• Nuclear Engineering and Technology
• /
• 제32권4호
• /
• pp.410-423
• /
• 2000

A two-dimensional numerical model is developed and applied to the LAVA-EXV tests performed at the Korea Atomic Energy Research Institute (KAERI) to investigate the external cooling effect on the thermal margin to failure of a reactor pressure vessel (RPV) during a severe accident. The computational program was written to predict the temperature profile of a two-dimensional spherical vessel segment accounting for the conjugate heat transfer mechanisms of conduction through the debris and the vessel, natural convection within the molten debris pool, and the possible ablation of the vessel wall in contact with the high temperature melt. Results of the sensitivity analysis and comparison with the LAVA-EXV test data indicated that the developed computational tool carries a high potential for simulating the thermal behavior of the RPV during a core melt relocation accident. It is concluded that the main factors affecting the RPV failure are the natural convection within the debris pool and the ablation of the metal vessel, The simplistic natural convection model adopted in the computational program partly made up for the absence of the mechanistic momentum consideration in this study. Uncertainties in the prediction will be reduced when the natural convection and ablation phenomena are more rigorously dealt with in the code, and if more accurate initial and time-dependent conditions are supplied from the test in terms of material composition and its associated thermophysical properties.

• 대한방사선기술학회지:방사선기술과학
• /
• 제38권2호
• /
• pp.155-161
• /
• 2015

본 연구는 고주파 열치료 시 내부냉각방식 cool-tip의 냉각수 온도에 따른 소작 특성을 확인하기 위하여 소간을 이용하여 냉각수 온도변화에 따른 소간의 소작 특성의 변화를 통해 냉각수 온도변화와 소작 특성의 상관관계를 확인하고자 하였다. 실험에 사용된 소간은 2 cm cool-tip 사용 시 $4{\times}4{\times}4cm^3$, 3 cm인 cool-tip 사용 시에는 $6{\times}6{\times}6cm^3$로 소간을 절제하였으며, 소작된 소간은 MRI를 이용하여 영상검사를 실시하였으며, Freehand 기법으로 소작된 부위의 면적과 둘레를 측정하였다. 2 cm, 3 cm cool-tip을 사용하여 6분, 12분 소작 시 cool-tip 온도가 상승함에 따라 면적과 둘레는 감소함을 나타냈으며, cool-tip 온도와 면적 및 둘레의 상관관계는 통계학적으로 유의한 결과를 나타내었다(p=.000). 소작 범위에 대한 실제 측정과 MRI을 이용한 측정을 비교한 결과 MRI를 이용한 면적과 둘레 측정이 더 정확한 것을 확인하였으며, 대응표본 T-검정을 이용한 통계적 결과 또한 유의하였다(p=.038). 고주파 열치료 장비의 cool-tip 냉각수 온도가 증가함에 따라 소간의 소작 범위가 감소한 원인은 고주파 열치료 장비의 에너지가 정확히 전달되지 못하고 탄화가 발생하기 때문이다. 따라서 고주파 열치료에서 탄화의 발생을 줄이고, 고주파 에너지가 정확히 전달되어 치료 효과를 높이기 위해서는 냉각수의 온도를 낮은 온도로 일정하게 유지하여 사용하여야 고주파 열치료의 효과가 증대될 것이라 사료된다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2001년도 춘계학술대회 논문집
• /
• pp.914-917
• /
• 2001

Single-shot laser damage of thin Cr films on glass substrates has been studied to understand the cracking and peeling-off mechanism. A numerical model is developed for the calculation of transient heat transfer and thermal stresses in Cr films during excimer laser irradiation and cooling, the transient temperature, and the stress-strain fields are analyzed by using a three-dimensional finite-element model of heat flow. According to the numerical analysis for the experimentally determined cracking and peeling-off conditions, cracking is found to be the result of the tensile brittle fracture due to the excessive thermal stresses formed during the cooling process, while peeling-off is found to be the combined result of films bulging from the softened glass surface at higher temperature and the tensile brittle fracture during the cooling process.

