• Journal of Powder Materials
• /
• v.10 no.4
• /
• pp.249-254
• /
• 2003

WC-6wt%Co hard metal powders were sintered by a 2.45 GHz multimode microwave applicator in Ar atmosphere. Microwave sintering of WC-6wt%Co powder lowered the sintering temperature and shortened the processing time in less than two hours than by a conventional method. Microstructures of the sintered specimen were studied with scanning electron microscope (SEM) and no abnormal grain growth was observed. Mechanical properties were similar to the values of the specimens sintered by a conventional method. Specimen sintered at 135$0^{\circ}C$ for 30 minutes ,hewed 99%, 20.5 GPa and 8.1 MPa$\sqrt{m}$ of theoretical density, hardness and fracture strength, respectively.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2006.09a
• /
• pp.650-651
• /
• 2006

This paper presents a study of large grains by transmission electron microscopy in two WC-Co alloys, one W rich and one C rich. In the W rich alloy, some large grains are found in contact with the $\eta$ phase. The C content influences the morphology of large grains: they are flatter in the C rich alloy with smoother interfaces. Whatever the C content, they contain few dislocations compared to matrix grains except often in a small area. Small WC grains are often found inside the large grains. They have likely been engulfed during the growth of the large grains owing to the low boundary energy.

• Applied Microscopy
• /
• v.34 no.1
• /
• pp.61-69
• /
• 2004

The microwave dielectric properties and microstructures of the Complex Perovskite (1-x)$(Li_{1/2}Sm_{1/2})TiO_3-x (Na_{1/2}Sm_{1/2})TiO_3$(LNST) system were investigated using the X-ray diffraction (XRD) and scanning electron microscopy (SEM). LNST had not only the antiphase tilting of oxygen octahedron but also the inphase tilting of oxygen octahedron and the antiparallel shift of cations. Also, when $0.0{\leq}x{\leq}0.4$, LNST had the vacancy ordering of A-sites because of the evaporation of Li ions. From the observation of the microstructure, abnormal grain growth phenomena were observed over the whole range of x. The temperature coefficient of resonant frequency ($T_{cf}$) of the $({Li_{1/2}}^{+1}{Sm_{1/2}}^{+3})TiO_3$(LST) system has a large negative value ($-220ppm/^{\circ}C$) but the $({Na_{1/2}}^{+1}{Sm_{1/2}}^{+3})TiO_3$(NST) system which substituted $Na^{+1}$ has a large positive value ($+173ppm/^{\circ}C$). The dielectric properties of ${\varepsilon}_r=103,\;Q*f_{0}=3,700GHz$ and $T_{cf}=+50ppm/^{\circ}C$ at 4GHz were obtained when x =0.4.

• Journal of the Korean Ceramic Society
• /
• v.34 no.3
• /
• pp.289-295
• /
• 1997

Effect of ceramic processing was investigated on the microstructure and electronic properties of low loss Mn-Zn ferrite. Addition of CaO and SiO2 to calcined powder rather than to raw materials mixtured resulted in finer-grained microstructure. Higher oxygen pressure during sintering caused microstructural inhomogeneity and the increase in power loss and disaccommodation factor. Relatively low power loss was found for sintering up to 130$0^{\circ}C$ from powders calcined at high temperature and milled shortly. It was caused by slow densification rate and normal grain growth up to 130$0^{\circ}C$. Calcination at low temperature and prolonged milling enhanced den-sification, which gave a fine grained microstructure and low powder loss at sintering temperture below 120$0^{\circ}C$. Sintering temperature above 125$0^{\circ}C$, however, showed abnormal grain growth.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.5 no.3
• /
• pp.191-199
• /
• 2003

Optimum transplanting time for extremely early rice cultivation as an after-crop of fruit and vegetables under greenhouse conditions in the southern area was determined. Rice was transplanted on March 10, March 20, March 30, April 10 and April 20 far three years from 1998 to 2000. Meteorological computations for rice production were high for heading between early May and early July, but they were too low for heading between late July and early August. Especially the expected yield predicted with 35,000 spikelets, the average spikelets per $m^2$ for extremely early transplanting. Computation for heading between late July and early August was low by 106 kg/10a compared with that yield at heading during the same period in the field. As the transplanting date in extremely early rice cultivation was earlier) rice growth at early stages was more retarded by low temperature. Rice growth at heading stage recovered with high temperature, showing less difference for the transplanting date. Abnormal tillers occurred by 15.5∼22.2%. The contribution of 1,000 grain weight${\times}$ripened grain ratio to yield of the extremely early rice cultivation in the greenhouse was 50.6%, indicating 16% hi일or than the degree of panicle per $m^2$ on yield. The estimated optimum transplanting time on the basis of yield for the extremely early greenhouse rice cultivation ranged from March 19 to April 28, and the estimated critical transplanting date on the basis of accumulated effective temperature was March 12. Rice reduced the amount of NO$_3$-N by 97.1% and EC by 90.5% in greenhouse soil with continuous fruit/vegetables fer more than a 10-year period, and completely removed the root-knot nematodes.

• The Korean Journal of Quaternary Research
• /
• v.21 no.2
• /
• pp.69-73
• /
• 2007

Inorganic geochemical and mineralogical analyses from the trench sediments of the Hwayang wetland were carried out to verify the wet/dry conditions during 6000 - 5000 yr BP and abnormal event of 6300 yr BP of Korean west coast. Lithostratigraphy, mineralogy and major element concentrations of the sediments of the trench indicate that during 6000 - 5000 yr BP, a wet/dry conditions might be repeated at an interval of 200 years. Carbonate minerals precipitated with the decrease of water depth in the lake or wetland after about 6000 yr BP. On the other hand, the sediments coarser in mean grain size and larger in standard deviation were corresponded with periods of 6300 yr BP and 6230 yr BP. Especially, such a feature of grain size distribution of 6300 yr BP appears in other wetlands situated in the west coast, e.g., Hwangsan wetland and Cheollipo coastal wetland. During the period, the coarse sediments seem to have been delivered by a high energy like storming.

