating. In this research, the restoring method of the worn out cast iron cylinder liner are discussed based on the results of experimental work of the thermal plastic deformation technique.

  • PDF

Effect of Alumina Addition tn the Silica Slurry on the Chemical Mechanical Polishing of Laugasite (실리카 슬러리에 첨가된 알루미나가 Langasite의 기계.화학적 연마에 미치는 영향)

  • 장영일;윤인호;임대순
    • Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
    • /
    • 1999.11a
    • /
    • pp.263-268
    • /
    • 1999
  • Langasite, a new piezoelectric material was polished by CMP(chemical mechanical polishing). To enhance the polishing rate, alumina abrasives were added to commercial ILD1300 slurry which contains silica abrasive. The effect of added alumina 0 the silica slurry on the polishing rate and damage of langasite was investigated, Experimental results show that the polishing rate and roughness increases with increasing added alumina particle size, Crystallinity of the langasite is also lowered by alumina addition.

  • PDF

A Study on the Sawing for Cubic Zirconia (큐빅 질코니아의 절단가공에 관한 연구)

  • Seo, Young-il;Choi, Hwan;Lee, Jong-chan;Cheong, Seon-hwan
    • Journal of the Korean Society for Precision Engineering
    • /
    • v.13 no.6
    • /
    • pp.145-151
    • /
    • 1996
  • In sawing operation of cubic zirconia, the performance of diamond cutter blade is very dependent on the blade variables. This investigation presents experimental results which show the effects of the blade variables such as concentration, grain size of diamond, types of diamond abrasives, and bond materials on the behavior of the blades. Based on the experimental results an optimum blade condition for the sawing of cubic zirconia was recommended.

  • PDF

Development of Flexible Tool for Curved Surface Finishing (곡면 다듬질용 유연공구 개발)

  • 조성산;유용균;이승영
    • Journal of the Korean Society for Precision Engineering
    • /
    • v.17 no.7
    • /
    • pp.141-146
    • /
    • 2000
  • A flexible tool is developed for automatic finishing of curved surfaces without any complicated control technique on three-axes machining center. The tool is made of thermosetting polyurethane elastomer on the surface of which aluminum oxide abrasives are mounted. Performance and durability of the tool are examined by finishing ball-end milled surfaces of high-alloyed tool steel. It is demonstrated that the tool removes cusp successfully without changing overall surface shape in relatively short time.

  • PDF

A Study on the Cutting-off Technology for Synthetic Jewelry (인조보석 절단기술에 관한 연구)

  • Seo, Young-Il;Choi, Hwan;Lee, Jong-Chan;Lee, Jae-Geon
    • Proceedings of the Korean Society of Precision Engineering Conference
    • /
    • 1995.04b
    • /
    • pp.23-27
    • /
    • 1995
  • In sawing operation of synthetic jewelry, the performance of diamond cutter blade is very dependent on the blade variables. This investigation presents ecperimental results which show the effects of the blade variables such as types of diamond abrasives, grain size of diamond, concentration, and bond materials on the beavior of te blades. Based on the experimental results an optimum blade condition for the sawing of cubic zirconia was recommended.

  • PDF

Powder Metallurgy Diamond Tools - A Review of Manufacturing Routes

  • Konstanty, Janusz
    • Proceedings of the Korean Powder Metallurgy Institute Conference
    • /
    • 2006.09b
    • /
    • pp.871-872
    • /
    • 2006
  • Nowadays the market for diamond tools grows rapidly. The present decline in the price of industrial diamond makes it a commoditised product capable of competing with conventional abrasives. In terms of production volume, the largest group of diamond tools comprises the metal-bonded diamond impregnated tools, such as sawblades, wire saws, and core drills for cutting stone and construction materials, and core bits for mining applications. This article provides a compendious coverage of the powder metallurgy (PM) diamond tool-making routes, and identifies the recent trends towards changing the tool design and composition to render it cheaper and more efficient.

  • PDF