• 대한소아치과학회지
• /
• 제44권1호
• /
• pp.116-121
• /
• 2017

상악 제2유구치의 부가치근은 드물게 관찰된다. 본 증례보고에서는 두 증례를 통해 상악 제2유구치의 부가치근과 하방 영구 계승치의 변위 및 회전이 연관되었을 가능성에 대해 논의하였다. 상악 제2유구치의 치관 형태를 관찰함으로써 부가치근의 존재 가능성을 의심할 수 있으며, 부가치근이 존재하는 경우 영구 계승치의 맹출 양상을 주의 깊게 관찰해야 할 필요가 있을 것으로 사료된다. 만약 소구치 치배가 비정상적인 맹출 양상을 보인다면 선행 유치의 조기 발거 및 공간유지가 보존적인 치료법이 될 수 있다.

• 한국지반공학회논문집
• /
• 제18권1호
• /
• pp.71-78
• /
• 2002

본 연구에서는 다층지반에 근입된 흙막이 벽의 단계별 계측변위로부터 각 층의 지반물성을 추정하고 이로부터 차기단계의 거동을 예측하기 위한 역해석 기법을 제안하였다. 지반이 다수의 층으로 구성되어 있을 경우 찾아야 할 대상변수가 많아지게 되며, 대상변수가 많아질수록 역해석에 상당한 무리가 따르게 된다. 이러한 층별 지반물성을 효율적으로 추정하기 위하여 최하단층부터 순차적으로 대상변수들을 찾아가는 방법을 이용하였다. 역해석은 상당량의 반복계산이 필요하기 때문에 정해석 방법으로는 해석시간이 짧고 시공단계 별 해석이 가능한 탄소성보법을 사용하였다. 역해석 대상변수는 탄소성 하중-변위 곡선의 구성요소인 지반반력계수와 수평토압계수들을 취하였으며, 목적함수는 이상변위에 의한 오차를 최소화시키기 위하여 단계별 계측변위 증분과 해석변위 증분의 차이로 구성하였다. 목적함수를 최소화 시키는 대상변수들을 찾기 위한 최적화 수법으로는 제약순차선형계획 법을 이용하였다. 본 연구를 통하여 제안된 방법을 수치해석자료 및 현장계측자료를 이용하여 검증하였다.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제28권2호
• /
• pp.136-142
• /
• 2006

Temporomandibular joint(TMJ) disorders have characteristic clinical findings such as pain, joint sound, and abnormal jaw function. With the rapid progress in TMJ imaging techniques, magnetic resonance imaging(MRI) especially provides the clinician and researcher with the ability to evaluate TMJ disorders(effusion, anterior disk displacement) and the hard and soft tissue of the TMJ. In order to manage the internal derangement of TMJ such as anterior disk displacement, the so-called appliance therapy is commonly used. This technique became the treatment of choice before surgical intervention by many practitioners. The purpose of the present study was to evaluate and determine the efficacy of anterior repositioning splint by means of the change of the position of the disk through pre- and post-treatment MRI. MRI and clinical symptom were carefully recorded in TMJ disorder patients. The relationship between TMJ symptoms such as pain, clicking sound, and disk displacement and effusion in MRI were analyzed. Then, splint therapy was applied for 3 months according to our protocol; at day 1, patients should wear 24 hours, in order to accomodate the splint and then, wearing time is reduced to 12 hours per day for one month. During next 2 months, it is tapered to 8 hours per day according to the evaluation of the clinical symptoms. Post-treatment MRI was obtained after 3 month protocol. This treatment strategy improved the clinical symptoms of TMJ disorder, and effusion and articular disk position showed a significant change. In conclusion, a treatment modality using an anterior repositioning splint therapy is an appropriate method for temporomandibular disorder patients.

• 한국지반신소재학회논문집
• /
• 제17권2호
• /
• pp.9-18
• /
• 2018

본 연구에서는 사면 붕괴시 거동특성을 분석하기 위하여 실규모 사면 붕괴 모의실험을 수행하고, 계측된 자료를 역변위와 분석구간(K)의 변화에 따른 x-MR 관리도를 통해 분석하였다. 본 연구 결과, 역변위와 x-MR 관리도 분석에서 사면이 최종 붕괴하기 4분 앞선 시점에서 붕괴 위험징후를 확인하였다. 분석구간에 따른 관리 한계선의 변화를 분석한 결과, x-MR 관리도 작성시 K는 3을 적용하는 것이 효과적이며, 역변위의 x-MR 관리도 기법을 활용함으로써 보다 신속하고 객관적인 판단을 통해 사면 이상거동에 대한 사전예측에 도움이 될 것으로 판단된다. 통계관리도 기법을 적용한 사면붕괴 예측기법은 사면 계측관리기준의 기초자료로 활용이 가능하며, 사면 재해로 인한 인명 및 재산피해 경감에 기여할 수 있을 것으로 판단된다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2011년도 추계학술대회 논문집
• /
• pp.325-330
• /
• 2011