• 에너지공학
• /
• 제23권3호
• /
• pp.21-26
• /
• 2014

유럽 원전 시장 개척을 위해 개발 중인 EU-APR1400은 중대사고 대처설비로 노외 노심용융물 보유 및 냉각을 위한 소위 Core catcher라 불리는 노외 노심용융물 냉각설비를 개발 중이며, Core catcher body를 노심용융물로부터 보호하기 위하여 노심용융물의 물성 및 상태를 변화시켜 냉각 및 보유에 유리하게 하는 희생물질을 설치한다. 중대사고 시 원자로 압력용기의 틈으로부터 노심용융물이 분출되어 희생물질에 충돌 시 열 전달량이 매우 증가하게 되므로, 이 때 노심용융물 제트의 충돌에 의한 희생물질의 침식율을 정확하게 예측하는 것은 매우 중요하다. 이 논문에서는 경계층 이론을 기반으로 한 희생물질 침식 모형을 제안하고 KAERI에서 수행한 실험결과와 비교하였다.

• Bulletin of the Korean Chemical Society
• /
• 제33권9호
• /
• pp.2955-2960
• /
• 2012

Product ion yields in the in- and post-source decays of three peptide ions, $[Y_5X+H]^+$ (X = Y (tyrosine), K (lysine), and R (arginine)), generated by matrix-assisted laser desorption ionization (MALDI) were measured at six wavelengths, 307, 317, 327, 337, 347, and 357 nm, using ${\alpha}$-cyano-4-hydroxycinnamic acid (CHCA) and 2,5-dihydroxybenzoic acid (DHB) as the matrices. The temperatures of the early and late plumes generated by MALDI were estimated via kinetic analysis of the product ion yield data. For both matrices, the temperature drop (${\Delta}T$), i.e. the difference in the temperature between the early and late plumes, displayed negative correlation with the absorption coefficient. This was in agreement with the previous reasoning that deeper laser penetration and larger amount of material ablation arising from smaller absorption coefficient would result in larger extent of expansion cooling. The results support the postulation of the expansion cooling occurring in the plume presented previously.

• Journal of Oral Medicine and Pain
• /
• 제22권1호
• /
• pp.125-135
• /
• 1997

The Author examined the clinical and histological changes on the dorsal tongue mucosa of the adult rats after lasing by pulsed Nd:YAG laser and incising with scalpel. The dorsal tongue was lased through 320$\mu\textrm{m}$optic fiber moving 2.5mm/second to make linear incision 5mm. The five conditions of lasing were three application with 1.0W, 1.75W, 3.0W and 3.0W under saline cooling, and single application with 3.0W at 20Hz. With scalpel, linear incisions through the surface epithelium were performed to 5mm in length. After observing the clinical changes of the incised wounds, the animals were sacrified and the tissues were excised to make the tissue specimens. The stained microscopic tissue slide were observed histologically under the microscope. The following results were obtained : 1. While incision with scalpel causes severe bleeding, lasing does not cause bleeding. 2. In three applications with 1.75W and 20Hz, tissue ablation was limited to areas contacted with optic fiber. 3. In three applications with 3.0W and 20Hz, deep incised wound, extensive destruction of the adjacent epithelium and charring were observed. 4. In three applications with 3.0W and 20Hz under saline cooling, tissue ablation was limite to the superficial mucosa and charring was not observed. 5. In single application with 3.0W and 20Hz, the shape of the incised wound was similar to that of the scalpel incision.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회B
• /
• pp.3491-3496
• /
• 2007

