• Journal of the korean academy of Pediatric Dentistry
• /
• v.44 no.1
• /
• pp.116-121
• /
• 2017

An additional root of the primary maxillary second molar is rarely observed. Two cases are presented herein, and we discuss a possible association between additional root of the primary maxillary second molar and displacement and rotation of the permanent successor. Investigation of crown morphology enables the detection of a potential additional root of the primary maxillary second molar, and eruption of the permanent successor needs to be examined carefully if an additional root is present. Early extraction of primary molar and space maintenance can be used as a conservative treatment if the premolar germ shows an abnormal eruption pattern.

• Journal of the Korean Geotechnical Society
• /
• v.18 no.1
• /
• pp.71-78
• /
• 2002

This paper presents a back-calculation technique leer the prediction of the behavior of earth wall inserted in multi-layered soil deposit. The soil properties are back-calculated from the measured displacement at each construction stage and the behavior of earth wall far the next construction stage is predicted using back-calculated soil properties. For multi-layered soil deposit, the back-calculation would be very difficult due to the increase in the number of variables. In this study, to solve this difficulty, the back-calculation was performed successively from the lowest layer to the upper layers. An efficient elasto-plastic beam-column analysis was used for forward analysis to minimize the computation time of iterative back-calculation procedure. The coefficients of subgrade reaction and lateral earth pressure necessary for the formation of p-y curve were selected as back calculation variables, and to minimize the effect of abnormal behavior of the wall which might be caused by any unexpected action during construction, the difference between measured displacement increment and computed displacement increment at each construction stages is used as the objective function of optimization. The constrained sequential linear programming was used for the optimization technique to found values of variables minimizing the objective function. The proposed method in this study was verified using numerically generated data and measured field data.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.28 no.2
• /
• pp.136-142
• /
• 2006

Temporomandibular joint(TMJ) disorders have characteristic clinical findings such as pain, joint sound, and abnormal jaw function. With the rapid progress in TMJ imaging techniques, magnetic resonance imaging(MRI) especially provides the clinician and researcher with the ability to evaluate TMJ disorders(effusion, anterior disk displacement) and the hard and soft tissue of the TMJ. In order to manage the internal derangement of TMJ such as anterior disk displacement, the so-called appliance therapy is commonly used. This technique became the treatment of choice before surgical intervention by many practitioners. The purpose of the present study was to evaluate and determine the efficacy of anterior repositioning splint by means of the change of the position of the disk through pre- and post-treatment MRI. MRI and clinical symptom were carefully recorded in TMJ disorder patients. The relationship between TMJ symptoms such as pain, clicking sound, and disk displacement and effusion in MRI were analyzed. Then, splint therapy was applied for 3 months according to our protocol; at day 1, patients should wear 24 hours, in order to accomodate the splint and then, wearing time is reduced to 12 hours per day for one month. During next 2 months, it is tapered to 8 hours per day according to the evaluation of the clinical symptoms. Post-treatment MRI was obtained after 3 month protocol. This treatment strategy improved the clinical symptoms of TMJ disorder, and effusion and articular disk position showed a significant change. In conclusion, a treatment modality using an anterior repositioning splint therapy is an appropriate method for temporomandibular disorder patients.

• Journal of the Korean Geosynthetics Society
• /
• v.17 no.2
• /
• pp.9-18
• /
• 2018

In this study, a field model experiment was performed to analyze the bahavior of slope during failure. It was analyzed through x-MR control chart method with inverse displacement and K-value. As a result, the portent was confirmed at 4 minutes before slope failure in Case 1. The change of the control limit line according to moving range was analyzed and it was effective to apply K = 3. Use of the inverse displacement and x-MR control chart method will be useful for the prediction of abnormal behavior through quick and objective judgment. Prediction of slope failure using control chart method can be used as basic data of slope measurement management standard, and it can contribute in reduction of life and property damage caused by slope disaster.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2011.10a
• /
• pp.325-330
• /
• 2011