RCP(Reactor coolant pump) must be designed to preserve it's functions on normal or abnormal environments and seismic event same as operating basis earthquake(OBE) and safe shutdown earthquake(SSE). Generally, there are static and dynamic analytical method which can be applied by a floor response spectrum or time history analysis for the seismic qualification. Initially, It was accomplished a detailed structural FE-model for finite element analysis on the bases of 3-dimensional solid model which was made by the RCP drawing. As the result of dynamic characteristic using the detailed FE-model, it's shown about 12Hz natural frequency of 1st bending mode shape and maximum displacement has 11mm with the structural bending by single-point response spectrum(SPRS) method at all elevation. But maximum displacement has 7.6mm by multi-point response spectrum(MPRS) method which was applied to the three floor response spectrum at each elevation. Therefore, On a large heighten structures as RCP, The application by SPRS method causes to be more conservative results. Finally, A simpled equivalent beam model which was developed by use of iteration of detailed FE-model is shown the result more similar with those of natural frequencies and SPRS analysis. And maximum equivalent stress and displacement of the simpled beam has verified with 180MPa and 7.1mm each at 15sec as results by SSE time history method.

• Journal of Electrical Engineering and Technology
• /
• 제10권1호
• /
• pp.176-187
• /
• 2015

DC bias will cause abnormal vibration of transformers. Aiming at such a problem, transformer vibration affected by DC bias has been studied combined with transformer core and winding vibration mechanism use multi-physical field simulation software COMSOL in this paper. Furthermore the coupling model of electromagnetic-structural force field has been established, and the variation pattern of inner flux density, distribution of mechanical stress, tension and displacement were analyzed based on the coupling model. Finally, an experiment platform has been built up which was employed to verify the correctness of model.

• 혜화의학회지
• /
• 제16권1호
• /
• pp.157-166
• /
• 2007

Objectives : The purpose of this study is to search for more effective methods of diagnosis and treatment of Fracture. Methods : Literature review on Fracture in view of oriental and western medicine. Conclusions : Fracture is classified by anatomical location, grade, shape of line, displacement and cause. The symptom of Fracture is pain, tenderness, deformity, attitude, abnormal mobility, crepitus, neurovascular injury. Fracture is not the same in Healing process by location. The age, endocrine system, chronic debilitating disease, stabilization is effect on healing period and process. Treatment of Fracture is classified emergency care, definite treatment and rehabilitation.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2001년도 정보화시공 학술발표회
• /
• pp.19-27
• /
• 2001

Early detection of premonitory symptom of slope movement ensures tremendous saving of lives and repair costs from catastrophic disaster. Therefore, it is essential to constantly monitor the performance and integrity of both reinforced and un-reinforced cut slopes. We developed a novel monitoring system by using tension wire sensors. It's advantages are highly sensitivity, simple installation, large displacement measurement, durability of system, capability of remote sensing. Real-time measurement of slope surface movement is shown graphically and it gives a warning when the monitored value exceeds a given threshold level so that any sign of abnormal slope movement can be easily perceived.

• 대한기계학회논문집
• /
• 제19권2호
• /
• pp.580-590
• /
• 1995

To design and develop a turbocharged engine, ti needs that many study must be preceded about the characteristics of engine performance. Especially, a basic data about deciding target power is urgently needed for which is practically useful for engine design. The power output of turbo-charged engine is dominated by engine speed, displacement, compression ratio, air fuel ratio and charge pressure ratio. Therefore, the independent effect of these factors on power output was clarified from experiment, and the experimental equation to predict the power was founded from there results. The predicted power output from the experimental equation was well coincided with power measured through experiment.

• 지구물리
• /
• 제8권3호
• /
• pp.137-143
• /
• 2005

Early detection of premonitory symptom of slope movement ensures tremendous saving of lives and repair costs from catastrophic disaster. Therefore, it is essential to constantly monitor the performance and integrity of both reinforced and un-reinforced cut slopes. We developed a novel monitoring system by using tension wire sensors. It's advantages are highly sensitivity, simple installation, large displacement measurement, durability of system, capability of remote sensing. Real-time measurement of slope surface movement is shown graphically and it gives a warning when the monitored value exceeds a given threshold level so that any sign of abnormal slope movement can be easily perceived.