• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2006.11a
• /
• pp.327-330
• /
• 2006

With the increasing requirements for the survey and development of the ocean, the demands on the of AUV(Autonomous Underwater Vehicle) technologies have been increased. Reconstruction and replay of the AUV motion on the basis of the data stored during the execution of mission, can help the development of control strategies for AUVs such as mission planning and control algorithms. While an AUV cruises for her mission, her attitude and position data are is recorded. The data can be used for visualization of the motion in off-line. However, because most of the position data gathered from acoustic sensors have long time-interval and include intermittent faulty signal, the replayed motion by the graphic simulator can not demonstrate the motion as a smooth movie. In this paper, interpolation methods are surveyed to reconstruct the AUV position data. Then, an efficient 3D visualization method for AUV motion using the interpolation method is proposed. Simulation results arc also included to verify the proposed method.

• Journal of Ocean Engineering and Technology
• /
• v.23 no.1
• /
• pp.48-53
• /
• 2009

Autonomous Underwater Vehicles (AUV's) provide an important means for collecting detailed scientific information from the ocean depths. The hull resistance of an AUV is an important factor in determining the power requirements and range of the vehicle. This paper describes a design method that uses Computational Fluid Dynamics (CFD) to determine the hull resistance of an AUV under development. The CFD results reveal the distribution of the hydrodynamic values (velocity, pressure, etc.) of an AUV with a ducted propeller. This paper also discusses the optimization of the AUV hull profile to reduce the total resistance. This paper demonstrates that shape optimization in a conceptual design is possible by using a commercial CFD package. Optimum design work to minimize the drag force of an AUV was carried out, for a given object function and constraints.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.4 no.1
• /
• pp.44-56
• /
• 2012

Autonomous Underwater Vehicles (AUVs) provide a useful means of collecting detailed oceano-graphic information. The hull resistance of an AUV is an important factor in determining the power requirements and range of the vehicle. This paper describes a procedure using Computational Fluid Dynamics (CFD) for determining the hull resistance of an AUV under development, for a given propeller rotation speed and within a given range of AUV velocities. The CFD analysis results reveal the distribution of the hydrodynamic values (velocity, pressure, etc.) around the AUV hull and its ducted propeller. The paper then proceeds to present a methodology for optimizing the AUV profile in order to reduce the total resistance. This paper demonstrates that shape optimization of conceptual designs is possible using the commercial CFD package contained in Ansys$^{TM}$. The optimum design to minimize the drag force of the AUV was identified for a given object function and a set of constrained design parameters.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2000.04a
• /
• pp.123-127
• /
• 2000

This paper deals with the ways how the AUV can detect and treat possible emergency situations during the mission. The emergency situations can be divided into two parts according to the zones where the situations take place-inner zone, and outer zone. This paper explains how each element of emergency situation is detected and treated, and as a result, introduce the algorithm of this procedure for the autonomous cruising.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2003.05a
• /
• pp.22-26
• /
• 2003

This paper presents a genetic algorithm based autonomic movement algorithm for an autonomous underwater vehicle(AUV) and verified it to simulation. Also, developed program that can do simulation on two dimension and three dimension in seabed environment. The presented algorithm is applicable to a escape from the recursive search and a development of obstacle avoidance system.

• Journal of Ship and Ocean Technology
• /
• v.11 no.2
• /
• pp.1-9
• /
• 2007

This paper describes the design and development of a hovering AUV constructed at Cheju National University and analyses the dynamic performance of the vehicle using simulation programs. The main purpose of this AUV is to carry out fundamental tests in its station keeping, attitude control, and desired position tracking. Its configuration is similar to the general ROV appearance for underwater works and its dimensions are 0.75m*0.5m*0.5m. It has 4 thrusters of 450 watts for longitudinal/lateral/vertical propulsion and is equipped with a pressure sensor for measuring water depth and a magnetic compass for measuring heading angle. The navigation of the vehicle is controlled by an on-board Pentium III-class computer, which runs with the help of the Windows XP operating system. These give us an appropriate environment for developing various algorithms needed for developing and advancing Hovering AUV.

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.173.4-173
• /
• 2001

This paper presents a stable nonlinear adaptive control for AUV(Autonomous Underwater Vehicle) by using neural network. AUV's dynamics are highly nonlinear, and their hydrodynamic coefficients vary with different operational conditions. In this paper, the nonlinear uncertainties of the AUV's dynamics are approximated by using LPNN(Linearly parameterized Neural Network). The presented controller is consist of three parallel terms; linear feedback control, sliding mode control, and adaptive control(LPNN). Lyapunov theory is used to guarantee the stability of tracking errors and neural network´s weights errors. Numerical simulations for nonlinear control of the AUV show the effectiveness of the proposed techniques.

• 제어로봇시스템학회:학술대회논문집
• /
• 2002.10a
• /
• pp.109.5-109
• /
• 2002

Autonomous underwater vehicles (AUVs) are unmanned underwater vessels to investigate sea environments, oceanography and deep-sea resources autonomously. Docking systems are required to increase the capability of the AUVs to recharge the batteries and to transmit data in real time in underwater. This paper presents a visual servo control system for an AUV to dock into an underwater station with a camera. To make the visual servo control system , this paper derives an optical flow model of a camera mounted on an AUV, where a CCD camera is installed at the nose center of the AUV to monitor the docking condition. This paper combines the optical flow equation of the camera with the AUV's equation o...

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.06a
• /
• pp.316-320
• /
• 2003

This paper introduces an autonomous underwater vehicle (AUV) model, ASUM, equipped with a visual servo control system to dock into an underwater station with a camera and motion sensors. To make a visual servoing AUV, this paper implemented the visual servo control system designed with an augmented state equation, which was composed of the optical flow model of a camera and the equation of the AUV's motion. The system design and the hardware configuration of ASUM are presented in this paper. ASUM recognizes the target position by processing the captured image for the lights, which are installed around the end of the cone-type entrance of the duct. Unfortunately, experiments are not yet conducted when we write this article. The authors will present the results for the AUV docking test.

• Journal of Ocean Engineering and Technology
• /
• v.11 no.1
• /
• pp.106-112
• /
• 1997

This paper describes the development of a test-bed vehicle named TAUV which can be a tool to evaluate the performance of a new control algorithm, operating software and the characteristics of sensors for an AUV. The test-bed AUV is designed to operate at depth of ten meters. It is 19.5kg in air and neural buoyancy in water and the dimension is $535{\times}400{\times}102mm$. TAUV is equipped with a magnetic compass, a biazial inclinometer, a rate gyro, a pressure sensor and an altitude sonae for measuring the motion of the vehicle. Two horizoltal thursters and two elevators are installed in order to propel and control the AUV. This paper persents the control system of TAUV which is based on a 16 bit single-chip microprocessor, 80c196kc, and the software architecture for the operating system. Experimental results are included to verify the performance of the TAUV.