• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2006년도 추계학술대회논문집
• /
• pp.725-738
• /
• 2006

The final purpose of this study is to develop noise abatement procedures for minimizing damages caused by aircraft noise, to establish appropriate noise limits and to suggest a plan for imposing surcharges and penalties on aircraft infringing the noise limits. This study establishes noise abatement procedures and suggests a plan to complement and improve upon NMS in Gimpo International Airport by reviewing the NMS structure. In addition, this study establishes a noise limit at each noise monitoring system and a verification system to discriminate infringing aircraft. Finally, this study suggests a control plan for aircraft infringing the noise limit.

• 한국소음진동공학회논문집
• /
• 제17권5호
• /
• pp.379-390
• /
• 2007

The final purpose of this study is to develop noise abatement procedures for minimizing damages caused by aircraft noise, to establish appropriate noise limits and to suggest a plan for imposing surcharges and penalties on aircraft infringing the noise limits. This study establishes noise abatement procedures and suggests a plan to complement and improve upon NMS in Gimpo International Airport by reviewing the NMS structure. In addition, this study establishes a noise limit at each noise monitoring system and a verification system to discriminate infringing aircraft. Finally, this study suggests a control plan for aircraft Infringing the noise limit.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2008년도 춘계학술대회논문집
• /
• pp.899-903
• /
• 2008

The purpose of this study is to establish the noise abatement procedures in Kimhae International Airport and also make noise limit and methods to monitor and detect an aircraft flying over Kimhae airport. First of all, noise monitoring system(NMS) should be set up, have a test and noise limit will be adjusted afterwards. Before applying Noise Abatement Procederes and noise limit, the amendment of Aviation Law 'article 108' required to proceed. The accumulative data and long term process of NMS will proceed and it is necessary to issue a notification of noise limit in phases.

• 한국의류산업학회지
• /
• 제2권5호
• /
• pp.411-415
• /
• 2000

To be able to work safely and efficiency, the Threshold Limit Values (TLV) for work in the heat are widely used. Since these TLV are only applicable to workers in regular clothing, TLV should be adjusted when applied to the asbestos removal workers who wear extra impermeable protective clothing. Although abbreviated guidelines for heat stress exposure have been proposed, literature advocating their use in the asbestos removal industry is limited. Therefore, we planed a survey to evaluate the workload of asbestos abatement workers in summer, and an experiment with climatic chambers to evaluate the effects of resting in a cool environment between work periods. From these studies, we got following conclusions. There is a high risk of suffering from heat illness by asbestos abatement work in summer in Japan. It is proposed to create a cool room inside the workplace of asbestos abatement work to reduce thermal stress.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2011년도 추계학술대회 논문집
• /
• pp.558-567
• /
• 2011

One of the main objectives of noise control act is to define and ensure application and respect of noise exposure limits. Most advanced countries have prepared a legal framework for noise limits either by national laws, ordinances or municipal by-laws. A large number of advaced countries have adopted the $L_{eq}$ index for the main sources of noise (road, railway, industry). The exception is aircraft noise for which regulatory practice is highly disparate. These differences in the indices adopted, the periods and areas to which regulations apply, definitions of measurement conditions and ways in which noise levels are calculated make it difficult to compare the current advanced countries standards. This study presents the current noise abatement policy of the advanced countries and proposes the improvement of the current noise abatement policy of Korea to catch up with it of the advanced countries.

• International Journal of Air-Conditioning and Refrigeration
• /
• 제13권2호
• /
• pp.61-70
• /
• 2005

This study treats the numerical analysis of performance and design for plume abatement wet/dry cooling tower with a dry type heat exchanger. A two-dimensional analysis is performed using the finite volume method for mechanical draft counterflow and crossflow tower. For a coupling problem between water and air system, a turbulent two phase flow is considered. The Effectiveness-NTU method is used for modeling of the dry type heat exchanger. The parametric simulations such as the relative flowrate of air and attachment length of an air mixer are performed to examine the effect on plume abatement. It is found that if the relative air flowrate ratio and the adequate air mixer type are chosen well in addition to the ratio of water to air flowrate, the loss of cooling capacity and the additional cost are reduced and the plume is abated.

• 환경정책연구
• /
• 제6권4호
• /
• pp.55-81
• /
• 2007

CGE모형을 이용하여 우리나라를 포함한 OECD 국가와 중국, 브라질 등 18개 국가를 대상으로 다양한 비율의 $CO_2$ 저감량이 할당되는 경우 그에 따라 예상되는 국가별 GDP손실액을 추정하고 그 결과를 이용하여 각국의 $CO_2$ 저감에 따른 총비용곡선, 한계비용곡선, 평균비용곡선의 형태를 비교하였다. 대다수 국가의 총비용곡선, 한계비용곡선 그리고 평균비용곡선은 우상 향하는 형태를 나타내었으나 국가별로 실행가능한 저감영역이 다르고 또 각 함수의 기울기와 절편 등이 다르게 나타났다. 향후 post-kyoto 온실가스감축 의무부담방안 협상 시 온실가스 저감에 따른 각국의 GDP손실액 유형을 고려하여 우리나라와 비슷한 패턴을 가지고 있는 국가들과 공동으로 의무부담방안을 모색하는 것이 필요하다.