• Journal of the Korean Ceramic Society
• /
• v.54 no.4
• /
• pp.285-291
• /
• 2017

This study investigated the effects of grain size and phase constitution on the mechanical properties of $3Y-ZrO_2$ by varying the sintering conditions. The raw powder prepared by a low-cost wet milling using the coarse solid oxide powders was sintered by both pressureless sintering and hot-pressing, respectively. As increasing holding time at $1450^{\circ}C$ for pressureless sintering, it promoted the microstructural coarsening of matrix grains and the phase transformation to tetragonal phase, whereas the bimodal microstructure embedded with abnormal $cubic-ZrO_2$ grains was observed regardless of sintering time. On the other hand, the specimens hot-pressed at $1300^{\circ}C$ for 2 h reached ~ 97% of relative density with homogeneous fine microstructure and mixed phase constitution. It was found that the proportion of untransformed monoclinic zirconia had the most adverse effect on the biaxial strength compared to the impacts of grain size and density. The pressureless sintering of the low-cost powder for prolonged sintering time to 8 h led to a decent combination of mechanical properties ($H_V=13.2GPa$, $K_{IC}=8.16MPa{\cdot}m^{1/2}$, ${\sigma}=981MPa$).

• Journal of the Korean Ceramic Society
• /
• v.23 no.3
• /
• pp.1-8
• /
• 1986

The preparation and electrical conductivity of $\beta$-$Al_2O_3$ are investigated as a function of $Na_2O$ content from the-oretical composition of $\beta$-$Al_2O_3$ to that of $\beta$"-$Al_2O_3$. $\beta$-$Al_2O_3$ $\beta$"$Al_2O_3$$\alpha$-Al2O3 and ${\gamma}$-NaAlO2 phases appear in the calcined powder at 125$0^{\circ}C$ for 2 hours. The majoity phase is $\beta$-$Al_2O_3$ in sintered specimens at 155$0^{\circ}C$ and 1$650^{\circ}C$ for 30 mins respectively and ${\gamma}$-4NaAlO_2$ phase also exists when Na2O content is over 10.39w/o ${\gamma}$-4NaAlO_2$ phase does not affect the grain growth of $\beta$-$Al_2O_3$ in sintering at 155$0^{\circ}C$ but acts as a reactive liquid for the abnormal grain growth of $\beta$-$Al_2O_3$in sintering at 1$650^{\circ}C$ The electrical conduction of $\beta$-$Al_2O_3$is predominated by 4Na^+$ ion. Contribution of ionic con-ductivity to total conductivity is gradually decreased with increasing temperature at given oxygen pressure and to -tal conductivity is increased by positive hole due to interstitial oxygen with increasing oxygen pressure.

• Korean Journal Plant Pathology
• /
• v.11 no.1
• /
• pp.94-97
• /
• 1995

In 1994, an abnormal rice growth was observed in a 0.5-ha scale farmer's field located at Chogye-Myeon, Hapcheon-Gun, Gyeongnam Province where rice cv. Hwayeongbyeo was seeded directly in dry paddy field conditions. The major symptoms were less stands per acreage, short leaf length, and hypertrophy of root tip portion. The disorder was identified as rice seeding bight caused by Rhizopus sp. The average plant stand per m2 in the infested field was 108, while it was 375 in the normal field, and leaf growth was retarded to less than one-third of healthy plant. The average leaf lengths of infected and healthy seedlings were 12.8cm and 38.9cm, respectively. When the infected seedlings were transplanted to pots, flooded-soil conditions developed no new root growth but upland conditions allowed 11.2 new roots emerging. The length of newly emerged root in infested soil was 5.3cm in upland and 7.1cm in intermediate flooding conditions. However, it was 10.9cm in non-infested soil with intermediate flooding conditions. When the plants were matured, the stem length of infected plants was reduced slightly as compared to normal plants, whereas the length of panicle was not significantly different between infected and healthy plants. The number of panicle per plant, however, greatly different with variation of infection degree. Grain quality such as the number of complete and incomplete grains per panicle, the complete grain weight per panicle, and the weight of 1000 grains was not significantly different.

• Journal of the Korean Magnetics Society
• /
• v.11 no.1
• /
• pp.26-31
• /
• 2001

The effect of MoO$_3$ addition on the permeability of Mn-Zn ferrites was studied. 600 ppm, 800 ppm and 1,000 ppm of MoO$_3$ were added to the main composition after calcination. Ferrite cores were sintered at 135$0^{\circ}C$ for 3hrs, followed by cooling according to the equilibrium oxygen concentration. The initial permeability was about 8,000 with heating rate 5$^{\circ}C$/min for 3hrs without MoO$_3$ addition. When 600 ppm and 800 ppm of MoO$_3$ were added, the initial permeabilities, 13,200 and 13,550 were obtained, respectively. However, the sample with 1,000 ppm MoO$_3$ showed lower permeabilities because of abnormal grain growth. At the heating rate 1$0^{\circ}C$/min, the ferrite cores with 1,000 ppm MoO$_3$ demonstrated the highest initial permeability greater than 15,000, without exaggerated grain growth.