RCP(Reactor coolant pump) must be designed to preserve it's functions on normal or abnormal environments and seismic event same as operating basis earthquake(OBE) and safe shutdown earthquake(SSE). Generally, there are static and dynamic analytical method which can be applied by a floor response spectrum or time history analysis for the seismic qualification. Initially, It was accomplished a detailed structural FE-model for finite element analysis on the bases of 3-dimensional solid model which was made by the RCP drawing. As the result of dynamic characteristic using the detailed FE-model, it's shown about 12Hz natural frequency of 1st bending mode shape and maximum displacement has 11mm with the structural bending by single-point response spectrum(SPRS) method at all elevation. But maximum displacement has 7.6mm by multi-point response spectrum(MPRS) method which was applied to the three floor response spectrum at each elevation. Therefore, On a large heighten structures as RCP, The application by SPRS method causes to be more conservative results. Finally, A simpled equivalent beam model which was developed by use of iteration of detailed FE-model is shown the result more similar with those of natural frequencies and SPRS analysis. And maximum equivalent stress and displacement of the simpled beam has verified with 180MPa and 7.1mm each at 15sec as results by SSE time history method.

• Journal of Electrical Engineering and Technology
• /
• v.10 no.1
• /
• pp.176-187
• /
• 2015

DC bias will cause abnormal vibration of transformers. Aiming at such a problem, transformer vibration affected by DC bias has been studied combined with transformer core and winding vibration mechanism use multi-physical field simulation software COMSOL in this paper. Furthermore the coupling model of electromagnetic-structural force field has been established, and the variation pattern of inner flux density, distribution of mechanical stress, tension and displacement were analyzed based on the coupling model. Finally, an experiment platform has been built up which was employed to verify the correctness of model.

• Journal of Haehwa Medicine
• /
• v.16 no.1
• /
• pp.157-166
• /
• 2007

Objectives : The purpose of this study is to search for more effective methods of diagnosis and treatment of Fracture. Methods : Literature review on Fracture in view of oriental and western medicine. Conclusions : Fracture is classified by anatomical location, grade, shape of line, displacement and cause. The symptom of Fracture is pain, tenderness, deformity, attitude, abnormal mobility, crepitus, neurovascular injury. Fracture is not the same in Healing process by location. The age, endocrine system, chronic debilitating disease, stabilization is effect on healing period and process. Treatment of Fracture is classified emergency care, definite treatment and rehabilitation.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2001.10c
• /
• pp.19-27
• /
• 2001

Early detection of premonitory symptom of slope movement ensures tremendous saving of lives and repair costs from catastrophic disaster. Therefore, it is essential to constantly monitor the performance and integrity of both reinforced and un-reinforced cut slopes. We developed a novel monitoring system by using tension wire sensors. It's advantages are highly sensitivity, simple installation, large displacement measurement, durability of system, capability of remote sensing. Real-time measurement of slope surface movement is shown graphically and it gives a warning when the monitored value exceeds a given threshold level so that any sign of abnormal slope movement can be easily perceived.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.19 no.2
• /
• pp.580-590
• /
• 1995

To design and develop a turbocharged engine, ti needs that many study must be preceded about the characteristics of engine performance. Especially, a basic data about deciding target power is urgently needed for which is practically useful for engine design. The power output of turbo-charged engine is dominated by engine speed, displacement, compression ratio, air fuel ratio and charge pressure ratio. Therefore, the independent effect of these factors on power output was clarified from experiment, and the experimental equation to predict the power was founded from there results. The predicted power output from the experimental equation was well coincided with power measured through experiment.

• Journal of the Korean Geophysical Society
• /
• v.8 no.3
• /
• pp.137-143
• /
• 2005

Early detection of premonitory symptom of slope movement ensures tremendous saving of lives and repair costs from catastrophic disaster. Therefore, it is essential to constantly monitor the performance and integrity of both reinforced and un-reinforced cut slopes. We developed a novel monitoring system by using tension wire sensors. It's advantages are highly sensitivity, simple installation, large displacement measurement, durability of system, capability of remote sensing. Real-time measurement of slope surface movement is shown graphically and it gives a warning when the monitored value exceeds a given threshold level so that any sign of abnormal slope movement can be easily perceived.