If a molten core is released from a reactor vessel into a reactor cavity during a severe accident, an important safety issue of coolability of the molten core from top-flooding and concrete ablation due to a molten core concrete interaction (MCCI) is still unresolved. The released molten core debris would attack the concrete wall and basemat of the reactor cavity, which will lead to inevitable concrete decompositions and possible radiological releases. In a OECD/MCCI project scheduled for 4 years from 2002. 1 to 2005. 12, a series of tests were performed to secure the data for cooling the molten core spread out at the reactor cavity and for the 2-D long-term core concrete interaction (CCI). The tests included not only separate effect tests such as a melt eruption, water ingression, and crust failure tests with a prototypic material but also 2-D CCI tests with a prototypic material under dry and flooded cavity conditions. The paper deals with the transient simulations on the CCI-2 test by using a severe accident analysis code, CORQUENCH, which was developed at Argonne National Laboratory (ANL). Similar simulations had been already per for me d by using MELCOR 1.8.5 code. Unlike the MELCOR 1.8.5, the CORQUENCH includes a melt eruption mode I and a newly developed water ingression model based on the water ingression tests under the OECD/MCCI project. In order to adjust the geometrical differences between the CCI-2 test (rectangular geometry) and the simulations (cylindrical geometry), the same scaling methodology as used in the MELCOR simulation was applied. For the direct comparison of the simulation results, the same inputs for the MELCOR simulation were used. The simulation results were compared with the previous results by using MELCOR 1.8.5.

• 한국정밀공학회지
• /
• 제30권12호
• /
• pp.1265-1271
• /
• 2013

In this work, modeling and analysis of thermal effects laser drilling under water for ceramics were presented. Laser is a unique tool for machining ceramics due to the characteristic of non-contact material removal. However, ablation by a laser often induces a thermal effect on the material and an increased heat-affected-zone or deposition of debris can be observed on the machined parts. The underwater surrounding improved a heat transfer rate to cooling down the machined part and could prevent any deposition of debris near the machined surfaces and edges. The heat modeling was applied to obtain the temperature distributions as well as temperature gradients between the material and surroundings. The cooling effect of the underwater laser drilling was improved and a more stable temperature distribution was calculated. The actual laser drilling results of ceramic laser drilling were presented to verify the effects of underwater laser drilling.

• 대한기계학회논문집B
• /
• 제31권10호
• /
• pp.832-839
• /
• 2007

The geometry and dimensions of an expansion chamber are decisive factors in thermal puffer plasma chamber designs. Because they together dominate the temperature and speed at which the cooling gas from the chamber flows back through a flow channel to the arcing zone for the successful interruption of fault currents. In this study, we calculated the flow and mass transfer driven by arc plasma, and investigated the effects of a flow guide installed inside a thermal puffer plasma chamber. It is found that the existing cold gas of the chamber mixes with hot gases entrained from the arcing zone and is subjected to compression due to pressure build-up in the chamber. The pressure build-up with the flow guide is larger than that without due to a vortex which rotates clockwise around the chamber center. By the reverse pressure gradient, the mixing gas of the chamber flows back out for cooling down the residual plasma near current zero. In the case with the flow guide, the temperature just before current zero is lower than that without, and the Cu concentration with high electrical conductivity is also less than that without the flow guide.

• 한국추진공학회지
• /
• 제4권3호
• /
• pp.38-44
• /
• 2000

통상적으로 액체로켓의 노즐은 재생냉각에 의해 고온의 연소가스로부터 보호된다. 그러나 재생 냉각의 경우, 시스템에 상당한 투자가 요구되며, 잦은 엔진 결함의 원인을 제공하기도 한다. 최근들어 액체로켓에 재생냉각을 사용하지 않고, 연소실과 노즐 보호를 위해 삭마재료가 사용되고 있다. 노즐재료에 대한 삭마량과 삭마형상 연구를 위해 500회 이상의 연소실험이 수행되었다. 그러나 연소실험을 통한 삭마특성은 전혀 예측할 수 없는 방향으로 진행되고 있으며, 실험에 사용된 액체로켓의 작동범위가 실제 로켓과 거의 유사하다는 것을 감안한다면, 삭마재질을 로켓에 적용하기 위해서는 상당한 주의가 필요할 것으로 판단된다. 실험변수는 추진제의 공급 순서, 인젝터의 형상, 점화기의 위치, 그리고 액체산소의 공급온도이다.