• 한국축산시설환경학회지
• /
• 제14권1호
• /
• pp.31-38
• /
• 2008

자연환기식 육성 비육돈사의 내부 사육환경을 개선하고자 돈사내부에 악취탈취장치를 설치하였다. 악취탈취장치에서 탈취한 공기는 덕트를 이용하여 돈사내부에 분배되도록 하였다. 악취탈취장치의 가동에 따른 내부의 환경은 돈사의 측벽에 설치된 윈치커튼을 닫아 관리하기 때문에 내부의 환경이 열악해지는 겨울철에 실시하였다. 악취탈취장치를 가동하면서 분석한 돈사의 내부환경 개선효과는 다음과 같다. 1. 돈사내부에 설치한 악취탈취장치에서 탈취된 후 배출된 공기를 돈사내부에 재분배함으로써 악취탈취장치 가동전보다 돈사내부의 암모니아 가스 농도를 약 33.3% 줄일 수 있는 것으로 나타났다. 2. 돈사의 암모니아 가스 저감효과는 돈사의 환기율이 $0.5m^3/m$ 두 이하인 경우에 나타났으며, 환기율이 많아지면 외부의 신선한 공기의 유입에 의해 희석되는 양이 악취탈취 장치에서 배출된 공기량보다 많아 악취탈취 장치 가동에 의한 내부 환경개선 효과는 작은 것으로 나타났다. 3. 육성 비육돈사에 악취탈취장치를 가동하면서 돼지를 입식하여 출하 때까지 사육한 결과 악취탈취장치 설치전과 비교하여 돼지의 폐사율이 약 3.8% 줄어들었으며, 탈취장치 가동후 돈사내부에 관리를 위해 들어갈 때 눈 따가움, 부유먼지 등이 크게 줄어든 것으로 나타났다.

• 한국산업보건학회지
• /
• 제19권1호
• /
• pp.8-15
• /
• 2009

This study was examined to find out asbestos exposure level the factors which affected the level at asbestos abatement sites. We visited a total of thirteen building demolition sites(3 apartments, 3 schools, 4 stores, and 3 houses) were visited to collect samples and related data from August to November, 2006. The results of this study were as follows 1. The results of an analysis of bulk samples to identify types of asbestos at the asbestos abatement sites showed that the kinds of the asbestos detected were chrysotile by 50.0%, were tremolite by 2.6%, and were the contents of chrysotile by 3 to 20%. 2. The geometric mean concentration of asbestos was 0.007 f/cc(range 0.001-0.34 f/cc) and its geometric standard deviation was 5.83. Of the samples, however, 12 exceeded the Korean Occupational Exposure Limit(0.1f/cc). 3. Of the materials, textile material had the highest concentration with geometric mean of 0.016 f/cc. When asbestos-containing materials were removed using T type tools, the geometric mean concentration of asbestos was 0.061 f/cc. The level by this method was much higher than by other removal methods. In analysis by the type of building, the geometric mean concentration of asbestos in stores was 0.042 f/cc and was higher than in other buildings. 4. The Poisson regression analysis was applied to find out the factors that affect the airborne asbestos concentration. As a result of the analysis, removal using a T type tool was the most important factor affecting the asbestos concentration(p<0.01). In conclusion, the airborne asbestos concentration(geometric mean) in asbestos abatement sites was 0.007 f/cc(0.001~0.34 f/cc), and 12(14.6%) of all samples were over the 0.1 f/cc. These results showed that asbestos abatement workers have been exposed to the high level of airborne asbestos because they have not been keeping asbestos removal rule. In accordance with increases of the number of building demolition sites, the better government regulation on asbestos abatement methods should be made and be performed well at building demolition sites.

• 한국산업보건학회지
• /
• 제30권2호
• /
• pp.205-212
• /
• 2020

Objectives: The purpose of this study was to identify the needs and improvement measures of the risk assessment system through a survey of asbestos abatement companies. Methods: This study prepared a questionnaire that includes improvement measures for the risk assessment system(six questions) and the necessity of a risk assessment system for asbestos abatement(one question). The questionnaire was sent to 2,170 asbestos abatement companies and returned by 83 companies(return rate = 3.8%). We conducted frequency analysis, ANOVA, and Chi-squared testing at the 5% significance level. Results: This study analyzed the survey results and identified six main opinions on the risk assessment system and improvement measures. First, giving an advantage to companies with a high grade(S and A grades) in public bidding and/or qualification screening showed a similar preference(agree: 50.6%, disagree: 49.4%). Second, 57.6% of the respondents wanted to allow air showers along with water showers for low risk asbestos work. However, 23.2% of the respondents asserted that only a water shower should be allowed since there is no scientific evidence supporting the removal of asbestos by air shower. Third, in order to prevent missing the enrollment of workers, simply submitting a change report should be allowed when any worker is changed (40.0%). Fourth, 43% of the respondents answered that they did not know how to calculate the proper number of negative pressure units. The reasons given were a lack of guidelines or standards(38.9%), inconvenience (36.1%), and absence of education(25%). Fifth, the respondents who were favorable toward the necessity of a risk assessment system gave higher scores compared to unfavorable respondents on the necessity of the management of workers' work history(favorable respondent = 3.96 out of 5, unfavorable respondent = 2.68) and the necessity of professional training for workers(favorable respondent = 3.71, unfavorable respondent = 2.56). Finally, the respondents favorable toward a risk assessment system showed higher scores on the awareness of calculating the proper number of negative pressure units(4.79) compared to unfavorable respondents(3.3). Conclusions: The opinions of asbestos abatement companies identified through the survey in this study can be usefully utilized as fundamental information to improve the risk assessment system.